Slasher/Loader For Sale

Featured in Slasher/Loader

NO FEATURED LISTINGS TO DISPLAY

Sort By:

Photo	Title	Make	Model	Year	Price
	GMC General with Prentice 110 Loader 1986 GMC General with Prentice 110 Loader. Cummins 400hp engine, 13 speed manual transmission. All new 11R22.5 tires. Prentice 110 loader is strong, has a little slack. Butt bucket. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Prentice	110	Unknown	$11,000
	Chevrolet C20 with 1979 Hood 12000 Loader & 52" Slasher 1987 Chevrolet C20 with 1979 Hood 12000 Loader & 52" Slasher. Odometer reads 38,000 original miles, originally a water tanker for a county. 13 speed with a 454 Detroit. 1979 Hood loader needs a new head gasket, currently leaking. Front window in loader could also be replaced along with batteries. 52" slasher is in good condition, has quick disconnects to the loader. Heat, radio, fan, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Hood	12000	1979	$10,000
	Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher 1999 Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher. This equipment has an estimated 17,000 hours, 60" Siirro slasher table is in good working order. Rotobec grapple, Cummins 5.9 runs and starts good. Exhaust was just resealed, injectors were just resealed as well. Accumulator manifold was just resealed less then 200 hours ago. Pilot pump rebuilt 1,000 hours ago, right bank valve body rebuilt 1,500 hours ago. Swing pump rebuilt 1,500 hours ago, main pump was rebuilt 2,000 hours ago. Joystick controls. New LED lights. Heat. A/C is not working CB. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Barko	160D	1999	$44,500
	International with Serco 170 & Siiro 60" Slasher 1987 International with 1992 Serco 170 & 60" Siiro Slasher. Big cam Cummins in the truck, odometer reads 593,740 miles. Eaton fuller transmission. Serco 170 has a newer John Deere 6068 engine with 3,500 hours, meter reads 8,800 hours. 500 hours on a newer pump. Loader needs a couple push rods in the motor. Siiro 60" slasher, blade has extra teeth and rivets. Slasher table motor needs a new seal. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Serco	170	1992	$14,500
	Serco 170 Loader with Siiro 60" Slasher 1993 Serco 170 Loader with Siiro 60" Slasher. John Deere engine starts and runs good. Loader sits on a 1979 Mack truck that works well. Loader is tight, has a brand new main lift cylinder. Blade is straight, new teeth. Hydraulic landing gear works as it should. Heat in cab. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Serco	170	1993	$44,500
	Serco 170A Loader with Siiro 60" Slasher 2005 Serco 170A Loader with Siiro 60" Slasher. Hour meter reads 10,928 hours. John Deere 6068 engine. Loader is tight & dry. Savage carrier. Good tires and all outriggers work. Dead heel. Rebuilt bucket. New batteries and Webasto preheater. New pins and bushings and repacked the main lift cylinder. Siiro 60" slasher, good blade & tires. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Serco	170A	2005	$56,000
	Serco 170A Loader with 60" Slasher 2001 Serco 170A Loader with 60" Slasher. Hours meter reads 14,291 hours. John Deere engine. Boom is tight. 60" slasher included, blade and teeth are in good condition. Tires on the trailer are in good condition. Heat, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Serco	170A	2001	$39,500
	FORD 8000 with Prentice 210C and Siiro 60" Slasher Prentice 210C Mounted on a 1980 FORD 8000 Truck with a Siiro 60" Slasher. Hour meter reads 10,639 hours. CAT 3208, yard truck. Cummins 6BT in the loader. Lever controls, swing bearing and boom are tight, dead heel. Siiro 60" slasher has minimal welding, disk & teeth are good, bangboard has a crack that could be welded. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Prentice	210C	Unknown	$11,500
	Prentice 210D Log Loader with 60" Slasher 1994 Prentice 210D Log Loader with 60" Slasher. Hour meter reads 24,000 hours. John Deere engine starts and runs good. RAP 42" grapple. 60" CTR slasher with 14' table. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Prentice	210D	1994	$26,500
	Prentice 210D Self-Propelled Loader with 60" Siiro Slasher Prentice 210D Self-Propelled Loader with 60" Siiro Slasher. Hour meter reads 16,482 hours. John Deere 6059T engine starts and runs good but will need a head gasket. 60" Siiro Slasher has a cracked blade and the ears that hold the motor will need to be welded. All the cylinders on the boom have been rebuilt. Heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Prentice	210D	-	$12,500
	Tigercat 234B Loader w/CSI 264 Delimber & CSI Buck Saw 2018 Tigercat 234B Loader with CSI 264 Delimber and CSI DL-4400 Bucksaw. Hour meter reads 4,395 hours. Loader is tight, 32' boom. CSI DL-4400 bucksaw has less than 300 hours on it, 264 delimber is in good working order. Trailer is in good condition, tires estimated at 30%. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Tigercat	234B	2018	$203,500
	Hood 24000 Self-Propelled Loader with Hood 60" Slasher 1999 Hood 24000 Self-Propelled Loader. John Deere 6068T engine is newer, with 1,400 hours. Hour meter reads 14,000 hours. 28Lx26 tires estimated at 80%, Double diamond ice chains, estimated at 50%. 60" Hood slasher table, with new Rexroth saw motor. Rotobec 6606 grapple. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.	Hood	24000	1999	$35,000