Featured in Slasher/Loader

Sort By:   GridGallery
Photo Title
Make Model Year Price
Timberking TK560DS Loader with Propac 60" Slasher

Timberking TK560DS Loader with Propac 60" Slasher

2008 Timberking TK560DS Loader. Hour meter reads 10,862 hours. Perkins 6cyl diesel engine. Boom is tight, live heel, hydraulic landing gear is in good working order. Propac 60" Slasher has a good blade and teeth. SureGrip joystick controls. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Timberking TK560DS 2008
$50,000
Tigercat 234B Loader w/CSI 264 Delimber & CSI Buck Saw

Tigercat 234B Loader w/CSI 264 Delimber & CSI Buck Saw

2018 Tigercat 234B Loader with CSI 264 Delimber and CSI DL-4400 Bucksaw. Hour meter reads 4,395 hours. Loader is tight, 32' boom. CSI DL-4400 bucksaw has less than 300 hours on it, 264 delimber is in good working order. Trailer is in good condition, tires estimated at 30%. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Tigercat 234B 2018
$203,500
Siiro 60" Adjustable Slasher Table ***ON HOLD***

Siiro 60" Adjustable Slasher Table ***ON HOLD***

1993 Siiro 60" Adjustable Slasher Table. This equipment is set up to cut 8' and 16' logs, newer saw motor 1,000 hours ago, strong hydraulics, straight disc could use a few teeth, solid frame, decent tires. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD***

Siiro 60 1993
$7,500
Serco 170A Loader with Siiro 60" Slasher

Serco 170A Loader with Siiro 60" Slasher

2005 Serco 170A Loader with Siiro 60" Slasher. Hour meter reads 10,928 hours. John Deere 6068 engine. Loader is tight & dry. Savage carrier. Good tires and all outriggers work. Dead heel. Rebuilt bucket. New batteries and Webasto preheater. New pins and bushings and repacked the main lift cylinder. Siiro 60" slasher, good blade & tires. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Serco 170A 2005
$56,000
Serco 170A Loader with 60" Slasher

Serco 170A Loader with 60" Slasher

2001 Serco 170A Loader with 60" Slasher. Hours meter reads 14,291 hours. John Deere engine. Boom is tight. 60" slasher included, blade and teeth are in good condition. Tires on the trailer are in good condition. Heat, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Serco 170A 2001
$39,500
Serco 170 Loader with Siiro 60" Slasher

Serco 170 Loader with Siiro 60" Slasher

1993 Serco 170 Loader with Siiro 60" Slasher. John Deere engine starts and runs good. Loader sits on a 1979 Mack truck that works well. Loader is tight, has a brand new main lift cylinder. Blade is straight, new teeth. Hydraulic landing gear works as it should. Heat in cab. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Serco 170 1993
$44,500
Propac 60" Slasher Table

Propac 60" Slasher Table

Propac 60" Slasher Table. Frame, saw, & motor is in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Propac 60" -
$10,500
Prentice 210D Self-Propelled Loader with 60" Siiro Slasher

Prentice 210D Self-Propelled Loader with 60" Siiro Slasher

Prentice 210D Self-Propelled Loader with 60" Siiro Slasher. Hour meter reads 16,482 hours. John Deere 6059T engine starts and runs good but will need a head gasket. 60" Siiro Slasher has a cracked blade and the ears that hold the motor will need to be welded. All the cylinders on the boom have been rebuilt. Heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Prentice 210D -
$17,500
Prentice 210D Loader with Adjustable Buck Saw

Prentice 210D Loader with Adjustable Buck Saw

1984 Prentice 210D Loader with Adjustable Buck Saw. This equipment has a rebuilt John Deere engine, runs and starts good, has paper work, strong hydraulics and cylinders, boom has a little play not bad, newer 360 grapple, carrier and down riggers in good working condition, heat, and lights. CTR adjustable buck saw has a 52" bar & butt plate. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Prentice 210D 1984
$18,500
Mack Truck with a Lemco 185 Loader & 60" Lemco Slasher

Mack Truck with a Lemco 185 Loader & 60" Lemco Slasher

1976 Mack Truck with a Lemco 185 Loader & 60" Lemco Slasher. This loader has a John Deere 6 cyl. engine, runs and starts good, Truck has a 300 engine, runs and starts good, loader has all new O-rings and seals, cylinders have all been redone, joy stick controls, tight boom and grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Mack - 1976
$26,500
Lemco XLT 185 Self Propelled Log Loader w/ 60" Slasher

Lemco XLT 185 Self Propelled Log Loader w/ 60" Slasher

1998 Lemco XLT 185 Self Propelled Log Loader with 60" Lemco Slasher. This equipment has a John Deere engine, runs and starts good, strong hydraulics and cylinders, all valve banks have been resealed, Sta-Lite self propelled carrier is in good working order, 60" Lemco slasher, straight blade, good teeth, tight boom and grapple, live heal, heat, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Lemco XLT 185 1998
$36,500
Lemco 2500 Series Log Loader with a Lemco 60" Slasher

Lemco 2500 Series Log Loader with a Lemco 60" Slasher

1992 Lemco 2500 Series Truck Mounted Log Loader with a Lemco 60" Slasher. This equipment has a John Deere engine, runs and starts good, strong hydraulics and cylinders, tight boom and grapple, live heal, 4 out riggers. Slasher has a straight blade, good teeth, butt board. Truck runs good, has decent tires and brakes. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Lemco 2500 1992
$29,500