Slasher/Loader For Sale
Photo |
Title
|
Make | Model | Year | Price |
Hood 24000 Self Propelled Log Loader with Propac Slasher2004 Hood 24000 Self Propelled Log Loader with Propac Slasher. John Deere 6068 engine starts and runs good. Loader is on a Hagan carrier, with a Rotobec loader and Propac slasher saw. 28000 swing bearing. 2 hydro boards, set up for 4', 8', and bunks to 16'-6". Will cut up to 24' logs. Pilot controls. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Hood | 24000 | 2004 |
$52,500
|
|
Tigercat 234B Loader w/CSI 264 Delimber & CSI Buck Saw2018 Tigercat 234B Loader with CSI 264 Delimber and CSI DL-4400 Bucksaw. Hour meter reads 4,395 hours. Loader is tight, 32' boom. CSI DL-4400 bucksaw has less than 300 hours on it, 264 delimber is in good working order. Trailer is in good condition, tires estimated at 30%. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Tigercat | 234B | 2018 |
$203,500
|
|
Prentice 210D Loader with Adjustable Buck Saw1984 Prentice 210D Loader with Adjustable Buck Saw. This equipment has a rebuilt John Deere engine, runs and starts good, has paper work, strong hydraulics and cylinders, boom has a little play not bad, newer 360 grapple, carrier and down riggers in good working condition, heat, and lights. CTR adjustable buck saw has a 52" bar & butt plate. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Prentice | 210D | 1984 |
$18,500
|
|
Prentice 210D Self-Propelled Loader with 60" Siiro SlasherPrentice 210D Self-Propelled Loader with 60" Siiro Slasher. Hour meter reads 16,482 hours. John Deere 6059T engine starts and runs good but will need a head gasket. 60" Siiro Slasher has a cracked blade and the ears that hold the motor will need to be welded. All the cylinders on the boom have been rebuilt. Heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Prentice | 210D | - |
$17,500
|
|
FORD 8000 with Prentice 210C and Siiro 60" SlasherPrentice 210C Mounted on a 1980 FORD 8000 Truck with a Siiro 60" Slasher. Hour meter reads 10,639 hours. CAT 3208, yard truck. Cummins 6BT in the loader. Lever controls, swing bearing and boom are tight, dead heel. Siiro 60" slasher has minimal welding, disk & teeth are good, bangboard has a crack that could be welded. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Prentice | 210C | Unknown |
$14,500
|
|
Serco 170A Loader with 60" Slasher2001 Serco 170A Loader with 60" Slasher. Hours meter reads 14,291 hours. John Deere engine. Boom is tight. 60" slasher included, blade and teeth are in good condition. Tires on the trailer are in good condition. Heat, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Serco | 170A | 2001 |
$39,500
|
|
Serco 170 Loader with Siiro 60" Slasher1993 Serco 170 Loader with Siiro 60" Slasher. John Deere engine starts and runs good. Loader sits on a 1979 Mack truck that works well. Loader is tight, has a brand new main lift cylinder. Blade is straight, new teeth. Hydraulic landing gear works as it should. Heat in cab. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Serco | 170 | 1993 |
$44,500
|
|
Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher1999 Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher. This equipment has an estimated 17,000 hours, 60" Siirro slasher table is in good working order. Rotobec grapple, Cummins 5.9 runs and starts good. Exhaust was just resealed, injectors were just resealed as well. Accumulator manifold was just resealed less then 200 hours ago. Pilot pump rebuilt 1,000 hours ago, right bank valve body rebuilt 1,500 hours ago. Swing pump rebuilt 1,500 hours ago, main pump was rebuilt 2,000 hours ago. Joystick controls. New LED lights. Heat. A/C is not working CB. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Barko | 160D | 1999 |
$44,500
|
|
Western Star Truck with Serco 125 Loader & Siiro ***SOLD***1981 Western Star Truck with a 1994 Serco 125 Loader and Siiro 60” slasher Saw. This equipment has good tires all around on truck and slasher, Detroit engine in the truck, runs and starts good, 6 cyl. John Deere power in the loader, few leaks but starts right up and runs out good. Plugin block heater, strong hydraulics and cylinders, boom and grapple have decent pins and bushings. Slasher has straight blade and good teeth. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Serco | 125 | 1994 |
$Call for Price
|
|
GMC General with Prentice 110 Loader1986 GMC General with Prentice 110 Loader. Cummins 400hp engine, 13 speed manual transmission. All new 11R22.5 tires. Prentice 110 loader is strong, has a little slack. Butt bucket. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Prentice | 110 | Unknown |
$11,000
|
|
Mack Truck with a Lemco 185 Loader & 60" Lemco Slasher1976 Mack Truck with a Lemco 185 Loader & 60" Lemco Slasher. This loader has a John Deere 6 cyl. engine, runs and starts good, Truck has a 300 engine, runs and starts good, loader has all new O-rings and seals, cylinders have all been redone, joy stick controls, tight boom and grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Mack | - | 1976 |
$26,500
|
|
International w/Prentice 180D & 60" Siiro Slasher ***SOLD***1980's International Load-Star Loader Truck with a 1990's Prentice 180D Loader and a 60" Siiro Slasher. This truck has a 671 Detroit engine, runs and starts good, 13 speed transmission. Prentice 180D Loader has a John Deere engine, runs and starts good, electric block heater. Joystick controls, tight boom and pins. Turn table is in good working order, newer swing motor, Barko 1/3 bypass bucket. Siiro Slasher has straight a blade and good teeth. Cab has heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Prentice | - | Unknown |
$Call for Price
|