Harvesters/Processors For Sale

Sort By:

Photo	Title	Make	Model	Year	Price
	Ponsse Ergo with H7 Harvesting Head 2010 Ponsse Ergo with H7 Harvesting Head. Hour meter reads 19,789 hours. Mercedes Benz engine. 710/55R34 tires on the front are estimated at 70%, 710/45-26.5 tires on the rear are estimated at 40%, includes a set of tracks that are estimated at 85%. Head pump was done. Fiber clutch and pumps were done at 14,500 hours. H7 harvesting head has new knives and bushings. Webasto preheater. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2010	$167,500
	Kobelco 260 with SP761 Dangle Head Processor 2022 Kobelco 260 with SP761 Dangle Head Processor. Hour meter reads 436 hours. Yanmar 194hp Tier 4f engine. 32" triple grouser pads, undercarriage is estimated at 95%. 2022 SP761 dangle head, 28" capacity. Feed wheels & knives are in good condition, no welding, measuring system is in working order. Warranty, owner operator. Forestry package. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA.	Kobelco	260	2022	$385,000
	CAT 501HD with Fabtek 2 Roller Processing Head 2013 CAT 501HD with Fabtek 2 Roller Processing Head. Engine hour meter reads 14,658 hours, machine hour meter reads 11,630 hours. CAT 6cyl engine. 24" double grouser pads, undercarriage is estimated at 85%. Cleanfix reversible fan. Jet fit bar system. Proheat preheat system. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	CAT	501HD	2013	$155,000
	Fabtek 133 with Fabtek 4 Roller Processing Head 2005 Fabtek 133 with Fabtek 4 Roller Processing Head. Hour meter reads 18,979 hours, crane hours read 8,635 hours. John Deere 6068 engine. 24" double grouse pads, undercarriage is estimated at 90%. Proheat preheat system. FT18 processing head has good feed wheels, minimal welding, & working measuring system. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Fabtek	133	2005	$90,000
	Ponsse Scorpion King with H7 Harvesting Head 2014 Ponsse Scorpion King with H7 Harvesting Head. Hour meter reads 13,641 hours. Mercedes Benz OM936 engine. Trelleborg 710/45-26.5 LS 2 tires are estimated at 70%. Includes a set of tracks that are estimated at 80%. Crane and center section are tight. Ponsse H7 harvesting head is in good condition, measuring system is in working order. Fire Suppression, Webasto Preheat, & Stump Spray systems. Heat, A/C, lights, radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Scorpion King	2014	$277,500
	Ponsse Ergo with H8 Harvesting Head 2022 Ponsse Ergo with H8 Harvesting Head. Hour meter reads 1,225 hours. Mercedes OM 936 Stage V/Tier 4F engine. 710/45-26.5 tires are estimated at 90%, tracks can be included. C44+ crane with an H8 harvesting head. Center and crane are tight. Webasto preheat system. Active Frame. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2022	$675,000
	Ponsse Ergo with Ponsse H7 Processing Head 2010 Ponsse Ergo with 2015 Ponsse H7 Processing Head. Hour meter reads 23,257 hours. Mercedes engine starts and runs good. 710/55R34 tires on the front are estimated at 70%, 710/45-26.5 tires on the rear are estimated at 50%, includes a set of like new tracks at 90%. Webasto preheat and auto-grease systems. C4 crane. 2015 Ponsse H7 processing head that has been completely rebuilt besides the valving. Ponsse went through the machine in 2022. New swing motor, lift cylinders, pins, bushings, rotator, & hoses. Updated center section with frame lock cylinders. Heat, A/C, radio, comfort grip control and updated computer. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2010	$150,000
	John Deere 690ELC Processor 1998 John Deere 690ELC Processor with a Waratah HTH 20 622 Head. This equipment was just gone through approximately 3,000 hours ago, engine, hydraulic pumps and undercarriage. This processor has 16,500 frame hours, tight boom, head is in good working condition, new computer, swing gear is in good condition, heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.	John Deere	690ELC	1998	$39,500
	Ponsse Ergo with H8 Processing Head *ON HOLD* 2023 Ponsse Ergo with H8 Processing Head. Hour meter reads 155 hours. Mercedes Benz OM 926 engine. 710/45-26.5 tires are estimated 95%. Includes two sets of tracks. Webasto preheat system. Ponsse C5 squirt boom. Ponsse H8 processing head is in great condition, measuring system in good working order. Heat, A/C, LED lights, lunch cooler & heater. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. *ON HOLD*	Ponsse	Ergo	2023	$669,500
	Timbco 425 EXL Processor with Log Max 6000 Head 2005 Timbco 425 EXL Processor with Log Max 6000 Head. Hour meter reads 23,250 hours. Cummins 8.3L engine is a reman. 24" single grouser pads, undercarriage is estimated at 10%, will need sprockets, rails, & rollers. Hydraulic pump and implement pumps have 3,000 hours on them. Measuring wheel was just rebuilt, computer is newer. Log Max 6000 processing head has good feed wheels and measuring system is in good working order. Needs a new rotator. Espar preheat system. Heat, A/C, lights, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Timbco	425 EXL	2005	$34,500
	John Deere 1270D with John Deere 758HD Processing Head 2006 John Deere 1270D with John Deere 758HD Processing Head. Hours are estimated at 10,000 hours. John Deere 6090 engine starts and runs good. 600 tires estimated at 70%. John Deere 758HD Processing Head is in good condition. Timbermatic computer system. Heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	John Deere	1270D	2006	$Call for Price
	Valmet 921 with 370E Processing Head 2001 Valmet 921 with 2005 370E Processing Head. Hours are unknown. Valmet 634 6cyl turbo diesel engine starts and runs good. 750 bogie tires are in good condition, estimated at 80%. Front tires are estimated at 25%. Cranab crane with a 2005 370E processing head, measuring system is in good working order. New cab main bearing 600 hours ago, new A/C compressor in 2022. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Valmet	921	2001	$34,900