| Photo |
Title
|
Make | Model | Year | Price |
|
John Deere 540A Skidder1976 John Deere 540A Cable Skidder. This skidder runs and starts good, new injection pump, batteries, and starter. Has decent center section, strong hydraulics and cylinders, winch is in good working order, 18.4x34 tires, rear loaded, new ice chains on rear and new ring chains on front. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
John Deere | 540 A | 1976 |
$24,500
|
|
John Deere 1710D 8 Wheeled Forwarder2006 John Deere 1710D 8 Wheeled Forwarder. This machine has 16,000 hours, runs and starts good, has had a lot of Idle time, straight boom, tight pins and bushings, front and rear bogies in good working condition, tires are @ 50% tracks are @ 75%. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
John Deere | 1710D | 2006 |
$99,900
|
|
Mack Truck with a Lemco 185 Loader & 60" Lemco Slasher1976 Mack Truck with a Lemco 185 Loader & 60" Lemco Slasher. This loader has a John Deere 6 cyl. engine, runs and starts good, Truck has a 300 engine, runs and starts good, loader has all new O-rings and seals, cylinders have all been redone, joy stick controls, tight boom and grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Mack | - | 1976 |
$26,500
|
|
HSM 405 H2 Steep Slope Harvester2013 HSM 405H2 Steep Slope Harvester. This machine has approx. 5,000 hours, engine and the crane replaced at 4,000 hours, IVECO engine 6.7L, NAF balanced portal tandem axles, 100% selectable differential lock, machine has steep slope winch mounted on unit. The head is a Logmax 6000, Loglift crane, tilting cab, spare tire, air cushioned heated seat. 710 tires and tracks. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada. |
HSM | 405 H2 | 2013 |
$Call for Price
|
|
Ford F600 Log Truck with a Husky XL220 Log Loader1977 Ford F600 Log Truck with a Husky XL220 Log Loader. The truck has a dual axle carrier, 5&4 transmission, 477 gas motor, engine has been switched to a Cummins. newer continuous rotation grapple, ~19,000 hours, 6,000 hours on Cummins motor and new pumps. Starts, runs and functions well. Main boom cylinder was replaced, gear box for the turn table is all rebuilt. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southwest USA. |
Ford | F600 | 1977 |
$28,500
|
|
Prentice 280D Log Loader2004 Prentice 280D Log Loader. This machine has a John Deere engine, runs and starts good, has been well maintained, strong hydraulics, tight boom and grapple, lower frame has been reinforced, tight control, Pitts carrier, good brakes and tires, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Prentice | 280D | 2004 |
$34,900
|
|
Timberjack 1270 Rail Chipper1995 Timberjack 1270 Rail Chipper. This equipment has 13,200 hours, Re-manufactured Perkins 1006T engine, 160 HP, 6,300 hours on reman. Chipper head is a Bandit 250XP, 2,500 hours, 12" capacity, chipper engine is a Cummins 6BT with 2,200 hours, 145 HP. Loader is a Nokka 3966 23' reach 3,000 LBS. lift capacity, All chipper functions are controlled in the cab. Chipper head can level up to 55%. Eco Tracks and Chains are included. Rail track system. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Timberjack | 1270 | 1995 |
$53,900
|
|
Komatsu PC200LC Processor with a Waratah HTH622B Head2005 Komatsu PC200LC Processor with a Waratah HTH622B Head. This machine has a Komatsu 6 cyl. engine, runs and starts good, strong hydraulics and cylinders, recent hydraulic pump, newer undercarriage, sprockets tracks, Waratah HTH622 B head has new computer and new module from Access Forestry, newer screen, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Komatsu | PC200LC | 2005 |
$79,500
|
|
Timberjack 450 Skidder1995 Timberjack 450 Dual Arch Grapple Skidder. This equipment has a Cummins 6BT engine, runs and starts good, 4 speed Clark transmission in good condition, WR-10 axles, strong hydraulics and cylinders, tight pins and bushings in center and arch, Esco grapple, factory blade extensions, 30.5 x 32 tires with chains, 24 bolt rims. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Timberjack | 450 | 1995 |
$42,500
|
|
John Deere 437D Loader2012 John Deere 437D Loader with a CSI Ground Saw and Delimber. This equipment has 11,000 hours, runs and starts good, strong hydraulics and cylinders, tight boom and grapple, tight controls, swing gear is in good working order, carrier has good brakes and tires, ground saw and delimber are in good working condition, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Located in Southeast USA. |
John Deere | 437D | 2012 |
$86,500
|
|
Rottne H20 Harvester with a Logmax 7000 Head2006 Rottne H20 Harvester with a Logmax7000 Head. This machine has a John Deere engine, runs and starts good, Logmax has new feed rollers, new saw motor, computer is in good working order, strong hydraulics, no leaks, tight center section, tight boom, main pin was just replaced, repacked jib boom cylinders, cab rotation is in good condition, bogies and axles are in good order, pre-heater, 750 tires @ 50% with tracks. Heat, A/C and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Rottne | H20 | 2006 |
$162,000
|
|
Morbark 30/36 Drum Chipper2008 Morbark 30/36 Drum Chipper. This equipment currently has 4,120 hours, runs and starts good, strong hydraulics, drum and in-feed all are in good working order, maintained and run daily, complete maintenance and repair records available. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Morbark | 30/36 | 2008 |
$152,900
|