Photo |
Title
|
Make | Model | Year | Price |
Barko 295 Loader with CSI Delimber & Bucksaw2003 Barko 295 Loader with CSI Delimber & Bucksaw. Hour meter reads 11,000 hours. Cummins 6BT engine starts and runs good. Delimber and bucksaw are in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. |
Barko | 295 | 2003 |
$43,500
|
|
Valmet Woodstar 546 Forwarder1994 Valmet Woodstar 546 Forwarder. Hours are unknown. Ford 4 cylinder turbo diesel engine. 28Lx26 tires are estimated at 60%, includes a set of double diamond studded ice chains. 600/55-26.5 tires are estimated at 50%. 2019 Hultdins SuperGrip grapple. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Valmet | Woodstar 546 | 1994 |
$43,500
|
|
Prentice 2384B w/ CSI 4400 Buck Saw & CTR 426 Delimber2012 Prentice 2384B Loader with CSI 4400 Buck Saw and CTR 426 Delimber. Hour meter reads 14,000 hours. Reman hydraulic pump and pilot pump. Boom is straight, minimal slack. CSI 4400 Buck Saw with an 18' table. CTR 426 delimber is in good working order. John Evans trailer. Cab has heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. |
Prentice | 2384B | 2012 |
$43,500
|
|
Timberjack 1210 8-Wheeled Forwarder1995 Timberjack 1210 8-Wheeled Forwarder. This machine has a Perkins engine, around 20,000 hours, rebuilt cylinders, tight center, boom has normal wear, 600 tires @ 50%, tracks in back, bogies in good working condition, has heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Timberjack | 1210 | 1995 |
$44,500
|
|
Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher1999 Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher. This equipment has an estimated 17,000 hours, 60" Siirro slasher table is in good working order. Rotobec grapple, Cummins 5.9 runs and starts good. Exhaust was just resealed, injectors were just resealed as well. Accumulator manifold was just resealed less then 200 hours ago. Pilot pump rebuilt 1,000 hours ago, right bank valve body rebuilt 1,500 hours ago. Swing pump rebuilt 1,500 hours ago, main pump was rebuilt 2,000 hours ago. Joystick controls. New LED lights. Heat. A/C is not working CB. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Barko | 160D | 1999 |
$44,500
|
|
CAT 559DS Log Loader2007 CAT 559DS Log Loader. Hour meter reads ~11,000 hours. CAT engine, runs and starts good. Strong hydraulics and cylinders. Carrier and hydraulic landing gear are in good working order. Tight boom, 360 grapple. Heat, A/C, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. |
CAT | 559DS | 2007 |
$44,500
|
|
Serco 170 Loader with Siiro 60" Slasher1993 Serco 170 Loader with Siiro 60" Slasher. John Deere engine starts and runs good. Loader sits on a 1979 Mack truck that works well. Loader is tight, has a brand new main lift cylinder. Blade is straight, new teeth. Hydraulic landing gear works as it should. Heat in cab. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Serco | 170 | 1993 |
$44,500
|
|
Timberjack 460D Skidder2001 Timberjack 460D Single Arch Grapple Skidder with Winch. Hour meter reads 12,000 hours. John Deere 6068 engine, powershift transmission. 30.5x32 tires are estimated at 90%. Center pins have a little slack. Recently serviced. Heat, A/C, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Timberjack | 460D | 2001 |
$44,500
|
|
John Deere 903J Feller Buncher with FR22 Head2008 John Deere 903J Feller Buncher with FR22 Head. Hour meter reads ~18,000 hours. Engine was redone at 12,500 hours. John Deere 6081H engine starts and runs good. Boom and stick bushing have been done at 15,000 hours. Strong hydraulics and cylinders. 24" single grouser pads, undercarriage is at 40%. Enclosed cab has heat, A/C, lights, Sure Grip joystick controls, & TMC computer system. FR22 head is 360° rotating. Saw and carbide teeth are in good shape. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada. |
John Deere | 903J | 2008 |
$44,900
|
|
John Deere 548E Skidder1994 John Deere 548E Grapple Skidder. Hour meter reads 9,579 hours. New injection pump, hydraulic pump, hoses, & glass. 28Lx26 Firestone tires, 1 is new, 3 are estimated at 70%. Heat, A/C, updated LED lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 548E | 1994 |
$45,000
|
|
HAHN HSW 110B Self Propelled Harvester ***SOLD***1993 HAHN HSW 110B Self Propelled Harvester. This equipment starts and runs good, no major oil leaks. This machine was rebuilt in 2004 with a new crate JD engine. list of repairs, rebuilt inside long stroke/delimber cylinder, new right top knife cylinder, rebuilt cab tilt cylinder, new alternator, replaced front tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located Northeast USA. ***SOLD*** |
Hahn | HWS 110B | 1993 |
$45,000
|
|
John Deere 690E with a Lim-mit 2000B Delimber1996 John Deere 690E with a Lim-mit 2000B Delimber. This equipment has a John Deere 6068T engine, runs and starts good, strong hydraulics and cylinders, boom cylinder is being rebuilt. drive motors and hoses in good working condition, U/C in good working order, 32" triple grouser pads. 2000B LIM-MIT delimber has straight boom, chains and roller in good working order, sharp knives, circular topping saw, Espar pre heat system, fuel heater, forestry guard package. Electronic idle will need work. Another 690E parts machine with a LIM-MIT delimber can be included. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Loader is located in Northcentral USA. |
John Deere | 690E | 1996 |
$45,000
|