Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 2054 Harvester

John Deere 2054 Harvester

2004 John Deere 2054 Harvester with a Waratah 620B Head. This equipment has 14,500 frame hours. New motor has less than a 1,000 hours. Close to new approx. 95% rails, pads, front idlers, & sprockets. New hydraulic pumps 2,500 hours ago. New final drives 2,500 hours ago, rebuilt center joint 3,500 hours ago. All hydraulic hose and fittings are good. All boom cylinders are good. All controls work good, travel is good. The Waratah 620B head has same hours as machine, cylinders are all good, hydraulic hoses are all good, coupler fitting to boom at top of head is good, head rotate is good. Feed rollers are good, read outs good, 2 saws, Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northwest USA.

John Deere 2054 2004
$79,500
John Deere 690ELC Processor

John Deere 690ELC Processor

1998 John Deere 690ELC Processor with a Waratah HTH 20 622 Head. This equipment was just gone through approximately 3,000 hours ago, engine, hydraulic pumps and undercarriage. This processor has 16,500 frame hours, tight boom, head is in good working condition, new computer, swing gear is in good condition, heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

John Deere 690ELC 1998
$69,500
Ponsse Ergo Harvester with a H73E Harvesting Head

Ponsse Ergo Harvester with a H73E Harvesting Head

2005 Ponsse Ergo Harvester with a H73E Harvesting Head. This machine has a Mercedes Benz engine, runs and starts good, 17,000 hours, pre-heat system, strong hydraulics and cylinders, new main pump at 13,500 hours, new joystick controls, old ones to go with as spares, tight boom, H200 crane, 710 tires with Eco track and a set of rear chains. Head and measuring system are in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA

Ponsse Ergo 2005
$98,000
TimberPro TL735-B Processor with Logmax 7000XT Fixed Head

TimberPro TL735-B Processor with Logmax 7000XT Fixed Head

2014 TimberPro TL735-B Processor with Logmax 7000XT Fixed Head. This machine has a Cummins tier 3 300 HP engine, runs and starts good. 8,100 hours. New injectors, oil pan gasket, and rear engine seal. Pumps resealed and checked. Espar heat engine and hydraulics. Pump drive new input shaft and bearings. All regular maintenance done on schedule, oils changed every 1,000 hours, engine oil every 500 hours. Undercarriage is @ 50%, 24" double grouser pads. Processor head is stronger and more productive than other fixed heads. New Logmate 500 computer and head module. $40,000 in recent updates and work done on machine. New roto bearing on head, new saw motor, new saw bar holder, auto level option, new leveling cylinders, new A/C pump. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberpro TL735-B 2014
$289,000
Timbco 420B Processor

Timbco 420B Processor

1994-95 Timbco 420B Processor with a Fabtek 4 Roller Head. This equipment has a Cummins engine, runs and starts good, strong hydraulics, few minor leaks, tight boom, front idler was replaced, decent roller and sprockets, 22" single grouser pads. Head has good feed rollers, grab arms, and knives, updated computer. Heat, A/C, and lights. Includes head, updated computer, manual, extra bars, and chains. Fabtek head can be purchased separately. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Timbco 420B 1995
$29,900
2013 CAT 501HD

2013 CAT 501HD

CAT 501HD TRACKED HARVESTER 6 CYL CAT PRO HEAT THIRD MEASURING WHEEL FOUR ROLLER HEAD

CAT 501HD 2013
$259,000
TimberPro TL725B Processor with Rolly II R24R Head

TimberPro TL725B Processor with Rolly II R24R Head

2010 TimberPro TL725B Processor with Rolly 2 R24R Intermittent Disc Processing Head with Dasa4 operating system. ~9100 hours on carrier. Cummins 8.3 300 HP engine. Undercarriage is estimated @ 80%, 24" single grouser pads. Very clean and straight machine and head. No major hydraulic leaks. Webasto Pre-heater and fire protection. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberpro TL725B 2010
$215,000
Ponsse Processing Operation for Sale - Buffalo & Ergo

Ponsse Processing Operation for Sale - Buffalo & Ergo

Ponsse processing operation for sale. 2014 Ponsse Ergo Harvester and 2015 Ponsse Buffalo 8 Wheel DB Forwarder with timber sales available as well. *2014 Ponsse Ergo Harvester has a H7 Head. This equipment has the Mercedes Benz engine, runs and starts good, all maintenance has been done by Ponsse, 5,500 hours, Pre heater, strong hydraulics and cylinders, crane and squirt boom are in good working order, H7 head and measuring system are in good working condition, 700 tires with tracks. Heat, A/C, and lights. *2015 Buffalo 8 Wheel Forwarder. This machine has a Mercedes Benz engine, runs and starts good, all maintenance has been done by Ponsse, 5,500 hours, Pre heater, strong hydraulics and cylinders, crane and squirt boom are in good working order, K100 crane, 700 tires with tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machines are located in Northcentral USA.

Ponsse Ergo & Buffalo 2014
$Call for Price
TimberPro TN725C Processor with a Log Max 7000 Head

TimberPro TN725C Processor with a Log Max 7000 Head

2016 TimberPro TN725-C Processor with a Log Max 7000 Head. This machine has 2,700 hours as of August 30, 2018, Cummins QSC 8.3 - 300 HP engine, Caterpillar D6 size track frames with double-flanged rollers, 24" pads, 6' squirt boom, Lohmann final drives, Rexroth 2-speed motors. 2004 Log Max 7000 has had saw and feed wheel motors replaced, valve bank resealed, new knives, all cylinders repacked. Logmate 400 computer system. Carrier has fire suppression system, Espar pre-heater, deluxe air-ride seat with heat and lumbar support, heat, A/C, and LED lighting. Owner/Operator machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberpro TN725C 2016
$345,000
John Deere 703JH Harvester w/ Waratah HTH622B Head *SOLD*

John Deere 703JH Harvester w/ Waratah HTH622B Head *SOLD*

2013 John Deere 703JH Harvester with a Waratah HTH622B Head. Hour meter reads ~5,100 hours, Pro Heat system, TimberRite measuring system. This machine is extremely clean and dry. No welding evident on the machine or the head. All panels open as they should. The machine is very tight and clean all around including the 622 head. Undercarriage is @ 75% 24" double grouser pads, tight controls, heat, A/C, and lights. Additional pictures available upon request. Contact Aaron @ Red Pine Equipment 218-720-0933 for more information or to set up a viewing of the machine. Machine is located in Northcentral USA. ***SOLD***

John Deere 703JH 2013
$259,000
NEW 2018 EcoLog 590E with LogMax 7000

NEW 2018 EcoLog 590E with LogMax 7000

NEW 2018 EcoLog 590E with a LogMax 7000 complete with a powerful D8 Volvo Penta engine. Unmatched stability along with zero worries in transportation and loaded with features too long to list. Call us for more information or stop in and see one!

EcoLog 590E 2018
$Call for Price
Valmet 911 Processor with a 965 Dangle Head

Valmet 911 Processor with a 965 Dangle Head

2001 Valmet 911 Processor with a 965 Dangle Head. This machine has a 5.9 Cummins engine, runs and starts good, 18,000 hours, newer valve cover gaskets, new batteries, new slew gear on cab, strong hydraulics and cylinders, new link where head connects. New computer screen, head will need some rewiring. Tight boom, bogies are in good order, tires are @ 40%. Heat, A/C needs a charge. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Valmet 911 2001
$44,500