Forwarders For Sale
Photo |
Title
|
Make | Model | Year | Price |
Ponsse Wisent Forwarder2011 Ponsse Wisent 6 Wheeled Forwarder. Hour meter reads 15,581 hours. Mercedes engine. 700/55-34 tires on the front are estimated at 75%. 710/45-26.5 tires on the rear are estimated at 80%. Can include double diamond chains at 90% and Clark tracks at 60% for an additional $5,000. K70+S crane is tight. Center was just re-pinned and is tight. New bucket installed in 2021. New clutch plate. Heated and leveling seat. Webasto preheat system. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Wisent | 2011 |
$136,500
|
|
Valmet 860 6 Wheeled Forwarder2001 Valmet 860 6 Wheeled Forwarder. Hour meter reads 15,000 hours. Sisu engine, starts and runs good. Rear 710-/45-26.5 tires are estimated 40%. Front tires are estimated at 75% with one being new. Set of tracks at 20% are included. New A/C compressor and bogie bearings. Cranab 850 crane with minimal slack and a squirt boom. SureGrip grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Valmet | 860 | 2001 |
$67,500
|
|
John Deere 1110D Forwarder2006 John Deere 1110D Forwarder. Hour meter reads 19,661 hours. John Deere 6068 engine, new head gasket. 600/55-26.5 tires are estimated at 30%, 600/65-34 tires are estimated at 80%, includes a set of tracks that are estimated at 50%. Has welding on the bunks & no stairs. CF510 crane is tight. Espar preheat system. All new A/C system. Heat, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 1110D | 2006 |
$115,000
|
|
John Deere 1110E Forwarder2010 John Deere 1110E Forwarder. Hour meter reads 13,950 hours. John Deere 6068T engine. 710/45-26.5 tires are estimated at 50%. Supergrip bucket, tight CF510 crane & center section. Blade is in good condition. Espar preheat system. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 1110E | 2010 |
$185,000
|
|
Komatsu 855.1 8 Wheeled Forwarder2015 Komatsu 855.1 8 Wheeled Forwarder. Hour meter reads 9,800 hours. AGCO 6cyl engine. 710/45x26.5 tires are estimated at 70%. CRF 8.1 crane with SuperGrip bucket and squirt boom. Webasto preheat system. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | 855.1 | 2015 |
$215,000
|
|
Logset 5FP GT 8 Wheeled Forwarder2020 Logset 5FP GT 8 Wheeled Forwarder. Hour meter reads 923 hours. AGCO Power 74 AWF 6cyl engine. Hydrostatic mechanical transmission. 710/45-26.5 tires are estimated at 90%. Mesera 83 crane is tight. 78,180 ft lb lift capacity. 14'-16.5' adjustable load bay. Preheat system. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Logset | 5FP GT | 2020 |
$353,500
|
|
Timberjack 1110 8 Wheeled Forwarder ***SOLD***2001 Timberjack 1110 8 Wheeled Forwarder. Hour meter reads 14,942 hours. Cummins 5.9 engine. Supergrip 360° bucket. Rear 700/50-26 tires are estimated at 85%, fronts are estimated at 35%. Includes a set of Olofsfors tracks that are estimated at 60%. Can also include a spare set of 710/45-26.5 tires that are estimated at 20% for an additional $3,000. New A/C compressor, resealed squirt boom cylinder, & new slides in the squirt boom. 1,000 hours ago it had a new hydrostatic drive, hydraulic pump, bearing & bushing in the tower, center section rebuild, & electronics coming off the valve bank and preheater. Panels are straight, boom is tight. Espar preheat system. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Timberjack | 1110 | 2001 |
$Call for Price
|
|
2006 Deere 1110DThis unit has an enclosed cab, with heat and AC, 6068HT John Deere Turbo Diesel engine, Hand controls, CF510 extendable boom with J De Souza grapple, The bunk is approximately 16'x8' The blade is approximately 71". There is a Uniden UM 380 Communication Radio, Stereo, 710/55-34 front tire size, 710/45-26.5 rear tire size. The tires are at roughly 75% We do take trades and we can assist with trucking and financing as well if needed. Thank you for looking!! |
- | - | 2023 |
$109,500
|
|
Ponsse Buffalo Forwarder ***SOLD***2021 Ponsse Buffalo Forwarder. Hour meter reads 4,481 hours. Mercedes OM 926 engine. 710/45-26.5 tires are estimated at 60%. Includes a set of tracks that are estimated at 80%, also includes a spare rim and tire. K100+ crane & center are tight, Supergrip 360S grapple. Webasto preheat system. Heat, A/C, radio, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. ***SOLD*** |
Ponsse | Buffalo | 2021 |
$Call for Price
|
|
1987 IRON MULE 50001987 IRON MULE 5000 4 CYL FORD STANDARD TRANS LEVER CONTROLS ROTATOR BYPASS BUCKET 23.1-26 RUBBER |
Iron Mule | 5000 | 1987 |
$29,500
|
|
Timbco 820D Forwarder2001 Timbco 820D Forwarder. Hour meter reads 8,399 hours. Cummins 8.3L engine. 710/45-26.5 tires are estimated at 85%. Originally a clam bunk forwarder, the clam bunk can be included for an additional cost. Center & loader are tight. Blade is in good condition. This unit is setup to be a combo machine, a 2008 Ponsse H8 Harvesting Head with top saw can be included for an additional cost. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA. |
Timbco | 820D | 2001 |
$152,500
|
|
Timberjack 610 Forwarder ***SOLD***1999 Timberjack 610 Forwarder. Hour meter reads ~13,000 hours. Cummins 4BT engine. 23.1x26 tires are estimated at 60%, includes 2 like new sets of chains. Serco 4000 loader is tight. There is a toolbox included that is not pictures. Service and operator manuals. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD*** |
Timberjack | 610 | 1999 |
$Call for Price
|