Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 440C Cable Skidder

John Deere 440C Cable Skidder

1982 John Deere 440C Cable Skidder. Hour meter reads 8,500 hours, hour meter is believed to be original & working. Following parts are new or recently replaced: batteries, fuel lift pump, seat, alternator, radiator and winch bands. 18.4x26 Firestone Forestry Special tires @ 90%, single diamond chains on the rear of skidder, tight ring chains on front. 2 newly rebuilt steering cylinders. 5/8" Super Swedge mainline. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 440C 1992
$32,900
John Deere 540E Cable Skidder ***SOLD***

John Deere 540E Cable Skidder ***SOLD***

1992 John Deere 540E Cable Skidder. This machine has a reman 4 cyl. John Deere engine, runs and starts good, transmission and axles have been gone through, strong hydraulics and cylinders, winch is in good working order, 5/8" to 9/16" cable also has extra 5/8" to 3/4" cable, decent pins and bushing. New driveshaft, newer winch drive shaft and yoke, 28Lx26 tires - front are @ 30%, rear tires are @ 75%, new Bear Paw chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 540E 1992
$31,000
John Deere 548E Skidder ***SOLD***

John Deere 548E Skidder ***SOLD***

1996 John Deere 548E Grapple Skidder. Newer engine, starts & runs good, machine was just repinned and re-bushed from front to back by John Deere, includes center, cradle, blade, & grapple. Strong PowerShift transmission, new shaft, strong hydraulics and cylinders, new glass, heat, no A/C, 28Lx26 tires @ 70% with a set of chains. Contact Aaron @ Red Pine Equipment 218-720-0933. Skidder is located in Northcentral USA. ***SOLD***

John Deere 548E 1996
$39,500
Timberjack 240A Skidder ***SOLD***

Timberjack 240A Skidder ***SOLD***

1987 Timberjack 240A Cable Skidder with a Gearmatic Winch. This machine has a Cummins 4BT engine, runs and starts good, 4 speed transmission in good working order, new flywheel and bearing in the clutch, axles and cradles are in good condition, pretty tight center section, little play in the steer pins, 18.4x34 tires, front tires are @ 50%, back tires are @ 10%. Single Diamond front chains and Double Diamond rear chains. Also has a spare tire to go with. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Timberjack 240A 1987
$29,500
Franklin Q80 Skidder  ***SOLD***

Franklin Q80 Skidder ***SOLD***

2005 Franklin Q80 Dual Arch Grapple Skidder with Winch. This equipment has a Cummins 5.9 engine, runs and starts good, Power Shift 6 speed transmission, strong hydraulics and cylinders, both pumps were rebuilt last year, new electronic shifter, M-36 360 grapple, winch is in good working order. 30.5x32 tires @ 95%, also has a new set for the front. Heat, A/C, lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northwest USA. ***SOLD***

Franklin Q80 2005
$39,500
Tigercat 630B Skidder

Tigercat 630B Skidder

2003 Tigercat 630B Dual Arch Grapple Skidder. This equipment has a newer Cummins engine and 2 new pumps, strong hydraulics and cylinders, decent pins and bushings, good 50" tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southcentral USA.

Tigercat 630B 2003
$37,500
John Deere 440C Cable Skidder ***SOLD***

John Deere 440C Cable Skidder ***SOLD***

1980 John Deere 440C Cable Skidder. This equipment has a 4 cylinder turbo engine, runs and starts good, engine was overhauled 3 years ago. Rebuilt winch, new starter, new clutch, new seat. Parking brake is in good working order. 4 brand new 18.4 x 26 tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 440C 1980
$28,000
Clark Ranger 666D Skidders

Clark Ranger 666D Skidders

2 Clark Ranger 666D Skidders - One of these machines was working until recently and the other one is a parts machine & is missing the transmission & a few other parts. In the pictures, the parts machine is the one with only 2 tires on it, it's missing the rear tires/wheels. Notice the working machine has a very bad blade, but the one on the parts machine could be switched to the running machine, but it will also need some welding to get it in good shape. Both have 5.9 Cummins, but the parts machine engine will need some work. Both machines have winches & grapples. Parts machine includes: 5.9 Cummins that needs work Radiator with grill/guard Clark winch Front & rear axles 2 good 23.1x26 tires w/ rims Blade Hydraulic cylinders Log arch with rollers Muffler guard on top of cab Belly pan guards & engine side panels Valves Driveshaft(s) Hoses Cradle assembly Sweeps (bars from front of hood to top of cab) The complete machine and the parts from the parts machine should fit in a 40' container. Both machines are currently located near the port of Savannah Georgia at a facility that can dismantle & containerize them. We estimate $9,000 for dismantling & containerizing both machines, including ocean freight to Paramaribo Suriname or Georgetown Guyana, so approximate total cost including delivery would be $24,900. Contact Kelly @ Red Pine Equipment 218-720-0933. ***REDUCED FROM $19,500***

Clark Ranger 666D Unknown
$15,900
John Deere 648GIII Skidder

John Deere 648GIII Skidder

2006 John Deere 648GIII Dual Arch Grapple Skidder. This equipment has 400 hours on a rebuilt engine, runs and starts good, strong hydraulics and cylinders, decent center section, new grapple pins. New rear tires and chains, front tires and chains are @ 85%, 30.5x32 tires, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

John Deere 648GIII 2006
$Call for Price
John Deere 648GIII Skidder ***SOLD***

John Deere 648GIII Skidder ***SOLD***

2003 John Deere 648GIII Dual Arch Grapple Skidder. This skidder runs and starts good has been well maintained, Sweda axles, rear axle was rebuilt. Direct Drive, tight center section, strong hydraulics and cylinders, engine is currently being rebuilt. New 30.5x 32 tires with dual rims, heat, A/C, and LED lights. Duals are available for additional cost. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 648GIII Unknown
$61,500
John Deere 648H Skidder

John Deere 648H Skidder

2012 John Deere 648H Dual Arch Grapple Skidder with Winch. This machine has 7,000 hours, runs and starts good, tight pins and bushings center and arch, strong hydraulics and cylinders, Torque converter machine, 30.x32 tires, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 648H 2012
$114,500
John Deere 748G Skidder ***SOLD***

John Deere 748G Skidder ***SOLD***

1998 John Deere 748G Dual Arch Grapple Skidder. This machine has 3,500 hours on a new John Deere crate engine, pump was done at the same time, strong hydraulics and cylinders, tight center section, arch and grapple are in good working order, strong transmission, 30.5x32 tires with chains, heat, lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

John Deere 748G 1998
$39,500