Sort By:   GridGallery
Photo Title
Make Model Year Price
Tigercat 718 Feller Buncher

Tigercat 718 Feller Buncher

2002 Tigercat 718 Feller Buncher. This equipment has a new engine less then a 100 hours, runs and starts good, strong hydraulics and hydrostats, all clinders are in good condition, tight pins and bushing, straight disc good teeth, 28L x 26 tires @ 75%. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Tigercat 718 2002
$37,500
Barko 775B Feller Buncher with 22" Head

Barko 775B Feller Buncher with 22" Head

1996 Barko 775B Feller Buncher with 22" Head. This equipment has a 2013 5.9 reman Cummins engine, runs and starts good, strong hydraulics and transmission, pumps and transfer case have been gone through, decent pins and bushings. Head has new teeth on saw and spares to go with it. 2 brand new 28Lx26 tires, newer chains all around. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Barko 775B 1996
$29,500
Franklin 170 Feller Buncher with Shear Head

Franklin 170 Feller Buncher with Shear Head

1986 Franklin 170 Buncher with Shear Head. This equipment has a Detroit 453 engine, newer head, recently tuned up, strong transmission, hydraulics and cylinders are in good order, 18" shear head is in good working condition, 23.1x 26 tires with bear claw chains, heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Franklin 170 1986
$14,000
2005 Timberjack 608S Feller Buncher

2005 Timberjack 608S Feller Buncher

Very nice owner operated buncher. Just over 15,000 hours. Excellent running 6081T Deere Engine with great track power. Reversing fan. Electronic engine bay door with ladder. Good Undercarriage with single grouser pads. Super clean inside and out. This machine has been very well cared for. 2 speed travel works great. Serial number is WC608SX007182. 22 inch felling head in with lateral in good working condition. Heat & A/C. Joystick controls. AM/FM CD radio. Please feel free to give us a call!!! We do take trades depending on what you have and we can assist with trucking if needed. Thanks for looking!

Timberjack 608s 2005
$89,500
Hydro Ax 411 Feller Buncher with 16" Shear Head

Hydro Ax 411 Feller Buncher with 16" Shear Head

1985 Hydro Ax 411 Feller Buncher with 16" Shear Head. This equipment has a newer 453 Detroit engine, runs and starts good, quick couplers, strong hydraulics and cylinders, pump was updated, decent pins and bushings, 23.1 x 26 tires @ 50%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hydro-Ax 411 1985
$11,900
2004 Hydro Ax 570 Feller Buncher

2004 Hydro Ax 570 Feller Buncher

2004 570 Hydro Ax with 22" sidecut 1 owner operator 4650 original hours. Has newer carbides, new skylight and windshield, 2 new front firestone tires 28lx26. Joystick controls, heat, air, quick couplers, heat grid and 1 set babac bearpaw chains. 5.9 cummins that does not burn any oil and has no hydraulic leaks. Very tight machine that is greased daily well maintained and ready to go to work. Retired

Hydro-Ax 570 22" Sidecut 2004
$75,000
Komatsu XT430L-3 Track Feller Buncher ***SOLD***

Komatsu XT430L-3 Track Feller Buncher ***SOLD***

2016 Komatsu XT430L-3 Tracked Feller Buncher with a Quadco 22B 360 Head. This buncher has a Cummins 300 HP engine runs and starts good, 1,400 hours, Espar pre-heat system, block heater, strong hydraulics and pumps, auxiliary pump 45cc 28 gpm. Leveling system is in good condition, standard main boom, 13' straight arm with tree deflector. Quadco 22B head high speed disc saw in good working order. Undercarriage is @ 90% with 28" double grouser pads. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Komatsu XT430L-3 2016
$335,000
CAT 511 Feller Buncher w/ a Quadco Head ***SOLD***

CAT 511 Feller Buncher w/ a Quadco Head ***SOLD***

2010 CAT 511 Feller Buncher with a 2010 Quadco Head. This equipment has a C9 CAT engine, hour meter reads 7,800 hours, clean machine. New rotating motors in head, new teeth and holders, repacked closing and accumulator cylinders. New injectors approximately 1,000 hours ago (done by Ziegler CAT). New water pump 200 hours ago. Newer Jib cylinder. 35-1/2" pads on machine (comes with an extra set of 24" high grouser rails) Webasto pre heater, heat, A/C, and LED lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

CAT 511 Unknown
$134,900
Morbark Wolverine 3 Wheeled Feller Buncher

Morbark Wolverine 3 Wheeled Feller Buncher

1996 Morbark Wolverine 3 Wheel Cutter. This machine has a Perkins engine, runs and starts good, hour meter reads 4,645 hours, strong drive motors, lever controls for bunching head & foot petals for driving, strong hydraulics and cylinders, 2 new 30.5x32 tires with chains, straight disc, new teeth, Red Dot A/C may need a charge, heat, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

Morbark Wolverine 1996
$27,500
Valmet 430FXL Feller Buncher

Valmet 430FXL Feller Buncher

2009 Valmet 430FXL Feller Buncher. This equipment has a Cummins 8.3 engine, starts & runs good, has engine plug in, 11,500 hours, strong hydraulics and cylinders. Updated undercarriage, new rails, sprockets, and idlers 1500 hours ago. 24" pads. 22" 360 degree head in good condition, straight disc, leveling system is in good working order, heat, A/C, lights and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Valmet 430 FXL 2009
$129,000
Barko 775B Feller Buncher

Barko 775B Feller Buncher

1994 Barko 775B Feller Buncher. This machine has a Cummins 8.3 engine, runs and starts good, under 9,000 hours, strong hydraulics, charge pump and hydrostatics have been gone through, few leaks, decent center section, grab arms and accumulator arms have been re pinned and bushed recently. 22" head, straight disc good teeth. 28L x 26 tires @ 25%. Mono tracks and chains available. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Barko 775B 1994
$27,500
Timbco T445-C Feller Buncher ***SOLD***

Timbco T445-C Feller Buncher ***SOLD***

1998 Timbco T445-C Feller Buncher. This equipment has a Cummins 8.3 engine, runs and starts good, 11,400 hours, strong hydraulics and cylinders, Quadco 22B Head continuous rotation in good working order, straight disc has new teeth. Undercarriage is @ 75%, new sprockets 400 hours ago, 28" single grouser pads. Boom has been replaced, all pumps are in working order. Has a little play in one leveling shaft. Heat, A/C, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Timbco T445-C 1998
$69,900