Ponsse Ergo Harvesters/Processors For Sale

2016 Ponsse Ergo 8 Wheeled Harvester with Ponsse H8 Harvesting Head. Hour meter reads 13,000 hours. Went through the Ponsse Refurb program less than 1,000 hours ago. 710/45-26.5 tires are estimated at 60%, includes tracks that are estimated at 80%. New head pump, drive coupler, exhaust, windows, feed wheel arms, feed wheels, knives, tilt cylinder, & main lift cylinder. Valve banks were also resealed. Owner operator. Webasto preheat system, heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

2008 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes engine, runs and starts good, strong hydraulics and cylinders, new conical pins in the crane base and upper and lower in the pillar. 6/20/18 all new pressure hoses, case drain hose and steal lines inside the boom. All new inner and outer swing gear bolts. bogies are in good order. Computer was just cleaned out at Ponsse. 710 tires are good with 1 set of tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

2010 Ponsse Ergo with H7 Harvesting Head. Hour meter reads 19,789 hours. Mercedes Benz engine. 710/55R34 tires on the front are estimated at 70%, 710/45-26.5 tires on the rear are estimated at 40%, includes a set of tracks that are estimated at 85%. Head pump was done. Fiber clutch and pumps were done at 14,500 hours. H7 harvesting head has new knives and bushings. Webasto preheater. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2010 Ponsse Ergo with 2015 Ponsse H7 Processing Head. Hour meter reads 23,257 hours. Mercedes engine starts and runs good. 710/55R34 tires on the front are estimated at 70%, 710/45-26.5 tires on the rear are estimated at 50%, includes a set of like new tracks at 90%. Webasto preheat and auto-grease systems. C4 crane. 2015 Ponsse H7 processing head that has been completely rebuilt besides the valving. Ponsse went through the machine in 2022. New swing motor, lift cylinders, pins, bushings, rotator, & hoses. Updated center section with frame lock cylinders. Heat, A/C, radio, comfort grip control and updated computer. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2014 Ponsse Ergo 8 Wheeled Processor with 2020 H7 Head. Hour meter reads 12,180 hours. Mercedes Benz OM 926 engine. 710 tires are estimated at 80%. One set of tracks can be included for additional cost. Fire suppression system, C4 crane, strong hydraulics and cylinders. Webasto preheat system. Very well maintained and tight. 2020 Ponsse H7 head has been used for one season, it's in great condition. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2015 Ponsse 8W Ergo with 2020 H7 Processing Head. Hour meter reads 12,269 hours. Mercedes engine. Trelleborg 710/45-26.5 tires are estimated at 90%. Inner boom hoses have just been replaced. Webasto preheat system. C5 crane, double squirt boom. 2020 Ponsse H7 processing head, good feed wheels, measuring system is in working order. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD***