Harvesters/Processors For Sale

Sort By:

Photo	Title	Make	Model	Year	Price
	Valmet 503 Harvester with a 16" Head *SOLD* 1989 Valmet 503 Harvester with a 16" Head. hour meter reads 6,800 hours, 4 cylinder John Deere engine, runs and starts, will need some injectors soon, new right final drive, new joysticks, quick couplers. 23.1 x 26 tires set of chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Valmet	503	1989	$Call for Price
	Fabtek FT-133 Harvester with a Fabtek 4 Roller Head 2000 Fabtek FT-133 Harvester with a Fabtek 4 Roller Head. This machine has new pumps, new engine, 1,500 hours on both. Decent undercarriage. Final drives have been resealed, new oil cooler, 3rd measuring wheel, proheat. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Fabtek	FT-133	2000	$89,500
	Ponsse Ergo with Ponsse H73 Processing Head 2002 Ponsse Ergo with Ponsse H73 Processing Head. Engine runs well. Machine has several cylinders, hoses and fittings leaking. 700/55-34 and 700/50-26.5 tires @ 30%. HN 125 Crane. Sheet metal fairly straight. Pins and bushings in decent condition. Machine is working and cutting wood. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2002	$49,000
	Fabtek FT 133 Processor with a 4 Roller Head 2004 Fabtek FT 133 Processor with a Fabtek 4 Roller Head. This machine has 12,991 hours, runs and starts good, strong hydraulics and cylinders, head is in working order, tight pins and bushings, undercarriage is in good working condition, heat, A/C, and lights. Kawasaki pump and updated U/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA	Fabtek	FT133	2004	$83,500
	John Deere 1270D Harvester 2008 John Deere 1270D Harvester. 11,000 hours. Recent new injectors in engine which runs and starts good. H480 head has been rebuilt. 2 outer drive motors and one inner motor were rebuilt recently. Espar engine, hydraulic, and cab preheat system, strong hydraulics and cylinders, reman work pump and drive pump in the last 500 hours, tight boom and center section, stick and lift cylinders redone, bogies are in good working order, solid rear ends, 700 tires @ 50% with rear tracks, one set of chains. Feed rollers and grab arms are in good condition, Timbermatic HHM 300 computer. Heat, A/C,and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	John Deere	1270D	2008	$144,900
	HSM 405 H2 Steep Slope Harvester 2013 HSM 405H2 Steep Slope Harvester. This machine has approx. 5,000 hours, engine and the crane replaced at 4,000 hours, IVECO engine 6.7L, NAF balanced portal tandem axles, 100% selectable differential lock, machine has steep slope winch mounted on unit. The head is a Logmax 6000, Loglift crane, tilting cab, spare tire, air cushioned heated seat. 710 tires and tracks. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.	HSM	405 H2	2013	$Call for Price
	Komatsu PC200LC Processor with a Waratah HTH622B Head 2005 Komatsu PC200LC Processor with a Waratah HTH622B Head. This machine has a Komatsu 6 cyl. engine, runs and starts good, strong hydraulics and cylinders, recent hydraulic pump, newer undercarriage, sprockets tracks, Waratah HTH622 B head has new computer and new module from Access Forestry, newer screen, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.	Komatsu	PC200LC	2005	$79,500
	Rottne H20 Harvester with a Logmax 7000 Head 2006 Rottne H20 Harvester with a Logmax7000 Head. This machine has a John Deere engine, runs and starts good, Logmax has new feed rollers, new saw motor, computer is in good working order, strong hydraulics, no leaks, tight center section, tight boom, main pin was just replaced, repacked jib boom cylinders, cab rotation is in good condition, bogies and axles are in good order, pre-heater, 750 tires @ 50% with tracks. Heat, A/C and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Rottne	H20	2006	$162,000
	Hyundai 130 Processor with LogMax 750 Head 1999 Hyundai 130 Processor with a 2002 LogMax 750 Head. This equipment has a rebuilt head in 2015, brand new Cummins engine, runs and starts good, one year warranty on engine, 28" bar & chain, 26" cut, same as a 7000 LogMax, extra computer & feed rollers, undercarriage is @ 60%, strong hydraulics, tight boom, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Hyundai	130	1999	$53,500
	Link Belt 210X2 Processor with Southstar QS500 Head 2013 Linkbelt 210X2 Processor with Southstar QS500 Head. This machine has 9,691 hours, runs and starts good, head reseal & major cylinders have been done, dry machine, newer main hydraulic pump, undercarriage is in good working order, tight boom, head is in good working condition, heat, A/C, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.	Link Belt	210X2	2013	$198,500
	Timberking TK711HD Processor*SOLD* 2006 Timberking TK711HD Processor with a Log Max 750 Dangle Head. This machine has a CAT 3126 engine, runs and starts good, Cat preheating system, 6,717 hours on meter, strong hydraulics and cylinders, undercarriage is in good working condition, 23.5" pads, Omron computer system, head and saw in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. *SOLD*	Timberking	TK711HD	2006	$Call for Price
	Ponsse Ergo Harvester 2006 Ponsse Ergo Harvester with 15,000 hours. Machine runs and starts good and is equipped with the H73E head in great working condition. Good rubber, tracks, and chains go with machine, heat, A/C, radio, and all gauges work. Machines working daily. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Ponsse	Ergo	2006	$165,000