Harvesters/Processors For Sale

Sort By:

Photo	Title	Make	Model	Year	Price
	John Deere 1270E with 2019 Waratah H270 *SOLD* 2015 John Deere 1270E with 2019 Waratah H270 Processing Head. Hour meter reads 11,000 hours. Waratah H270 Head has around 5,000 hours. Tracks on rear, estimated at 75%. H270 processing head is in good condition. Espar preheat system. Heat, A/C, radio, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. *SOLD*	John Deere	1270E	2015	$Call for Price
	2016 TN725C Timberpro This unit has all guards and glass in good shape, as well as the AC is nice and cold. It does have an Eberspacher pre heater in it and it has forward and reverse , Hi-Low Range. and Hydraulic brakes. The under carriage is at roughly 40% and has 23 3/4 " pads. We do take trades and we can assist with trucking and financing as well if needed. Thank you for looking!	-	-	2023	$129,500
	Ponsse Ergo with H8 Harvesting Head 2022 Ponsse Ergo with H8 Harvesting Head. Hour meter reads 1,615 hours. 710/45-26.5 tires are estimated at 90%. Set of tracks are like new. Active frame, C5 crane, with H8 harvesting head. Lunch heater/cooler and AutoMat. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2022	$675,000
	Ponsse Ergo Harvester with H7 Head 2008 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes engine, runs and starts good, strong hydraulics and cylinders, new conical pins in the crane base and upper and lower in the pillar. 6/20/18 all new pressure hoses, case drain hose and steal lines inside the boom. All new inner and outer swing gear bolts. bogies are in good order. Computer was just cleaned out at Ponsse. 710 tires are good with 1 set of tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Ponsse	Ergo	2008	$115,000
	Ponsse Ergo Harvester 2005 Ponsse Ergo Harvester. Hour meter reads 15,500 hours. This unit runs and starts good, has strong hydraulics, & tight pins and bushings. Tight boom, HN125 crane, head is in good working condition. Tires are at 60% with a set of bogie tracks, carriers are at 80%. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2005	$85,000
	HAHN 110 Self Propelled Harvester 1984 Hahn 110 Self Propelled Harvester. This machine has a Detroit 353 engine, runs and starts good, strong hydraulics and cylinders, strong pumps, drive system is in working order, tight boom and grapple, rollers, delimber and knives are in good order, strong brakes, heavy duty tires. Also has parts machine, extra orbit motor swing gear, engine and pumps, & boom. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Hahn	110	1984	$9,900
	Komatsu XT445L with Log Max 7000XT Processing Head 2022 Komatsu XT445L with Log Max 7000XT Processing Head. 24" single grouser pads, undercarriage is estimated at 90%. Warranty until November of 2024 or 5,000 hours. Komatsu care maintenance until November 2025 or 2,000 hours. Leveling system. Log Max 7000XT processing head is in good condition. Espar preheat system. Heat, A/C, radio, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Komatsu	XT445L	2022	$625,000
	CAT 501HD with Fabtek 4 Roller Processing Head 2016 CAT 501HD with Fabtek 4 Roller Processing Head. Hour meter reads 9,033 hours. 24" double grouser pads, undercarriage has less than 1,000 hours, estimated at 85%. Fabtek 4 Roller Processing head, Jet Fit bar system. New top knives, all new cylinders on the head. Proheat preheater. Heat, A/C, radio, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	CAT	501HD	2016	$219,500
	TimberPro 725C with a LogMax 7000XT Processing Head 2015 TimberPro 725C with 2018 LogMax 7000XT Processing Head. Hour meter reads 14,784 hours. 24" single grouser pads, undercarriage is estimated at 90%. 2018 LogMax 7000XT Processing Head has an estimated 5,000 hours. Machine can be sold with a 2018 processing head for $245,000 or a 2012 for $168,500. Espar preheat system. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.	Timberpro	725C	2015	$245,000
	John Deere 135G with HAHN 133 Processing Head 2013 John Deere 135G with HAHN 133 Processing Head. Hour meter reads 1,780 hours. 28" triple grouser pads, undercarriage is estimated at 80%. Hahn 133 processing head is in good condition. Rearview camera. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	John Deere	135G	2013	$157,500
	Timbco 415C Harvester with a Ponsse H73 Processing Head 1998 Timbco 415C Harvester with a 2006 Ponsse H73 Processing Head. Hour meter reads 8,900 hours. John Deere 6068T engine. 24" single grouser pads, undercarriage is estimated at 70%. Pins and bushings are good. Rebuilt hydraulic pump 400 hours ago. The 2006 Ponsse H73 Processing Head has an estimated 4,500 hours. Grab arms and feed rollers are in good working order. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Timbco	415C	1998	$47,500
	Ponsse Scorpion King Harvester 2020 Ponsse Scorpion King Harvester. 5,400 hours on hour meter. 10m C50 crane, H7 processing head, & 710-45x26.5" tires at 90%. Black Bruin RH3016 and double brake link, fixed back delimbing knives, thumbnail feed rollers, & saw box lights. This machine has three cameras (engine side and reverse), LED lights, radio, heat, A/C. Also has the fridge, food heater, & sunshades. This machine is ready for the woods. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Scorpion King	2020	$Call for Price