Sort By:   GridGallery
Photo Title
Make Model Year Price
2018 Cord King M20-30 w/24’ Timberwolf Conveyor

2018 Cord King M20-30 w/24’ Timberwolf Conveyor

2018 Cord King M20-30 w/24’ Timberwolf Conveyor and many upgrades. Powered by a 50 hp CAT turbo diesel engine with only 390.5 hours of use. Enclosed operator’s cab has heat, an electric fan, and a 2000W power converter. There are 4 exterior LED light bars. 1 mounted on each side of the operator’s cab providing a safe well lit work area even after the sun goes down. A 3 strand hydraulic loading platform, over sized hydraulic tank, auxiliary hydraulic ports, an upgraded mount for the exhaust, and a toolbox with a door that locks for plenty of secure storage. Comes with a 6 way wedge and an 8 way wedge. Equipped with trailer lights and electric brakes. 24’ Timberwolf Conveyor can be powered via the auxiliary hydraulic ports of the processor or used independently powered by its own Honda GX-160 gas engine. Has an upgraded paddle belt (1” raised cleats) and a custom made vinyl cover which keeps the belt clear of snow and ice in the winter moths.

Cord King M20-30 2018
$54,500
Cord King Model 60 Firewood Processor ***SOLD***

Cord King Model 60 Firewood Processor ***SOLD***

2019 Cord King Model 60 Firewood Processor. Less than 30 Hours!!! 125 HP engine, starts & runs good. Strong hydraulics, 60” slasher saw, 20’ infeed with 4 leg live deck. Hydraulic stop adjustable 12-24”. Full operator cage with deluxe seat. Automatic clamping, 50 gallon fuel tank. 140 gallon hydraulic reservoir. Hydraulic oil cooler. Tandem axle with pintle hitch, a hydraulic adjustable wedge. Hydraulic folding log deck. Dual drive log deck. Heated cab. 24’ offload conveyor. Trap doors. Quick split auto split trigger. Fast retract. 8 way and 16 way wedges. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. ***SOLD***

Cord King Model 60 2019
$140,500
HAHN HFP-150 Skid Steer Firewood Processor

HAHN HFP-150 Skid Steer Firewood Processor

Hahn HFP-150 Skid Steer Firewood Processor with very little use. Owner was going into firewood business but never started the business. Includes hydraulic raise/lower 4-way splitting wedge & controls to install in your skid steer. Less than 10 cords run through it, paint isn't even worn off yet. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Hahn HFP-150 Unknown
$18,900
Multitek 2020SS Firewood Processor with Conveyor  ***SOLD***

Multitek 2020SS Firewood Processor with Conveyor ***SOLD***

2019 Multitek 2020SS with a FWC-20 Conveyor. Machine has only 450 hours on a Kohler Diesel engine, engine is in good condition. 4 strand live deck. Joystick controls. Cab has heat, AC, stereo, & air suspension seat. 8 way wedge. Takes up to a 22'-23" log. Splitter is rated for 4.5 second cycle time and has a 30 ton ram. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northwest USA. ***SOLD***

Multitek 2020SS 2019
$Call for Price
DYNA Firewood Tumbler ***SOLD***

DYNA Firewood Tumbler ***SOLD***

DYNA Firewood Tumbler. This tumbler is stationary with a swiveling wood chute. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA. ***SOLD***

DYNA - Unknown
$Call for Price
2015 Cord King 2030 Firewood Processor ***SOLD***

2015 Cord King 2030 Firewood Processor ***SOLD***

2015 Cord King 2030 Firewood Processor with Conveyor. Hour meter reads 1,969 hours. 80 HP CAT diesel power, engine runs and starts good. 44" saw with 20" cut, 20' Infeed table. Hydraulic oil cooler and log stop. Hydraulic 4 leg log deck with extended deck, 34 ton splitter, 8 and 6 way splitting wedges. Operators safety cage. 16' integrated offloading conveyor. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD***

Cord King 20-30 2015
$67,900
Blockbuster 22-20 Firewood Processor ***SOLD***

Blockbuster 22-20 Firewood Processor ***SOLD***

2012 Blockbuster 22-20 Firewood Processor with a 30' Radial Stacking Conveyor. 1 owner machine, hour meter reads 730 hours, 68 HP Kubota runs and starts good. Heavy duty 5" ram, 8' live deck, operators seat, operators lights (plumbed but not setup), operator’s roof, electric brakes, running lights, and unit has auto stop feature. Splitter cycle time 5 seconds. Hydraulic tank capacity (33 gal.), fuel tank capacity (25 gal.), 30' radial stacking conveyor. 4, 6, and 8 way wedges, 30" harvester bar. Lots of extra parts (Chains, Bars Solenoids, Valves, Sprockets) Unit will be serviced prior to shipping. Transport dimensions are 25'6" long, 8' wide, 8' 4" tall and approx. 8000 LBS. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northwest USA. ***SOLD***

Blockbuster 22-20 2012
$55,900
Bell's 6000 Firewood Processor ***SOLD***

Bell's 6000 Firewood Processor ***SOLD***

2013 Bell's 6000 Firewood Processor. Hour meter reads 4,200 hours. Runs and starts good. Well Maintained machine, has a fixed 16 way splitter. Push cylinder on splitter has been rebuilt. Owner says the unit is working daily and has been a very dependable machine, only selling to replace with a new one. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Southeast USA. ***SOLD***

Bell 6000 2013
$59,500
HAHN HFP-150 Skid Steer Firewood Processor ***SOLD***

HAHN HFP-150 Skid Steer Firewood Processor ***SOLD***

2014 HAHN HFP-150 Skid Steer Firewood Processor. This processor has a hydraulically adjustable 6 way wedge, strong hydraulics and saw motor. All hoses and cylinders are in good working order. Extra bars and chains. Was just serviced and ready to go. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Hahn HFP-150 2014
$16,500
Hahn HFP 160 Firewood Processor  ***SOLD***

Hahn HFP 160 Firewood Processor ***SOLD***

2009 HAHN HFP 160 Firewood Processor Skid Steer Attachment. Processor is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Hahn HFP-160 2009
$28,500
DYNA SC-16 Firewood Processor

DYNA SC-16 Firewood Processor

2015 DYNA SC-16 Firewood Processor. Hour meter reads 664 hours, Kubota engine, runs great. Hydraulic log lift, lights, 4 & 6 way wedges. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.

DYNA SC-16 2015
$42,500
Cord King Model 60 Firewood Processor ***SOLD***

Cord King Model 60 Firewood Processor ***SOLD***

2019 Cord King Model 60 Firewood Processor. Hour meter reads 696.7 hours, 125 HP engine, starts & runs good. 8 way and 16 way wedges. Strong hydraulics, 60” slasher saw, 20’ infeed with 4 leg live deck. Hydraulic stop adjustable 12-24”. Full operator cage with deluxe seat. Automatic clamping, 50 gallon fuel tank. 140 gallon hydraulic reservoir. Hydraulic oil cooler. Tandem axle with pintle hitch. Two wedges, a hydraulic adjustable wedge. Hydraulic folding log deck. Dual drive log deck. Heated cab. 16’ offload conveyor. Trap doors. Quick split auto split trigger. Fast retract. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. ***SOLD***

Cord King Model 60 2019
$139,500