Valmet Forwarders For Sale
Featured in Valmet
| Photo |
Title
|
Make | Model | Year | Price |
|
Valmet 544 ForwarderValmet 544 Forwarder. Hour meter reads 2,542 but does not work. Ford engine. 23.1x26 tires are estimated at 90%+. 360 rotation bucket. Center is tight, boom is tight. Unit runs good and is ready to work. Heat & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Valmet | 544 | Unknown |
$36,000
|
|
Valmet 544 Series 1 Forwarder ***SOLD***Valmet 544 Series 1 Single Bunk Forwarder. Hours are unknown, meter reads 2,542 hours. Engine has been gone through top to bottom, transmission has been gone through. Receipts available upon request. Pins and bushings, brakes, and rear end have all been gone through. Valve bank was just replaced and is like new. Hydraulic pump is newer, replaced in 2020. Heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Valmet | 544 | Unknown |
$34,500
|
|
Valmet 840.4 Forwarder2010 Valmet 840.4 Forwarder. Hour meter reads 19,482 hours. Bogie tires are estimated at 35%, front tires are estimated at 80%. Includes a set of tracks and chains. Unit has been very well-maintained, owner is retiring. Crane, center pins, and grapple are tight. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Valmet | 840.4 | 2010 |
$66,500
|
|
Valmet 840.2 Forwarder2005 Valmet 840.2 Forwarder. Hour meter reads 23,972 hours. Sisu 6cyl engine. 23.1x26 tires on the front are estimated at 90%, 600 tires on the rear estimated at one new, two at 50%, and one at 20%. Boom is tight, center pins are tight, steering cylinders have a little play. All bearings in the rear were replaced, one repacked cylinder on the boom, newer injector lines and fuel filter housing. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Valmet | 840.2 | 2005 |
$66,500
|
|
Valmet 840.2 Forwarder2005 Valmet 840.2 8 Wheeled Forwarder. Hour meter reads 23,634 hours. Sisu engine starts right up and runs good. Turbo is in good condition. 700/45-26.5 tires are estimated at 40%, includes a set of tracks estimated at 50%. Blade option. Bucket has some wear and the main boom cylinder has a minor leak around the vapor seal. Webasto preheat system. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Valmet | 840.2 | 2005 |
$56,900
|
|
Valmet 644 Forwarder2001 Valmet 644 Single Bunk Forwarder. Hour meter reads 13,204 hours. New turbo. Tires are estimated at 80-90%. Center, crane, and grapple are tight. Unit is working every day. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Valmet | 644 | 2001 |
$47,500
|
|
Valmet 860 Double Bunk 6 Wheel Forwarder2001 Valmet 860 Double Bunk 6 Wheel Forwarder. This machine has a Sisu engine, runs and starts good, strong hydraulics and cylinders, lift cylinder and bucket cylinder have been rebuilt. Cranab 850XL Crane, SureGip grapple, small leak on jib cylinder, few minor leaks on machine. Runs well, has a new computer. Has a mechanical throttle instead of electrical. Front tires are @ 70%, rear tires are @ 45%. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Valmet | 860 | 2001 |
$46,500
|
|
Valmet 860 6 Wheeled Forwarder2001 Valmet 860 6 Wheeled Forwarder. Hour meter reads 15,000 hours. Sisu engine, starts and runs good. Rear 710-/45-26.5 tires are estimated 40%. Front tires are estimated at 75% with one being new. Set of tracks at 20% are included. New A/C compressor and bogie bearings. Cranab 850 crane with minimal slack and a squirt boom. SureGrip grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Valmet | 860 | 2001 |
$67,500
|
|
2000 VALMET 6462000 VALMET 646 DOUBLE BUNK FORWARDER 4 CYL CUMMINS POWERSHIFT JOYSTICK CONTROLS SQUIRT BOOM BYPASS BUCKET 700 HOURS ON NEW MOTOR |
Valmet | 646 | 2000 |
$75,000
|
|
Valmet 646 Forwarder1999 Valmet 646 Double Bunk Forwarder. Hour meter reads 18,124 hours. Cummins 4BT engine. Crane, center pins, and grapple are tight. 28Lx26 tires on the front, 600 tires in the rear, estimated 40-60%. Can include a set of tracks for an additional $6,000. Newer turbo, and new bearings and seals in the rear end. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Valmet | 646 | 1999 |
$55,000
|
|
Valmet 840 6 Wheeled Forwarder1999 Valmet 840 6 Wheeled Forwarder. Hour meter reads ~13,000 hours. This machine has a Sisu engine, extenda-boom, tracks and chains, good reliable forwarder, working daily. Major work done includes, valve bank re-seal, rear differential re-seal and brakes, new center oscillation bearings, main boom line bored, new pins and bushings, extenda-boom wear pads, radiator removed and chemical washed, starter and alternator, new A/C pump and expansion valve, new front tire, the rest are 60% or so, new water pump, grapple pins and bushings, new tracks. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Valmet | 840 | 1999 |
$38,000
|
|
Valmet 546 Forwarder1999 Valmet 546 Forwarder. Hour meter reads 6,000 some hours but doesn't work. Valve bank has been completely rebuilt. New center section, fully rebuilt, cylinder got new rods and seals. New 23.1x26 front tire. Bogie tires are estimated at 15-30%. Newer ponsse grapple is tight. New glass. Heat works, A/C is there but not sure if functional. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Valmet | 546 | 1999 |
$31,000
|
- 1
- 2