Sort By:   GridGallery
Photo Title
Make Model Year Price
Ponsse Wisent 8 Wheeled Forwarder

Ponsse Wisent 8 Wheeled Forwarder

2016 Ponsse Wisent 8 Wheeled Forwarder. Hour meter reads 7,500 hours. Mercedes engine starts and runs good. 710x26.5 tires are estimated at 65%. K70 crane is tight, squirt boom & SuperGrip grapple. Strong hydraulics and hydrostatic-mechanical drive system. Front Blade, Webasto preheat system. Heat, A/C, LED lights, & radio. Available September. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Ponsse Wisent 2016
$225,000
Ponsse Wisent Forwarder

Ponsse Wisent Forwarder

2011 Ponsse Wisent 6 Wheeled Forwarder. Hour meter reads 15,581 hours. Mercedes engine. 700/55-34 tires on the front are estimated at 75%. 710/45-26.5 tires on the rear are estimated at 80%. Can include double diamond chains at 90% and Clark tracks at 60% for an additional $5,000. K70+S crane is tight. Center was just re-pinned and is tight. New bucket installed in 2021. New clutch plate. Heated and leveling seat. Webasto preheat system. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Wisent 2011
$136,500
Valmet 860 6 Wheeled Forwarder

Valmet 860 6 Wheeled Forwarder

2001 Valmet 860 6 Wheeled Forwarder. Hour meter reads 15,000 hours. Sisu engine, starts and runs good. Rear 710-/45-26.5 tires are estimated 40%. Front tires are estimated at 75% with one being new. Set of tracks at 20% are included. New A/C compressor and bogie bearings. Cranab 850 crane with minimal slack and a squirt boom. SureGrip grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Valmet 860 2001
$67,500
John Deere 1110D Forwarder

John Deere 1110D Forwarder

2006 John Deere 1110D Forwarder. Hour meter reads 19,661 hours. John Deere 6068 engine, new head gasket. 600/55-26.5 tires are estimated at 30%, 600/65-34 tires are estimated at 80%, includes a set of tracks that are estimated at 50%. Has welding on the bunks & no stairs. CF510 crane is tight. Espar preheat system. All new A/C system. Heat, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 1110D 2006
$115,000
John Deere 1110E Forwarder

John Deere 1110E Forwarder

2010 John Deere 1110E Forwarder. Hour meter reads 13,950 hours. John Deere 6068T engine. 710/45-26.5 tires are estimated at 50%. Supergrip bucket, tight CF510 crane & center section. Blade is in good condition. Espar preheat system. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 1110E 2010
$185,000
Komatsu 855.1 8 Wheeled Forwarder

Komatsu 855.1 8 Wheeled Forwarder

2015 Komatsu 855.1 8 Wheeled Forwarder. Hour meter reads 9,800 hours. AGCO 6cyl engine. 710/45x26.5 tires are estimated at 70%. CRF 8.1 crane with SuperGrip bucket and squirt boom. Webasto preheat system. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Komatsu 855.1 2015
$215,000
Logset 5FP GT 8 Wheeled Forwarder

Logset 5FP GT 8 Wheeled Forwarder

2020 Logset 5FP GT 8 Wheeled Forwarder. Hour meter reads 923 hours. AGCO Power 74 AWF 6cyl engine. Hydrostatic mechanical transmission. 710/45-26.5 tires are estimated at 90%. Mesera 83 crane is tight. 78,180 ft lb lift capacity. 14'-16.5' adjustable load bay. Preheat system. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Logset 5FP GT 2020
$353,500
1987 IRON MULE 5000

1987 IRON MULE 5000

1987 IRON MULE 5000 4 CYL FORD STANDARD TRANS LEVER CONTROLS ROTATOR BYPASS BUCKET 23.1-26 RUBBER

Iron Mule 5000 1987
$29,500
Timbco 820D Forwarder

Timbco 820D Forwarder

2001 Timbco 820D Forwarder. Hour meter reads 8,399 hours. Cummins 8.3L engine. 710/45-26.5 tires are estimated at 85%. Originally a clam bunk forwarder, the clam bunk can be included for an additional cost. Center & loader are tight. Blade is in good condition. This unit is setup to be a combo machine, a 2008 Ponsse H8 Harvesting Head with top saw can be included for an additional cost. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA.

Timbco 820D 2001
$152,500
Ponsse Buffalo Forwarder

Ponsse Buffalo Forwarder

2022 Ponsse Buffalo Forwarder. Hour meter reads 800 hours, warranty until 1,800 hours. Mercedes Benz OM 926 engine. 710/45-26.5 tires are estimated at 90%, includes 2 sets of tracks. Webasto preheat system. K90 crane is tight. Supergrip bucket. Heat, A/C, radio, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Ponsse Buffalo 2022
$465,000
Valmet 840.2 Forwarder

Valmet 840.2 Forwarder

2005 Valmet 840.2 8 Wheeled Forwarder. Hour meter reads 23,634 hours. Sisu engine starts right up and runs good. Turbo is in good condition. 700/45-26.5 tires are estimated at 40%, includes a set of tracks estimated at 50%. Blade option. Bucket has some wear and the main boom cylinder has a minor leak around the vapor seal. Webasto preheat system. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Valmet 840.2 2005
$56,900
John Deere 1110E Forwarder

John Deere 1110E Forwarder

2011 John Deere 1110E 6 Wheeled Forwarder. Hour meter reads 16,326 hours. John Deere 6068T engine. 710/45-26.5 rear tires are estimated at 80%. Front tires are estimated at 90%. Rotating cab. Supergrip bucket, tight crane, center, & grapple, straight bunks, blade is in good condition. Espar preheat system. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 1110E 2011
$132,500