1980's International Load-Star Loader Truck with a 1990's Prentice 180D Loader and a 60" Siiro Slasher. This truck has a 671 Detroit engine, runs and starts good, 13 speed transmission. Prentice 180D Loader has a John Deere engine, runs and starts good, electric block heater. Joystick controls, tight boom and pins. Turn table is in good working order, newer swing motor, Barko 1/3 bypass bucket. Siiro Slasher has straight a blade and good teeth. Cab has heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

1986 GMC General with Prentice 110 Loader. Cummins 400hp engine, 13 speed manual transmission. All new 11R22.5 tires. Prentice 110 loader is strong, has a little slack. Butt bucket. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

1999 Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher. This equipment has an estimated 17,000 hours, 60" Siirro slasher table is in good working order. Rotobec grapple, Cummins 5.9 runs and starts good. Exhaust was just resealed, injectors were just resealed as well. Accumulator manifold was just resealed less then 200 hours ago. Pilot pump rebuilt 1,000 hours ago, right bank valve body rebuilt 1,500 hours ago. Swing pump rebuilt 1,500 hours ago, main pump was rebuilt 2,000 hours ago. Joystick controls. New LED lights. Heat. A/C is not working CB. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2001 Serco 170A Loader with 60" Slasher. Hours meter reads 14,291 hours. John Deere engine. Boom is tight. 60" slasher included, blade and teeth are in good condition. Tires on the trailer are in good condition. Heat, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Prentice 210D Self-Propelled Loader with 60" Siiro Slasher. Hour meter reads 16,482 hours. John Deere 6059T engine starts and runs good but will need a head gasket. 60" Siiro Slasher has a cracked blade and the ears that hold the motor will need to be welded. All the cylinders on the boom have been rebuilt. Heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

2018 Tigercat 234B Loader with CSI 264 Delimber and CSI DL-4400 Bucksaw. Hour meter reads 4,395 hours. Loader is tight, 32' boom. CSI DL-4400 bucksaw has less than 300 hours on it, 264 delimber is in good working order. Trailer is in good condition, tires estimated at 30%. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.