2015 Morbark 40/36 Chipper. Hour meter reads 2,955 hours. CAT 765 HP engine starts and runs good. No dents on the belly. Drum pockets are in good working order, drum has some welds. Feed chain and sprocket show no wear, & hydraulics are strong. Chassis and frame are good, chute frame has some welding near blower. Tires and brakes are in excellent condition. LED display. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

2011 Morbark 40/36 Drum Chipper. Hour meter reads 3,700 hours. CAT C18 engine starts and runs good. Advantage 3 drum is in good condition. 23" chipping capacity. 40"x39" infeed opening. Hydraulic knuckleboom loader with 23' extended boom reach. 2537 log grapple with 360° continuous rotation. Single grouser pads, undercarriage is estimated at 70%. Valve banks are dry and clean. Espar preheater. Enclosed cab has heat & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

2009 Morbark 40/36 Whole Tree Drum Chipper. Hour meter reads 5,500 hours. Newer CAT C15 630 HP engine has 4,000 hours. Newer style Vantage drum is in good condition. Anvil has been redone & upgraded bed chains at 4,000 hours. New clutch disc in 2022. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

1995 Morbark 23WCL Whole Tree Chipper. Hour meter reads 2,604 hours. CAT 3412 engine starts and runs good. Disc chipper. 30 knives included. Also includes a jig to solder knives. Brand new anvil. 3 knife system, 3/4 chip size. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

1994 Morbark 23NCL Whole Tree Chipper. 850 HP CAT 3412 with 4,600 hours on in-frame overhaul. Top feed chute. Front of engine resealed. New drive belt and Poly chain. Does not burn any oil. Starts well in cold weather. Cooling system in good shape. Clutch in good shape. All new liners in 2021 on the chipper. Babbit 8 knife system installed. New remote system installed that controls all moving parts on the chipper. 8 knife disc is in good shape, set up for 7/8" chips. AR 450 face plates on disc less than 3 years old. New bearings on feed rollers, sprockets and chains recently replaced. Frame is in good shape. Air compressor included. Tires are in good shape and owner will check hubs and brakes at time of sale. Chipper was converted from a WCL, professionally done. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is lcoated in Canada.

1979 Morbark 22RXL Whole Tree Chipper. Full factory rebuild in 2004. CAT 3412, 800 HP engine. Twin disc clutch. Feed roller bearings, knives, & feed chains are in good condition. Produces 7/8" chips. 2014 Hood 8000 loader with Heat & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.