Featured in Logging Equipment
Photo |
Title
|
Make | Model | Year | Price |
1998 Hyundai 200 Processor with Fabtek Dangle HeadGreat running machine ,Fabtek forestry package, High walker, forestry cab, 1 owner |
Hyundai | Hyundai 200 High Walker | 1998 |
$Call for Price
|
|
Lemco 72" Saw Table ***SOLD***1998 72" Lemco Saw Table in good working condition. Will need a couple of hoses changed. Used sparingly for tree length and in good condition for age. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Lemco | 72 | 1998 |
$Call for Price
|
|
Timbco T415C Harvester with Ponsse H73 ***SOLD***1998 Timbco 415C Harvester with a 2006 Ponsse H73 Processing Head. Hour meter reads 8,786 hours. John Deere 6068T Engine. Starts and runs good. Single grouser pads. Undercarriage is at 70%. Pins and bushings are good. Very clean and straight unit, extendable boom, has a newer pump. The 2006 Ponsse H73 Processing Head has around 4500 hours. 30" Processing Head. Grab arms and feed rollers are in good working order. Enclosed cab has heat, a/c, radio, & lights. Dry & tight machine that's ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD*** |
Timbco | T415-C | 1998 |
$Call for Price
|
|
Tigercat 845B Feller Buncher w/ith a Koehning 22" ***SOLD***1998 Tigercat 845B Feller Buncher with a Koehning 22" Head. Hour meter reads 14,130 hours. Cummins 8.3 engine starts and runs good. 28" double grouser pads, undercarriage is estimated at 75%. Boom is tight. Finals have just been resealed. One of the hydraulic pumps has been recently replaced. Koehring head has a newer disc with good teeth. Cuts 22". Cab has heat, A/C. All manuals included. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Tigercat | 845B | 1998 |
$Call for Price
|
|
Eco Log 550B Processor with a Logmax 5000 Head ***SOLD***1998 Eco Log 550B Processor with a Logmax 5000 Head. This processor has many new parts on the Logmax head, new main pump in 2013, rebuilt pump drive assembly this spring, both drive pumps have been gone through, all fluids changed this spring, four chains, tires are @ 70%, new crank bearings this spring and new piston rings, 15,000 hours. Machine is only used for 6 months of the year for the past three years, seasonal operation. Comes with spare hoses, filters, and any other misc. parts associated with it, also has brand new parts for the head. A/C does not work, heater does, has a 24 volt system. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Eco Log | 550B | 1998 |
$22,500
|
|
Timberjack 608 Feller Buncher with 22" Felling Head1998 Timberjack 608 Feller Buncher with 22" Felling Head. Hours are unknown. Cummins engine starts and runs good. 24" single grouser pads, undercarriage estimated at 50%. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. |
Timberjack | 608 | 1998 |
$25,000
|
|
Ponsse Ergo Processor with H73 Processing Head1998 Ponsse Ergo with H73 Processing Head. Hour meter reads 22,000 hours. CAT engine starts and runs good. 700 tires are estimated at 70%. Tight center, bucket, and boom. Cab leveling doesn't work. Bogies are in good working order. Good turn table. H73 processing head is in good working order. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Ponsse | Ergo | 1998 |
$28,500
|
|
John Deere 843G Feller Buncher1998 John Deere 843G Feller Buncher. Less than 500 hours on rebuilt engine. 24.5-32 tires are estimated at 40, includes chains that are estimated at 40%. Fresh service, new hoses, & new teeth on the head. Heat, A/C, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
John Deere | 843G | 1998 |
$29,000
|
|
Timberjack 460 Skidder1998 Timberjack 460 Grapple Skidder with Winch. Cummins 5.9 engine starts and runs good. New injectors, windows, and rebuilt transmission. 28Lx26 tires are estimated at 85%. Arch pins and center pins are tight. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timberjack | 460 | 1998 |
$29,500
|
|
Prentice 310E Truck Mount Log Loader1998 Prentice 310E Truck Mount Log Loader. Hour meter reads 8,970 hours. Cummins 5.9 engine starts and runs good. Good swing bearing, strong hydraulics, tight boom with a Finnish grapple. Truck is not road legal, great for yard work, runs and drives. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. |
Prentice | 310E | 1998 |
$31,500
|
|
Lemco XLT 280 Loader with Siiro 60" Slasher1998 Lemco XLT 280 Loader with Siiro 60" Slasher. Hour meter reads 9,626 hours. John Deere 6068 engine starts and runs good. Bypass grapple. Slasher saw hookups and self-propelled carrier. Tires are estimated at 70%. Siiro 60" Slasher with a straight saw & good teeth can be included for an additional $7,000. Bangboard on chassis is included. Heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Lemco | XLT 280 | 1998 |
$33,000
|
|
Timberjack 610 Forwarder1998 Timberjack 610 Single Bunk Forwarder. Hour meter reads 468 hours but is incorrect. 18.4-34 tires are estimated at 65% for the rears, 25% for the fronts. 12 bolt axles. Blade is in good condition. Boom is tight, main boom cylinder could be repacked. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Timberjack | 610 | 1998 |
$34,500
|