Sort By:   GridGallery
Photo Title
Make Model Year Price
Serco 270 Loader ***SOLD***

Serco 270 Loader ***SOLD***

2003 Serco 270 Loader on Ford 9000 with a 60" Hanfab Slasher. This unit has a John Deere 6068 engine, runs and starts good, has been rebuilt, new stick cylinder and main lift cylinder, tight 35' boom, live heel, Rotobec grapple, slasher has square frame, in good working order well maintained, used daily. Stripper Delimber on Trailer, little use. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Serco 270 2003
$Call for Price
CAT 529 Knuckleboom Loader w/ CSI DL4400 Buck Saw

CAT 529 Knuckleboom Loader w/ CSI DL4400 Buck Saw

2015 CAT 529 Knuckleboom Loader with a 2016 CSI DL4400 Buck Saw. Hour meter reads 5,090 hours, runs and starts good, strong hydraulics and cylinders, tight boom and grapple, pilot controls are in good working order. Heat, A/C, radio, and lights. Carrier has good brake and tires. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

CAT 529 2015
$Call for Price
2000 TIMRICK 2750 Slasher Loader

2000 TIMRICK 2750 Slasher Loader

Call for pricing. 6068 engine has only 7,500hrs. Call for complete work order info ($80,000 work order completed 647hrs ago): All Booms re-pinned/bushed. Align-boring done where required. All Hydraulics Rebuilt. New Hoses. All Cylinders Rebuilt. Swing Boxes Rebuilt... Too much to fully list!

Timrick 2750 2000
$Call for Price
Hood 24000 Mini Mobile Self Propelled Loader Slasher *SOLD*

Hood 24000 Mini Mobile Self Propelled Loader Slasher *SOLD*

1996 Hood 24000 Mini Mobile Self Propelled Loader Slasher. According to owner, this loader has a John Deere 6 cyl. engine rebuilt 2 years ago. Cylinders & pumps, drive couplings, alternator, boom bushings recently rebuilt as well according to owner. New saw motor and saw blade. Pilot controls on machine. Self propelled carrier in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Hood 24000 1996
$Call for Price
ProPac 60" Slasher with a Flip up Measuring Table

ProPac 60" Slasher with a Flip up Measuring Table

ProPac 60" Slasher with a Flip up Measuring Table. This equipment will need a few welds, has strong hydraulics and cylinder. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Pro-pac 60" -
$7,500
Barko 160A Loader on a Mack Truck w/Sirro 60" Slasher *SOLD*

Barko 160A Loader on a Mack Truck w/Sirro 60" Slasher *SOLD*

1993 Barko 160A Loader on a Mack Truck with Sirro 60" Slasher. This equipment has a Cummins 5.9 engine that will need attention. Mack truck, Sirro 60" in working order. Contact Erik @ Red Pine Equipment 218-720-0933. Located in Northcentral USA. ***SOLD***

Barko 160A 1993
$8,000
CTR 60" Slasher

CTR 60" Slasher

CTR 60" Slasher with Adjustable Butt Board and Delimber Knife. This equipment has an adjustable butt board, delimber knife, straight blade, good teeth, strong hydraulics and cylinders, good hoses, decent tires, pintle hitch, solid frame. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

CTR 60" Unknown
$10,500
GMC Loader Truck with Hood Loader and Slasher

GMC Loader Truck with Hood Loader and Slasher

1988 GMC Loader Truck with Hood Loader and Slasher. This truck has a newer CAT 3408 engine, runs and starts good, 13 speed Fuller transmission, good brakes and tries, Loader has a Detroit 4 cyl. engine, runs and starts good, new hydraulics pump, lever controls, decent pins and bushings on boom and grapple, 52" carbide blade. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

GMC - 1988
$12,900
Truck Mounted Serco 800 loader with Slasher Saw ***SOLD***

Truck Mounted Serco 800 loader with Slasher Saw ***SOLD***

Serco 8000 Loader on a 1979 Ford 9000 Truck with a 60" Hood Slasher Saw. According to owner, truck has a 671 Detroit that runs well with a 4x4 manual transmission. Serco 8000 loader with heat, windshield is cracked. Nice tight machine with a few minor hydraulic leaks. 4 cylinder John Deere power plant for loader, runs and starts good, new hydraulic pump, fresh fuel filters and oil change. 60" Hood slasher with adjustable back stop - 100" to 124" bunk in good shape, some cracks on slasher have been welded. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ral USA. ***SOLD***

Serco 8000 Unknown
$15,000
Prentice 210D Loader with Adjustable Buck Saw

Prentice 210D Loader with Adjustable Buck Saw

1984 Prentice 210D Loader with Adjustable Buck Saw. This equipment has a rebuilt John Deere engine, runs and starts good, has paper work, strong hydraulics and cylinders, boom has a little play not bad, newer 360 grapple, carrier and down riggers in good working condition, heat, and lights. CTR adjustable buck saw has a 52" bar & butt plate. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Prentice 210D 1984
$18,500
Hanfab 72" Pull Behind Slasher

Hanfab 72" Pull Behind Slasher

Hanfab 72" Pull Behind Slasher. This equipment has a straight blade, good teeth with a few extras, solid frame, butt board is in good order. Good tires, pintle hitch. Contact Erik @ Red Pine Equipment 218-720-0933. Slasher is located in Northcentral USA.

Hanfab 72 Unknown
$18,500
Ford 800 Truck with Prentice 180D Loader & Lemco Slasher

Ford 800 Truck with Prentice 180D Loader & Lemco Slasher

1972 Ford 800 Truck with a 1993 Prentice 180D Loader with a 1989 Lemco 60" Slasher. This machine has a John Deere 6068T engine, runs and starts good, strong hydraulics and cylinders, tight joystick controls, solid frame, swing gear is in good order, tight boom and grapple. Straight blade good teeth, heat, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ford 800 1972
$20,500