Sort By:   GridGallery
Photo Title
Make Model Year Price
Go-Tract Skidder

Go-Tract Skidder

70's Go-Tract Skidder with a 453 Detroit. Owner stated that this machine has a cracked head, 40" tracks, needs rubber belting and bogie tires, extra parts, Funk transmission, gearmatic winch. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Go-Tract - -
$Call for Price
Tigercat 630B Dual Arch Grapple Skidder

Tigercat 630B Dual Arch Grapple Skidder

Tigercat 630B Dual Arch Grapple Skidder. Owner stated that this skidder has 8,537 hours, runs and starts good, tight pins and bushings, strong hydraulics, 35.5x32 tires, rears 50%, fronts 35% with chains, has a 748 bunching grapple, heat, and A/C. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA.

Tigercat 630B -
$Call for Price
KMC 1600H Swing Grapple Track Skidder

KMC 1600H Swing Grapple Track Skidder

KMC 1600H Hydrostatic Swing Grapple Track Skidder. Owner said that this unit has a newly rebuilt Cummins Model 6BTA 174 HP Diesel Engine with 0 hours. All components minus the block were purchased new from Cummins - injectors, turbo, starter, etc. New batteries and battery cables. 2,800 frame hours showing on meter. Owner stated this unit was reconditioned by KMC around 200 hours ago, track system is in very good shape. Hydraulic pump for left side track was just rebuilt. Very nice machine, must see. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southwest USA.

KMC 1600H -
$235,000
John Deere 440 Skidder

John Deere 440 Skidder

John Deere 440 Skidder. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 440 -
$24,500
John Deere 648D Skidder with Winch

John Deere 648D Skidder with Winch

John Deere 648D Grapple Skidder with Winch. Grapple works. Center pins are worn but not warn out. Has hydraulic leak that is being fixed. 30.5x32 tires, nice machine. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 648D -
$18,500
Timberjack 230A Skidder

Timberjack 230A Skidder

Timberjack 230A Skidder. This machine has a Cummins motor, good winch. Contact Erik @ Red Pine Equipment. Machine is located in Northeast USA.

Timberjack 230A -
$27,900
John Deere 440 Cable Skidder

John Deere 440 Cable Skidder

EARLY 70'S JOHN DEERE 440 CABLE SKIDDER 4 CYL DEERE POWERSHIFT 18.4-26 RUBBER REBUILT PUMP NEW CENTER

John Deere 440 -
$19,500
John Deere 648GIII Skidder

John Deere 648GIII Skidder

2003 John Deere 648GIII Dual Arch Grapple Skidder. This skidder runs and starts good has been well maintained, Sweda axles, rear axle was rebuilt. Direct Drive, tight center section, strong hydraulics and cylinders, New 30.5x 32 tires with dual rims, heat, A/C, and LED lights. Duals are available for additional cost. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 648GIII -
$61,500
John Deere 440C Log Skidder

John Deere 440C Log Skidder

John Deere 440C Log Skidder. Dry, tight machine, winch works good, hour meter reads 3,300 hours. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 440C -
$28,500
Timberjack 230A Skidder

Timberjack 230A Skidder

Timberjack 230A Skidder, This machine has a Cummins 4BT, 4 speed manual transmission, good running skidder. 18.4-26 Tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Timberjack 230 -
$23,500
2 Clark Ranger 666D Skidders

2 Clark Ranger 666D Skidders

2 Clark Ranger 666D Skidders - One of these machines was working until recently and the other one is a parts machine & is missing the transmission & a few other parts. In the pictures, the parts machine is the one with only 2 tires on it, it's missing the rear tires/wheels. Notice the working machine has a very bad blade, but the one on the parts machine could be switched to the running machine, but it will also need some welding to get it in good shape. Both have 5.9 Cummins, but the parts machine engine will need some work. Both machines have winches & grapples. Parts machine includes: 5.9 Cummins that needs work Radiator with grill/guard Clark winch Front & rear axles 2 good 23.1x26 tires w/ rims Blade Hydraulic cylinders Log arch with rollers Muffler guard on top of cab Belly pan guards & engine side panels Valves Driveshaft(s) Hoses Cradle assembly Sweeps (bars from front of hood to top of cab) $28,500 for both machines The complete machine and the parts from the parts machine should fit in a 40' container. Both machines are currently located near the port of Savannah Georgia at a facility that can dismantle & containerize them. We estimate $9,000 for dismantling & containerizing both machines, including ocean freight to Paramaribo Suriname or Georgetown Guyana, so approximate total cost including delivery would be $40,000. Contact Kelly @ Red Pine Equipment 218-720-0933. ***REDUCED FROM $31,000.00***

Clark Ranger 666D -
$28,500
Tree Farmer C4 Cable Skidder ***SOLD***

Tree Farmer C4 Cable Skidder ***SOLD***

1970 Tree Farmer C4 Cable Skidder. This machine has a 242 Ford Industrial engine, runs and starts good, Gearmatic winch, center section is in decent condition, 18.4-26 tires @ 50%, transmission is in good working order, strong hydraulics and cylinders, few minor leaks. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Tree Farmer C4 1970
$10,500