Featured in Logging Equipment
Photo |
Title
|
Make | Model | Year | Price |
John Deere 648GIII Skidder2001 John Deere 648GIII Grapple Skidder with Winch. Hour meter reads 14,500 hours. Newer engine and hydraulic pump. 30.5x32 are estimated at 20% with a set of new chains on the rear. Winch is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
John Deere | 648GIII | 2001 |
$56,500
|
|
Timbco 820D Forwarder2001 Timbco 820D Forwarder. Hour meter reads 8,399 hours. Cummins 8.3L engine. 710/45-26.5 tires are estimated at 85%. Originally a clam bunk forwarder, the clam bunk can be included for an additional cost. Center & loader are tight. Blade is in good condition. This unit is setup to be a combo machine, a 2008 Ponsse H8 Harvesting Head with top saw can be included for an additional cost. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA. |
Timbco | 820D | 2001 |
$152,500
|
|
Valmet 921 with 370E Processing Head2001 Valmet 921 with 2005 370E Processing Head. Hours are unknown. Valmet 634 6cyl turbo diesel engine starts and runs good. 750 bogie tires are in good condition, estimated at 80%. Front tires are estimated at 25%. Cranab crane with a 2005 370E processing head, measuring system is in good working order. New cab main bearing 600 hours ago, new A/C compressor in 2022. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Valmet | 921 | 2001 |
$34,900
|
|
2001 Fabtek 133 Harvester2001 FABTEK 133 TRACKED HARVESTER 6 CYL DEERE FABTEK FOUR ROLLER HEAD |
Fabtek | 133 | 2001 |
$75,000
|
|
2001 HYUNDAI 1302001 HYUNDAI 130 TRACKED HARVESTER 4BT CUMMINS FOUR ROLLER HEAD |
Hyundai | 130 | 2001 |
$49,500
|
|
Timberjack 460D Skidder2001 Timberjack 460D Single Arch Grapple Skidder with Winch. Hour meter reads 12,000 hours. John Deere 6068 engine, powershift transmission. 30.5x32 tires are estimated at 90%. Center pins have a little slack. Recently serviced. Heat, A/C, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Timberjack | 460D | 2001 |
$44,500
|
|
Timbco 445D Feller Buncher with Timbco Head ***ON HOLD***2001 Timbco 445D Feller Buncher with Timbco Head. Hour meter reads 16,000 hours. Cummins 8.3L engine, hydrostatic transmission. 24" single grouser pads, Undercarriage is estimated at 65%, newer idler and CAT rails, could use sprockets. New alternator. Radiator was pulled to replace bushings and hoses. Hydraulic tank has all new filters and fluids. Finals are in good shape. Recent work on the head, 28" bar saw. Spare chains. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD*** |
Timbco | 445D | 2001 |
$68,500
|
|
Timberjack 608S with 2005 Log Max 7000C ***SOLD***2001 Timberjack 608S Processor with 2005 Log Max 7000C Processing Head. Strong hydraulics and cylinders, ITR undercarriage has approximately 1,150 hours of use - rollers, sprockets and rails, 24" pads are in good shape. New pins and bushings in the boom 950 hours ago. 2005 Log Max 7000C is in very good condition, 5,960 hours, Logmate 402 computer, feed wheels and knives are in good shape, very little welding on head. Flex air reversible fan, Espar pre-heater system, heat, A/C, and LED lights. Machine is extremely straight and dry for it's age. All panels open and close as they should. No hydraulic leaks were visible. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Timberjack | 608DS | 2001 |
$Call for Price
|
|
Fabtek FT-133 with Fabtek 4 Roller Head2001 Fabtek FT-133 with Fabtek 4 Roller Head. Hour meter reads 15,500 hours. John Deere 6068 crate engine installed 800 hours ago. New hydraulic pump, sprockets, idlers, rails, & rollers were also done at that time. 24" double grouser pads. Proheat preheat system. Boom is tight. New Parker touchscreen CPU and joysticks. New Lexan glass. Heat, A/C, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Fabtek | FT-133 | 2001 |
$80,000
|
|
Hydro-Ax 611EX Feller Buncher2001 Hydro-Ax 611EX Feller Buncher. Hour meter reads 8,657 hours. Cummins 6CT engine starts and runs good, 1,400 engine hours. 28L-26 tires are estimated at 80%. New lexan glass all the way around. Has a new skid plate. Enclosed cab has heat & new A/C system. S56 bunching head. Tight well maintained machine that's ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Hydro-Ax | 611EX | 2001 |
$29,500
|
|
2001 TIMBERJACK 1270C2001 TIMBERJACK 1270C WHEELED HARVESTER 6 CYL CUMMINS 758HD HEAD 700 RUBBER |
Timberjack | 1270C | 2001 |
$54,900
|
|
Ponsse Bison Forwarder ***ON HOLD***2001 Ponsse Bison 6 Wheel Double Bunk Forwarder. This equipment has a newer Mercedes Benz 4 cylinder engine with approximately 6,000-7,000 hours, runs and starts good. 13,000 total machine hours. New center pins and big bearing. New rear brake, new controller, strong hydraulics and cylinders. Tight boom and grapple. Heat, A/C, and lights. Tires are in good working order with a set of tracks. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD*** |
Ponsse | Bison | 2001 |
$87,500
|
- 1
- 2