Sort By:   GridGallery
Photo Title
Make Model Year Price
TimberPro TL-725B Harvester with a Rolly II Head ***SOLD***

TimberPro TL-725B Harvester with a Rolly II Head ***SOLD***

2013 TimberPro TL-725B Harvester with a Rolly II Head. Hour meter reads 7,500 hours, Cummins 8.3 engine, runs and starts good, 1,000 hours on a new pan gasket and main seal, flex plate was done at the same time, Espar pre heat system, fire suppression system. Strong hydraulics, new main pump 1,200 hours ago, drive pumps in good working order, new swing bearing and trunnion. Rolly II head has more hours then the machine but is in good working order, grab arms and both bottom and topping saw are in good working condition. Good glass, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timberpro TL-725B 2013
$149,900
Timbco 415B Harvester with a Newer Rolly II Head ***SOLD***

Timbco 415B Harvester with a Newer Rolly II Head ***SOLD***

1996 Timbco 415B Harvester with a Newer Rolly II Head. This equipment has a Cummins 5.9 engine, runs and starts good, strong hydraulics ans cylinders. Undercarriage is in good working order, double grouser pads. Rolly II head is solid, grab arms and feed rollers all in good working order measuring system works as it should, Woodland computer. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD***

Timbco 415B 1996
$49,500
Valmet 503 Harvester with a 16" Head

Valmet 503 Harvester with a 16" Head

1989 Valmet 503 Harvester with a 16" Head. hour meter reads 6,800 hours, 4 cylinder John Deere engine, runs and starts, will need some injectors soon, new right final drive, new joysticks, quick couplers. 23.1 x 26 tires set of chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Valmet 503 1989
$13,500
Ponsse Ergo 8 Wheel Harvester  ***SOLD***

Ponsse Ergo 8 Wheel Harvester ***SOLD***

2014 Ponsse Ergo 8 Wheel Harvester with a Ponsse H8 Harvesting Head. Hour meter reads 9,700 hours, runs and starts good, strong hydraulics and cylinders, updated pump drive coupler, tight pins and bushings, tight C5 crane. New comfort grip controls at 9,000 hours. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA. ***SOLD***

Ponsse Ergo 2014
$339,500
2010 John Deere 703JH Harvester

2010 John Deere 703JH Harvester

2010 JOHN DEERE 703JH TRACKED HARVESTER 6 CYL DEERE 181 HP WARATAH 622B HEAD

John Deere 703JH Unknown
$265,000
Timberjack 1270B Processor with 762C Head ***SOLD***

Timberjack 1270B Processor with 762C Head ***SOLD***

1999 Timberjack 1270B Processor. This machine has a DT 466 Engine, 762C Head with newer saw assembly & bearing. 700 tires with tracks tires approximately 50-60%, newer main pressure and pilot valves, tight center, pins and bushings have normal wear, pre-heat, good solid machine. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timberjack 1270B 1999
$39,900
John Deere 803MH Processor ***SOLD***

John Deere 803MH Processor ***SOLD***

2015 John Deere 803MH Processor with a Waratah 623C Head. This machine starts & runs good, 4,603 hours on meter, engine and hydraulic pre-heater, cooler debris guard, 5 year JD Link telematics, 30" double grouser pads with slides, undercarriage is @ 50%. Lap seat belt & air ride, standard counterweight, LED work lights, 6.13M boom, premium radio, rear pull down shade, & toolbox. Waratah 623C Head has auto tensioning, 3/4 chain, tilt and 360 rotation. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 803MH 2015
$299,000
Morbark Wolverine Three Wheel with Hahn HSG 140 Harvester

Morbark Wolverine Three Wheel with Hahn HSG 140 Harvester

1995 Morbark Wolverine with a Hahn HSG140 Processor Head. Hour meter reads 5,200 hours, Cummins 4BT engine, runs and starts good, strong hydraulics and controls, tight boom, head is in good working order, extra bars and chains, 23.1x26 tires, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Morbark Wolverine 1995
$28,900
Fabtek 133 Harvester with a Fabtek 4 Roller Head  ***SOLD***

Fabtek 133 Harvester with a Fabtek 4 Roller Head ***SOLD***

2000 Fabtek 133 Harvester with a Fabtek 4 Roller Head. This equipment has a John Deere engine, runs and starts good, Proheat system. New hydraulic pump, strong cylinders, tight boom and head, new Woodland computer system, grab arms and feed rollers are in good working order. Undercarriage is @ 75%, 24" double pads. Heat, a/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD***

Fabtek 133 2000
$66,500
Timbco 415EX Harvester With Rolly II Head ***SOLD***

Timbco 415EX Harvester With Rolly II Head ***SOLD***

2004 Timbco 415EX Harvester With Rolly II Head. Hour meter reads 12,400 hours, Sisu engine, runs and starts good, no blow by, new injection pump. Undercarriage is @ 80%, 24" double grouser pads, new drive motor. Strong hydraulics and cylinders, new pilot pump. Tight boom, newer rotate motor. Rolly II head 2 valve, updated measuring system and new measuring wheel, Woodland ISF computer, grab arms and rollers are in good order as well as the saw. Heat, A/C, and LED lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timbco 415EX 2004
$62,900
TimberPro 725B Processor with a Rolly II Head

TimberPro 725B Processor with a Rolly II Head

2010 TimberPro 725B Processor with a Rolly II Head. This machine has a 8.3 Cummins engine, runs and starts good, new injectors last year, strong hydraulics and cylinders, rebuilt final drive on one side, decent CAT undercarriage. Rolly II head feed rollers and grab arms are in good working order, Woodland computer system. Hour meter reads 12,500 hours. Heat, A/C, and lights. Working Daily. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timberpro 725B 2010
$Call for Price
Caterpillar TK711 Harvester ***SOLD***

Caterpillar TK711 Harvester ***SOLD***

2004 Caterpillar TK711 Harvester with a 2012 Fabtek 240 Head. This machine has 9,000 hours on carrier and 2,000 hours on the head, strong hydraulics and cylinders, undercarriage is @ 75% with 24" single grouser pads, tight boom. Head and measuring system are in good working, feed rollers and grab arms are in good order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

CAT TK711 2004
$Call for Price