| Photo |
Title
|
Make | Model | Year | Price |
|
Ford F600 Log Truck with a Husky XL220 Log Loader1977 Ford F600 Log Truck with a Husky XL220 Log Loader. The truck has a dual axle carrier, 5&4 transmission, 477 gas motor, engine has been switched to a Cummins. newer continuous rotation grapple, ~19,000 hours, 6,000 hours on Cummins motor and new pumps. Starts, runs and functions well. Main boom cylinder was replaced, gear box for the turn table is all rebuilt. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southwest USA. |
Ford | F600 | 1977 |
$28,500
|
|
Prentice 280D Log Loader2004 Prentice 280D Log Loader. This machine has a John Deere engine, runs and starts good, has been well maintained, strong hydraulics, tight boom and grapple, lower frame has been reinforced, tight control, Pitts carrier, good brakes and tires, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Prentice | 280D | 2004 |
$34,900
|
|
Timberjack 1270 Rail Chipper1995 Timberjack 1270 Rail Chipper. This equipment has 13,200 hours, Re-manufactured Perkins 1006T engine, 160 HP, 6,300 hours on reman. Chipper head is a Bandit 250XP, 2,500 hours, 12" capacity, chipper engine is a Cummins 6BT with 2,200 hours, 145 HP. Loader is a Nokka 3966 23' reach 3,000 LBS. lift capacity, All chipper functions are controlled in the cab. Chipper head can level up to 55%. Eco Tracks and Chains are included. Rail track system. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Timberjack | 1270 | 1995 |
$53,900
|
|
Komatsu PC250 Carrier with a Limmit 2200B Delimber1994 Komatsu PC250 Carrier with a Limmit 2200B Delimber. This equipment has a Komatsu 6 cyl. engine. Owner stated this machine ran good when it was parked but may need a tune up, engine has been rebuilt, strong hydraulics has a few leaks, undercarriage is @ 40%, 28" triple grouser pads, straight boom has been re-enforced in a few spots, decent knives and grab arms, swing lock has been bypassed may need a wiring harness. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | PC250 | 1994 |
$24,900
|
|
Komatsu PC200LC Processor with a Waratah HTH622B Head2005 Komatsu PC200LC Processor with a Waratah HTH622B Head. This machine has a Komatsu 6 cyl. engine, runs and starts good, strong hydraulics and cylinders, recent hydraulic pump, newer undercarriage, sprockets tracks, Waratah HTH622 B head has new computer and new module from Access Forestry, newer screen, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Komatsu | PC200LC | 2005 |
$79,500
|
|
Timberjack 450 Skidder1995 Timberjack 450 Dual Arch Grapple Skidder. This equipment has a Cummins 6BT engine, runs and starts good, 4 speed Clark transmission in good condition, WR-10 axles, strong hydraulics and cylinders, tight pins and bushings in center and arch, Esco grapple, factory blade extensions, 30.5 x 32 tires with chains, 24 bolt rims. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Timberjack | 450 | 1995 |
$42,500
|
|
John Deere 843H Feller Buncher2000 John Deere 843H Feller Buncher. Hour meter reads 12,500 hours, John Deere 6068 engine, runs and starts good, strong hydraulics and cylinders, Waratah model FD120 bunching head, tires are 67x34.00x25, quick couplers, block heater, new glass, set of chains, heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
John Deere | 843H | 2000 |
$56,500
|
|
John Deere 437D Loader2012 John Deere 437D Loader with a CSI Ground Saw and Delimber. This equipment has 11,000 hours, runs and starts good, strong hydraulics and cylinders, tight boom and grapple, tight controls, swing gear is in good working order, carrier has good brakes and tires, ground saw and delimber are in good working condition, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Located in Southeast USA. |
John Deere | 437D | 2012 |
$86,500
|
|
2010 John Deere 1410D ForwarderJOHN DEERE 1410D 8 WHEELED FORWARDER 6 CYL HYDROSTATIC 2 STAGE BOOM ONE OWNER 700X26.5 RUBBER |
John Deere | 1410D | 2010 |
$169,000
|
|
Rottne H20 Harvester with a Logmax 7000 Head2006 Rottne H20 Harvester with a Logmax7000 Head. This machine has a John Deere engine, runs and starts good, Logmax has new feed rollers, new saw motor, computer is in good working order, strong hydraulics, no leaks, tight center section, tight boom, main pin was just replaced, repacked jib boom cylinders, cab rotation is in good condition, bogies and axles are in good order, pre-heater, 750 tires @ 50% with tracks. Heat, A/C and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Rottne | H20 | 2006 |
$162,000
|
|
Morbark 30/36 Drum Chipper2008 Morbark 30/36 Drum Chipper. This equipment currently has 4,120 hours, runs and starts good, strong hydraulics, drum and in-feed all are in good working order, maintained and run daily, complete maintenance and repair records available. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Morbark | 30/36 | 2008 |
$152,900
|
|
Hyundai 130 Processor with LogMax 750 Head1999 Hyundai 130 Processor with a 2002 LogMax 750 Head. This equipment has a rebuilt head in 2015, brand new Cummins engine, runs and starts good, one year warranty on engine, 28" bar & chain, 26" cut, same as a 7000 LogMax, extra computer & feed rollers, undercarriage is @ 60%, strong hydraulics, tight boom, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Hyundai | 130 | 1999 |
$53,500
|