Delimbers For Sale
Featured in Delimbers
| Photo |
Title
|
Make | Model | Year | Price |
|
Towable CTR DelimberTowable CTR Delimber. Has been completely gone through, in good working order. Tires are in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA. |
CTR | - | - |
$23,500
|
|
Link Belt LS-2800 with a Limmitt 2000B Delimber ***SOLD***1989 Link Belt LS-2800 with a 1997 Limmitt 2000B Delimber. Isuzu 6 cyl. engine, runs and starts good, newer injectors. Straight boom, rollers and cables all in good order. New relief valves on the rollers & a new barrel for one of the lift cylinders. Re-packed right hand roller cylinder, new rubber bumper. Radiator was just repaired and serviced, new windshield and some cab glass, new starter, temp gauge, & shutoff solenoid. Newer pump. Two new pressure relief valves. Heat in cab. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Link Belt | LS-2800 | - |
$21,500
|
|
Komatsu PC200 LC-5 with a Denis D-3200-T Delimber1989 Komatsu PC200 LC-5 with a Denis D-3200-T Delimber. This equipment has a Komatsu engine, runs and starts good, Hour meter reads 10,594 hours, strong hydraulics and pumps. Straight boom and good cables, knives are in good working order, undercarriage is in good condition, 30" triple grouser pads. Chains and sprockets are in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | PC200 LC-5 | 1989 |
$22,500
|
|
John Deere 590D Delimber with Propac 5131990 John Deere 590D Delimber with Propac 513. New John Deere 4276 engine and turbo with 400 hours. Hydraulics are strong and undercarriage is in good working order but will need a few rollers. Propac 513 with topping knives. Heat & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 590D | 1990 |
$24,000
|
|
John Deere 690D with Propac 453 Delimber1990 John Deere 690D with Propac 453 Delimber. 30" triple grouser pads, undercarriage is estimated at 75%. Brand new head with new cylinders, new hydraulic pump, receipts available upon request. Heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
John Deere | 690D | 1990 |
$38,500
|
|
Caterpillar 225D with a Denis Stroke Delimber1993 Caterpillar 225D with a Denis (Denharco) Stroke Delimber. This machine has a CAT 3208 newer engine, Hour meter reads 5,000 hours, runs and starts good, strong hydraulics and cylinders, few minor leaks. Decent undercarriage, one top roller will need attention, triple grouser pads, Denis delimber has straight boom, all cables and hose up to par, has a butt and topping saw, knives are in decent condition. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada. |
CAT | 225D | 1993 |
$22,500
|
|
Komatsu PC250 Carrier with a Limmit 2200B Delimber1994 Komatsu PC250 Carrier with a Limmit 2200B Delimber. This equipment has a Komatsu 6 cyl. engine. Owner stated this machine ran good when it was parked but may need a tune up, engine has been rebuilt, strong hydraulics has a few leaks, undercarriage is @ 40%, 28" triple grouser pads, straight boom has been re-enforced in a few spots, decent knives and grab arms, swing lock has been bypassed may need a wiring harness. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | PC250 | 1994 |
$24,900
|
|
John Deere 690 with Propac 453 Delimber ***SOLD***1995 John Deere 690 with Propac 453 Delimber. John Deere 6068T engine starts and runs good. Strong hydraulics and cylinders, drive motors and hoses in good working condition, U/C in good working order, 32" triple grouser pads. Propac 453 Delimber is tight & in good working order. Cab has heat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD*** |
John Deere | 690 | 1995 |
$17,500
|
|
John Deere 690E with a Lim-mit 2000B Delimber1996 John Deere 690E with a Lim-mit 2000B Delimber. This equipment has a John Deere 6068T engine, runs and starts good, strong hydraulics and cylinders, boom cylinder is being rebuilt. drive motors and hoses in good working condition, U/C in good working order, 32" triple grouser pads. 2000B LIM-MIT delimber has straight boom, chains and roller in good working order, sharp knives, circular topping saw, Espar pre heat system, fuel heater, forestry guard package. Electronic idle will need work. Another 690E parts machine with a LIM-MIT delimber can be included. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Loader is located in Northcentral USA. |
John Deere | 690E | 1996 |
$45,000
|
|
CAT 320L with Denharco 3000T Delimber1996 CAT 320L with Denharco 3000T Delimber. Hour meter reads 21,116 hours. 24" triple grouser pads, undercarriage is estimated at 75%. Dehnarco DT3000 delimber is in good condition. Front window is cracked. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
CAT | 320L | 1996 |
$13,000
|
|
LinkBelt 2800 with Propac 453 Delimber ***ON HOLD***1996 LinkBelt 2800 with Propac 453 Delimber. Hour meter reads 18,249 hours. Isuzu 6BG1T engine. 32" triple grouser pads, undercarriage is estimated at 80%. Propac 453 delimber is in good working order. Topping saw. Boom is straight. Grab arms are tight. Forestry package, heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD*** |
Link Belt | 2800 | 1996 |
$41,500
|
|
CAT 322 with Denharco 3000 Delimber1996 CAT 322 with Denharco 3000 Delimber. Hour meter reads 14,300 hours. New engine and winch motor with 300 hours. Triple grouser pads, undercarriage is estimated at 50%. Denharco 3000 delimber is straight & in good working order. Topping saw. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada. |
CAT | 322 | 1996 |
$Call for Price
|