Featured in Logging Equipment

Valmet 860 Double Bunk 6 Wheel Forwarder

$46,500

Sort By:

Photo	Title	Make	Model	Year	Price
	Timberjack 608S with 2005 Log Max 7000C *SOLD* 2001 Timberjack 608S Processor with 2005 Log Max 7000C Processing Head. Strong hydraulics and cylinders, ITR undercarriage has approximately 1,150 hours of use - rollers, sprockets and rails, 24" pads are in good shape. New pins and bushings in the boom 950 hours ago. 2005 Log Max 7000C is in very good condition, 5,960 hours, Logmate 402 computer, feed wheels and knives are in good shape, very little welding on head. Flex air reversible fan, Espar pre-heater system, heat, A/C, and LED lights. Machine is extremely straight and dry for it's age. All panels open and close as they should. No hydraulic leaks were visible. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. *SOLD*	Timberjack	608DS	2001	$Call for Price
	Hydro-Ax 611EX Feller Buncher 2001 Hydro-Ax 611EX Feller Buncher. Hour meter reads 8,657 hours. Cummins 6CT engine starts and runs good, 1,400 engine hours. 28L-26 tires are estimated at 80%. New lexan glass all the way around. Has a new skid plate. Enclosed cab has heat & new A/C system. S56 bunching head. Tight well maintained machine that's ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Hydro-Ax	611EX	2001	$29,500
	Valmet 921 with 370E Processing Head 2001 Valmet 921 with 2005 370E Processing Head. Hours are unknown. Valmet 634 6cyl turbo diesel engine starts and runs good. 750 bogie tires are in good condition, estimated at 80%. Front tires are estimated at 25%. Cranab crane with a 2005 370E processing head, measuring system is in good working order. New cab main bearing 600 hours ago, new A/C compressor in 2022. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Valmet	921	2001	$34,900
	Serco 170A Loader with 60" Slasher 2001 Serco 170A Loader with 60" Slasher. Hours meter reads 14,291 hours. John Deere engine. Boom is tight. 60" slasher included, blade and teeth are in good condition. Tires on the trailer are in good condition. Heat, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Serco	170A	2001	$39,500
	Timberjack 460D Skidder 2001 Timberjack 460D Single Arch Grapple Skidder with Winch. Hour meter reads 12,000 hours. John Deere 6068 engine, powershift transmission. 30.5x32 tires are estimated at 90%. Center pins have a little slack. Recently serviced. Heat, A/C, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Timberjack	460D	2001	$44,500
	Valmet 860 Double Bunk 6 Wheel Forwarder 2001 Valmet 860 Double Bunk 6 Wheel Forwarder. This machine has a Sisu engine, runs and starts good, strong hydraulics and cylinders, lift cylinder and bucket cylinder have been rebuilt. Cranab 850XL Crane, SureGip grapple, small leak on jib cylinder, few minor leaks on machine. Runs well, has a new computer. Has a mechanical throttle instead of electrical. Front tires are @ 70%, rear tires are @ 45%. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Valmet	860	2001	$46,500
	2001 HYUNDAI 130 2001 HYUNDAI 130 TRACKED HARVESTER 4BT CUMMINS FOUR ROLLER HEAD	Hyundai	130	2001	$49,500
	2001 TIMBERJACK 1270C 2001 TIMBERJACK 1270C WHEELED HARVESTER 6 CYL CUMMINS 758HD HEAD 700 RUBBER	Timberjack	1270C	2001	$54,900
	John Deere 653G Feller Buncher 2001 John Deere 653G Feller Buncher. Hour meter reads 8,605 hours. Reman John Deere 6068T engine with 2,000 hours. 24" double grouser pads, undercarriage is estimated at 70%, will need two bottom rollers. Resealed the rotary manifold in 2022. Waratah 20" felling head. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	John Deere	653G	2001	$55,000
	CAT 515 Skidder 2001 CAT 515 Single Arch Grapple Skidder with Winch. Hour meter reads 13,850 hours. CAT 3304 engine starts and runs good. 28Lx26 tires, rears estimated at 70%, fronts at 45%. Chains are in good condition. Single arch, with bunching grapple. New rotator. All cylinders were rebuilt last February. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	CAT	515	2001	$55,000
	CAT 311 Harvester with a Fabtek 4 Roller Head 2001 CAT 311 Harvester with a Fabtek 4 Roller Head. This machine has a new CAT engine, runs and starts good, strong hydraulics and cylinders, newer undercarriage with 2,500 hours, 22" pads, tight boom. Fabtek 4 roller head has new spikes on rollers, new chains, grab arms and hoses are in good working order, Upton computer, 33" Jet fit bar. Heat, A/C, and lights, air ride seat, good glass, quick couplers. Forestry Package. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	CAT	311	2001	$58,900
	Valmet 860 6 Wheeled Forwarder 2001 Valmet 860 6 Wheeled Forwarder. Hour meter reads 15,000 hours. Sisu engine, starts and runs good. Rear 710-/45-26.5 tires are estimated 40%. Front tires are estimated at 75% with one being new. Set of tracks at 20% are included. New A/C compressor and bogie bearings. Cranab 850 crane with minimal slack and a squirt boom. SureGrip grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Valmet	860	2001	$67,500