Ponsse Harvesters/Processors For Sale

2010 Ponsse Ergo with 2015 Ponsse H7 Processing Head. Hour meter reads 23,257 hours. Mercedes engine starts and runs good. 710/55R34 tires on the front are estimated at 70%, 710/45-26.5 tires on the rear are estimated at 50%, includes a set of like new tracks at 90%. Webasto preheat and auto-grease systems. C4 crane. 2015 Ponsse H7 processing head that has been completely rebuilt besides the valving. Ponsse went through the machine in 2022. New swing motor, lift cylinders, pins, bushings, rotator, & hoses. Updated center section with frame lock cylinders. Heat, A/C, radio, comfort grip control and updated computer. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2014 Ponsse Ergo 8 Wheeled Processor with 2020 H7 Head. Hour meter reads 12,180 hours. Mercedes Benz OM 926 engine. 710 tires are estimated at 80%. One set of tracks can be included for additional cost. Fire suppression system, C4 crane, strong hydraulics and cylinders. Webasto preheat system. Very well maintained and tight. 2020 Ponsse H7 head has been used for one season, it's in great condition. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2015 Ponsse 8W Ergo with 2020 H7 Processing Head. Hour meter reads 12,269 hours. Mercedes engine. Trelleborg 710/45-26.5 tires are estimated at 90%. Inner boom hoses have just been replaced. Webasto preheat system. C5 crane, double squirt boom. 2020 Ponsse H7 processing head, good feed wheels, measuring system is in working order. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD***

2009 Ponsse Ergo 6 Wheeled Processor with 2013 H7 Processing Head. Hour meter reads 18,125 hours. Mercedes Benz 6cyl engine starts and runs good. Preheat system, strong hydraulics and cylinders, bogies are in good working order, tight boom, squirt boom works as it should, solid boom base. Pumps are all in good working order, tight center. C4 crane, H7 head, and measuring system are in good working order. 710 tires estimated at 60% with tracks. Auto fire extinguisher. Side window wipers. Owner operated. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218 -720-0933. Equipment is located in Northcentral USA.

1998 Ponsse Cobra HS10 Harvester with a Ponsse H53 Head. This equipment has a Perkins 6 cylinder engine, runs and starts good, 6,500 hours on engine, new flex plate. Center cone bearing was recently redone, tight boom and grapple, double squirt boom extension in good working order, strong hydraulics and cylinders, tight bogies, few minor leaks. Ponsse 1000 computer, head is in working condition, may need a few pins and bushings. 700-45 x 22.5 tires @ 50%. Heat & lights. A/C will need some attention. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

2002 Ponsse Ergo with Ponsse H73 Processing Head. Engine runs well. Machine has several cylinders, hoses and fittings leaking. 700/55-34 and 700/50-26.5 tires @ 30%. HN 125 Crane. Sheet metal fairly straight. Pins and bushings in decent condition. Machine is working and cutting wood. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.