Sort By:   GridGallery
Photo Title
Make Model Year Price
Ponsse Beaver Harvester

Ponsse Beaver Harvester

2006 Ponsse Beaver Harvester. This a 4 cyl. Mercedes Benz engine, runs and starts good, hour meter reads 21,500 hours, strong hydraulics and drive system. BW (Big wheel) 60 head. Tight HN 200 Crane, automatic greasing system. H6/H7 compatible upgrade. 700/50-26.5 front tires, 710/45-26.5 rear tires with tracks. Heat, A/C, and light package. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Beaver 2006
$64,500
Tigercat 630E Dual Arch Grapple Skidder

Tigercat 630E Dual Arch Grapple Skidder

2017 Tigercat 630E Dual Arch Grapple Skidder with Winch. Hour meter reads 5,131 hours, runs and starts good, strong hydraulics and transmission, new center section, arch and grapple are in good working order. Strong winch. 35.5 tires & 24.5 32 dual tires. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.

Tigercat 630E 2017
$152,500
Peterson 5900 Whole Tree Chipper

Peterson 5900 Whole Tree Chipper

2008 Peterson 5900 Whole Tree Chipper. This chipper has a Reman CAT C18 engine with 4,000 hours, runs and starts good, strong hydraulics and cylinders, feed chain and rollers are all in good working order, new clutch, disc is in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.

Peterson Pacific 5900 2008
$87,500
Komatsu 228LC with a 2018 Ryans Dangle Saw Head

Komatsu 228LC with a 2018 Ryans Dangle Saw Head

2001 Komatsu 228LC with a 2018 Ryans Dangle Saw Head. This equipment has a Cummins 5.9 engine, runs and starts good, hour meter reads 8,800 hours, strong hydraulics and cylinder, drive motors are in good working order, undercarriage is @ 50%+, 33" triple grouser pads, extra roller on u/c, tight boom. Ryan head has a 30" cut, good grab arms, and saw blade. Heat, A/C, and lights. Also has quick coupler & Forestry guard package. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Komatsu 228LC 2001
$92,500
Timberjack 1010B Forwarder***ON HOLD***

Timberjack 1010B Forwarder***ON HOLD***

2000 Timberjack 1010B Double Bunk 6 Wheel Forwarder. This machine has a Cummins 4BT engine, runs and starts good, Pro Heat system and quick couplers. Newer hydrostatic pump a year ago, strong hydraulics and cylinders, many cylinders were just repacked, tight boom and newer 1/3 cord continuous rotation grapple, squirt boom works as it should, center section is pretty tight. New front tires 23.1 x 26, rear tires 600's - 1 new, others are @! 30% with tracks and chains @ about 50%. Heat, A/C, and LED lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD***

John Deere 1010B 2000
$51,500
International Truck w/Prentice 180D & 60" Siiro Slasher

International Truck w/Prentice 180D & 60" Siiro Slasher

1980's International Load-Star Loader Truck with a 1990's Prentice 180D Loader and a 60" Siiro Slasher. This truck has a 671 Detroit engine, runs and starts good, 13 speed transmission. Prentice 180D Loader has a John Deere engine, runs and starts good, electric block heater. Joystick controls, tight boom and pins. Turn table is in good working order, newer swing motor, Barko 1/3 bypass bucket. Sirro Slasher has straight a blade and good teeth. Cab has heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Prentice - Unknown
$24,500
2000  Timberjack 1010B Forwarder

2000 Timberjack 1010B Forwarder

2000 Timberjack 1010B Forwarder, New center pins, Tracks included.

Timberjack 1010B 2000
$52,900
Valmet 415 FX  2009

Valmet 415 FX 2009

2009 Valmet 415 FX w/ Rolly II heads, Woodland Computer Systems, Cummins 6.7 Power

Valmet - 2009
$Call for Price
John Deere 759G Feller Buncher

John Deere 759G Feller Buncher

2005 John Deere 759G Feller Buncher. Hour meter reads 7,570 hours, runs and starts good, strong hydraulic and pumps. Pump was gone through at 4,000 hours, new final drive, bearings were changed every 1,500 hours on final drives, 250 hour oil change, leveling system is in good order. Complete undercarriage @ 300 hours ago, 24" pads. 22" head 40 degree tilt, straight blade, good teeth and grab arms. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 759G 2005
$125,900
Timberjack 460C Skidder

Timberjack 460C Skidder

2000 Timberjack 460C Skidder. This machine has approximately 500 hours on a new recon Cummins 5.9 motor, all new hoses, new center section and cradle, new hydraulic pump and a spare pump goes with machine. 35.5 x 32 rubber, well maintained and working daily. Call Erik @ Red Pine Equipment 218-720-0933 for more info or to setup a viewing. Machine is located in Northcentral USA.

Timberjack 460C 2000
$37,500
Timberjack 230A Forwarder

Timberjack 230A Forwarder

1996 Timberjack 230A Forwarder. This forwarder has new front cradle pins and bushings. new blade pins and bushings. both blade cylinders have been repacked. newer clutch. Valve bank resealed, pins and bushings in boom have all been changed over the last 5 years. New steering and shift cables. LED lights. New starter, new alternator, new bucket and rotator. New exhaust. New swing motors on boom plus 1 gear box on boom. New differential lock assembly on rear axle. New seat many of the hoses have been changed. Hydro pump and pump drive are about 4 years old. Main cylinder was repacked and changed to 3/8” thick barrel. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberjack 230A 1996
$38,500
John Deere 648D Grapple Skidder

John Deere 648D Grapple Skidder

1989 John Deere 648D Grapple Skidder. This equipment has a newer engine and the hydraulic pump was rebuilt in 2005. Cylinders in good shape. Tight center section. Has arch and grapple set up for it but is currently set up with a 1997 Delta TTS Power Disc Trencher. Trencher is not included in the quoted sale price but can be sold with the machine, arch and grapple for $79,900. 30.5 x 32 tires @ 75% with a set of chains. Cab has heat, A/C, and lights. Stacking blade. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 648D 1989
$27,500