Advanced Search

Slasher/Loader For Sale

Featured in Slasher/Loader

NO FEATURED LISTINGS TO DISPLAY

Sort By:

Grid

Gallery

Photo	Title	Make	Model	Year	Price
	Western Star Truck with Serco 125 Loader & Siiro *SOLD* 1981 Western Star Truck with a 1994 Serco 125 Loader and Siiro 60” slasher Saw. This equipment has good tires all around on truck and slasher, Detroit engine in the truck, runs and starts good, 6 cyl. John Deere power in the loader, few leaks but starts right up and runs out good. Plugin block heater, strong hydraulics and cylinders, boom and grapple have decent pins and bushings. Slasher has straight blade and good teeth. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Serco	125	1994	$Call for Price
	Timberking TK560DS Loader with Propac 60" Slasher 2008 Timberking TK560DS Loader. Hour meter reads ~10,000 hours. Perkins 6cyl diesel engine. Boom is tight, live heel, hydraulic landing gear is in good working order. Propac 60" Slasher has a good blade and teeth. SureGrip joystick controls. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.	Timberking	TK560DS	2008	$68,500
	Tigercat 234B Loader w/CSI 264 Delimber & CSI Buck Saw 2018 Tigercat 234B Loader with CSI 264 Delimber and CSI DL-4400 Bucksaw. Hour meter reads 4,395 hours. Loader is tight, 32' boom. CSI DL-4400 bucksaw has less than 300 hours on it, 264 delimber is in good working order. Trailer is in good condition, tires estimated at 30%. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Tigercat	234B	2018	$203,500
	Siiro 60" Adjustable Slasher Table *ON HOLD* 1993 Siiro 60" Adjustable Slasher Table. This equipment is set up to cut 8' and 16' logs, newer saw motor 1,000 hours ago, strong hydraulics, straight disc could use a few teeth, solid frame, decent tires. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *ON HOLD*	Siiro	60	1993	$7,500
	Serco 300 Self-Propelled Loader and Hanfab 72" *SOLD* 2012 Serco 300 Self-Propelled Loader and 2001 Hanfab 72" Slasher. Hour meter reads 14,856 hours. 4,500 hours on newer engine, newer injectors with 1,000 hours. Front & rear ends were replaced in the last year. New webasto preheat system. Brakes and lights on the carrier are in good working order. 2001 Hanfab 72" Slasher has been gone through, no cracks or welds. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Serco	300	2012	$Call for Price
	Serco 170A Loader with 60" Slasher 2001 Serco 170A Loader with 60" Slasher. Hours meter reads 14,291 hours. John Deere engine. Boom is tight. 60" slasher included, blade and teeth are in good condition. Tires on the trailer are in good condition. Heat, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Serco	170A	2001	$39,500
	Serco 170 Loader with Siiro 60" Slasher 1993 Serco 170 Loader with Siiro 60" Slasher. John Deere engine starts and runs good. Loader sits on a 1979 Mack truck that works well. Loader is tight, has a brand new main lift cylinder. Blade is straight, new teeth. Hydraulic landing gear works as it should. Heat in cab. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Serco	170	1993	$44,500
	Prentice 384 Loader with Riley 6600 Delimber *SOLD* 2006 Prentice 384 Loader and a Riley 6600 Delimber with Topping Saw. Owner stated that this unit has no engine, Cummins 5.9 engine was removed. Entire fuel system has been replaced recently - 4 injectors, fuel pump, injection pump, transfer pump, injector lines and supply lines. Tight pins in boom, strong hydraulics, hydraulic pump has been replaced recently. Owner said that this loader is on a Kodiak trailer with hydraulic landing gear, joystick controls have been rebuilt. Owner said that this loader will need a new instrument panel or to be re-wired. Both the OEM and Cummins wire harnesses have been replaced from underneath cab to engine. All paperwork available on recent updates and repairs. Tires 60%, good brakes, Heat and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southwest USA. is located in Southwest USA. REDUCED from 18,900. *SOLD*	Prentice	384	2006	$Call for Price
	Prentice 210D Self-Propelled Loader with 60" Siiro Slasher Prentice 210D Self-Propelled Loader with 60" Siiro Slasher. Hour meter reads 16,482 hours. John Deere 6059T engine starts and runs good but will need a head gasket. 60" Siiro Slasher has a cracked blade and the ears that hold the motor will need to be welded. All the cylinders on the boom have been rebuilt. Heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Prentice	210D	-	$17,500
	Prentice 210D Loader with Adjustable Buck Saw 1984 Prentice 210D Loader with Adjustable Buck Saw. This equipment has a rebuilt John Deere engine, runs and starts good, has paper work, strong hydraulics and cylinders, boom has a little play not bad, newer 360 grapple, carrier and down riggers in good working condition, heat, and lights. CTR adjustable buck saw has a 52" bar & butt plate. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.	Prentice	210D	1984	$18,500
	Mack Truck with a Lemco 185 Loader & 60" Lemco Slasher 1976 Mack Truck with a Lemco 185 Loader & 60" Lemco Slasher. This loader has a John Deere 6 cyl. engine, runs and starts good, Truck has a 300 engine, runs and starts good, loader has all new O-rings and seals, cylinders have all been redone, joy stick controls, tight boom and grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Mack	-	1976	$26,500
	Lemco XLT 185 Self Propelled Log Loader w/ 60" Slasher 1998 Lemco XLT 185 Self Propelled Log Loader with 60" Lemco Slasher. This equipment has a John Deere engine, runs and starts good, strong hydraulics and cylinders, all valve banks have been resealed, Sta-Lite self propelled carrier is in good working order, 60" Lemco slasher, straight blade, good teeth, tight boom and grapple, live heal, heat, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Lemco	XLT 185	1998	$36,500

1
2
3
4

Browsing Filters

1976 (1)
1984 (1)
1985 (1)
1989 (1)
1992 (1)

Show More

Our Sponsors