Sort By:   GridGallery
Photo Title
Make Model Year Price
Hood 20000 6x6 Self Propelled Loader with Slasher

Hood 20000 6x6 Self Propelled Loader with Slasher

1998 Hood 20000 6x6 Self Propelled Loader with Slasher. This equipment has a 6068 John Deere engine, runs and starts good, strong hydraulics, tight boom and continuous grapple, live heel, 13,000 hours. 60" Hood saw. Folding/sliding butt board, carrier is in good order but does need brakes, heat, A/C, block heater, and quick couplers. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Hood 20000 1998
$29,500
Lemco 15000 Self Propelled Loader  ***SOLD***

Lemco 15000 Self Propelled Loader ***SOLD***

1994 Lemco 15000 Self Propelled Loader with a Lemco Model 6000H 60" Slasher. This loader has a live heel and has been very well maintained. Continuous turn bucket. New swing motor 1,000 hours ago and pumps have been gone through. Hour meter is not working but John Deere 6059T engine is estimated to have approximately 4,500 hours on it. Recent oil and filter change. This machine is very clean for it's age and shows very few signs of wear. No major welding, cracks or leaks found. Engine is dry and does not use any oil. Slasher saw works well and has hydraulic butt plate, new teeth and negative kerf set. Self propelled carrier works well. Pins and bushings are in good shape for age, minor play in main to jib boom bushing. Swing gear is in good condition. Joystick controls, very good seat and clean cab. All functions operate as they should. Heat, no A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Lemco 15000 1994
$25,000
Hood S-182 Self Propelled 6x6 Loader with 60" Hood Slasher

Hood S-182 Self Propelled 6x6 Loader with 60" Hood Slasher

2009 Hood S-182 Self Propelled 6x6 Loader with 60" Hood Slasher. This loader has around 7,000 hours, runs and starts good, Pro heat, John Deere engine runs and starts good. Strong hydraulics and cylinders, main boom cylinder has been repacked, drive system is in good working order, pilot controls, 360 bypass grapple. 2005 Hood 60" Slasher with low hours around 200, new blade, solid frame no cracks or welds. Heavy duty tires, heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hood S-182 2009
$92,500
Hood S182 Loader on a 6x6 Truck with a Siirro 60" Slasher

Hood S182 Loader on a 6x6 Truck with a Siirro 60" Slasher

1985 Hood S182 Loader on a 6x6 Truck with a Siiro 60" Slasher. This loader has a Deutz 6 cyl. engine, runs and starts good, strong hydraulics and cylinders, has a few hydraulic leaks, lever control, boom has been repinned. 1/3 cord bypass bucket, live heel, loader has heat but no A/C. Truck has a Cummins 8.3 engine, runs and starts good, 6,500 miles on odometer, Allison automatic transmission, front mounted winch. Siiro 60" slasher with butt plate, blade is straight but may need a few teeth. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Hood S182 1985
$26,500
2000 TIMRICK 2750 Slasher Loader

2000 TIMRICK 2750 Slasher Loader

Call for pricing. 6068 engine has only 7,500hrs. Call for complete work order info ($80,000 work order completed 647hrs ago): All Booms re-pinned/bushed. Align-boring done where required. All Hydraulics Rebuilt. New Hoses. All Cylinders Rebuilt. Swing Boxes Rebuilt... Too much to fully list!

Timrick 2750 2000
$Call for Price
Hood 24000 Self Propelled Loader Slasher ***SOLD***

Hood 24000 Self Propelled Loader Slasher ***SOLD***

1991 Hood 24000 Self Propelled Loader Slasher. This equipment has a 6068 John Deere engine, 28L tires, 21,000 hours, hydraulic measuring table 8’-16’ But can cut up to 21’, live heel, Rotobec grapple, runs great but has some leaks. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Hood 24000 1991
$27,500
GMC Loader Truck with Hood Loader and Slasher

GMC Loader Truck with Hood Loader and Slasher

1988 GMC Loader Truck with Hood Loader and Slasher. This truck has a newer CAT 3408 engine, runs and starts good, 13 speed Fuller transmission, good brakes and tries, Loader has a Detroit 4 cyl. engine, runs and starts good, new hydraulics pump, lever controls, decent pins and bushings on boom and grapple, 52" carbide blade. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

GMC - 1988
$12,900
Prentice 180D Loader on Mack Truck with Lemco 60" Slasher

Prentice 180D Loader on Mack Truck with Lemco 60" Slasher

1992-93 Prentice 180D Loader Mounted on a Mack Truck with a 60" Lemco Slasher. This equipment has a John Deere 6059T engine, starts & runs good, hour meter reads 11,530 hours, new main hydraulic pump on the loader, newer bigger grapple. This loader has been a very reliable, 60" Lemco slasher in good working order, Mack runs and starts good has a 5x4 transmission, new front differential, good brakes and tires, loader has heat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Prentice 180D 1992
$22,500
ProPac 60" Slasher with a Flip up Measuring Table

ProPac 60" Slasher with a Flip up Measuring Table

ProPac 60" Slasher with a Flip up Measuring Table. This equipment will need a few welds, has strong hydraulics and cylinder. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Pro-pac 60" -
$7,500
Caterpillar 559 Loader Slasher and Delimber ***SOLD***

Caterpillar 559 Loader Slasher and Delimber ***SOLD***

2013 Caterpillar 559 Loader Slasher and Delimber TMS Package. This equipment has 7,700 hours. Big John carrier, Rotobec 5052 grapple, Propac 500 ground slasher, CSI 264 delimber. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

CAT 559 2013
$150,000
Prentice 410EX Loader with CTR Delimber and Ground Saw

Prentice 410EX Loader with CTR Delimber and Ground Saw

2002 Prentice 410EX Loader with CTR Delimber and Ground Saw. This equipment has a newer 6 cyl. John Deere engine, runs and starts good, strong hydraulics and cylinders, tight pilot controls, 360 grapple, CTR delimber and topping saw are in good working order, ground saw has a good bar and chain, tight boom, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Prentice 410EX 2002
$42,500
Serco 125 Self Propelled Loader with a Serco 60" Slasher

Serco 125 Self Propelled Loader with a Serco 60" Slasher

1989 Serco 125 Self Propelled Loader with a Serco 60" Slasher. This machine is powered by a John Deere 6 cylinder engine which runs and starts good. Drive system is in good order, strong hydraulics and cylinders, boom and grapple have been gone through. New paint, 2 stick lever controls, slasher disc is in good condition as are tires. Heat and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Serco 125 1989
$35,000