Featured in Prentice

Sort By:   GridGallery
Photo Title
Make Model Year Price
Prentice 120 Log Loader

Prentice 120 Log Loader

Prentice 120 Log Loader. This equipment has a butt grapple, non-continuous rotation, joystick controls. Pump and mounting hardware included. Both cylinders have been redone. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Prentice 120 Unknown
$14,900
Prentice 180C Loader

Prentice 180C Loader

1990 Prentice 180C Loader. Hours are unknown. Cummins 4BT reman engine starts and runs good. Boom and grapple are tight. Outriggers in good working order. Needs a few pieces of glass. Heat and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Prentice 180C 1990
$20,000
Prentice 210D Loader on Mack Truck

Prentice 210D Loader on Mack Truck

1989 Prentice 210D Loader on 1989 Mack Truck. 183,397 miles on the truck, 12,573 hours on the loader. John Deere 6059T engine, & Eaton Fuller 10 speed transmission Bypass grapple with joystick controls. Oil pan is dry, cylinders overall pretty dry, oil lines are wet. 425/65 r22.5X8.25 Bridgestone tires. Tires are at about 80%. Red Dot aftermarket heater. Truck will be removed soon and loader will be placed on carrier if needed. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Prentice 210D 1989
$19,000
Prentice 210D Log Loader

Prentice 210D Log Loader

1995 Prentice 210D Log Loader. Hour meter reads 11,333 hours. 5.9 Cummins engine. Evans carrier that is in good shape, hydraulic landing gear is in good working order. Dead heel with Rotobec bypass bucket. Lever controls, good glass, heat, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA

Prentice 210D 1995
$15,000
Prentice 210D Self-Propelled Loader with 60" Siiro Slasher

Prentice 210D Self-Propelled Loader with 60" Siiro Slasher

Prentice 210D Self-Propelled Loader with 60" Siiro Slasher. Hour meter reads 16,482 hours. John Deere 6059T engine starts and runs good but will need a head gasket. 60" Siiro Slasher has a cracked blade and the ears that hold the motor will need to be welded. All the cylinders on the boom have been rebuilt. Heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Prentice 210D Unknown
$17,000
Sterling Acterra with Prentice 2124 Loader

Sterling Acterra with Prentice 2124 Loader

2007 Sterling Acterra with Prentice 2124 Loader. Odometer reads 177,000 miles. CAT C7 engine, 6 speed high/low. Axle & diff lock. Newer front tires, rear tires estimated at 75%, brakes in good working order. Prentice 2124 extendaboom loader, 25' reach. Rotobec log grapple. All cylinders on grapple were just repacked. 18' dump bed, 27 cubic yard box. Oil change, new Heui pump, and turbo were just done. Bed has some surface rust, frame is in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Prentice 2124 -
$59,500
Prentice 2384 Loader with Bucksaw & CTR 426 Delimber

Prentice 2384 Loader with Bucksaw & CTR 426 Delimber

2009 Prentice 2384 Loader with Bucksaw & CTR 426 Delimber. Hour meter reads 17,457 hours. Cummins engine starts and runs good. New compressor and bearing, no turntable slack. Bucksaw and CTR 426 delimber are in good working order. Joystick controls are tight. Kodiak Series 4 trailer has good tires and brakes. Heat, A/C, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA.

Prentice 2384 2009
$61,500
Prentice 2384B w/ CSI 4400 Buck Saw & CTR 426 Delimber

Prentice 2384B w/ CSI 4400 Buck Saw & CTR 426 Delimber

2012 Prentice 2384B Loader with CSI 4400 Buck Saw and CTR 426 Delimber. Hour meter reads 14,000 hours. Reman hydraulic pump and pilot pump. Boom is straight, minimal slack. CSI 4400 Buck Saw with an 18' table. CTR 426 delimber is in good working order. John Evans trailer. Cab has heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.

Prentice 2384B 2012
$43,500
Prentice 280D Log Loader

Prentice 280D Log Loader

2004 Prentice 280D Log Loader. This machine has a John Deere engine, runs and starts good, has been well maintained, strong hydraulics, tight boom and grapple, lower frame has been reinforced, tight control, Pitts carrier, good brakes and tires, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Prentice 280D 2004
$34,900
Prentice 310E Truck Mount Log Loader

Prentice 310E Truck Mount Log Loader

1998 Prentice 310E Truck Mount Log Loader. Hour meter reads 8,970 hours. Cummins 5.9 engine starts and runs good. Good swing bearing, strong hydraulics, tight boom with a Finnish grapple. Truck is not road legal, great for yard work, runs and drives. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA.

Prentice 310E 1998
$31,500
Prentice 384 Loader Mounted on a Mack Truck

Prentice 384 Loader Mounted on a Mack Truck

2004 Prentice 384 Loader on Mack Truck. Hour meter reads 3,791 hours. John Deere 6059T engine. This unit was used in storm damage in Florida, has been mostly on pavement, the last 600 hours in the woods. Has a slasher hookup but has never been hooked up to a saw. Original grapple is tight. Dead heel. Mack truck is semi-roadworthy but mostly used in woods. No blowby but only used in shorter trips. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA.

Prentice 384 2004
$51,500
Prentice 410E Loader with Ground Saw & Delimber  *ON HOLD*

Prentice 410E Loader with Ground Saw & Delimber *ON HOLD*

1999 Prentice 410E Loader, Ground Saw, and CTR Pull Through Delimber. This equipment has a Cummins engine, runs and starts good, strong hydraulics, tight joystick controls, tight boom, main cylinder was just rebuilt, continuous rotation grapple, Delimber and ground saw are in good working order, decent tires and brakes, heat, lights, A/C is not working. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***ON HOLD***

Prentice 410E 1999
$33,500