Sort By:   GridGallery
Photo Title
Make Model Year Price
CAT 501HD Processor

CAT 501HD Processor

2008 CAT 501HD Processor with a Dangle Processor Head. This machine has 9,800 hours, runs and starts good, strong hydraulics, undercarriage is in good working order - 65-75%, tight boom, has been re-enforced, computer in good working condition, PH head in good working condition was completely rebuilt 8 months ago, new grab arms, feed rollers, new saw motor, heat, A/C, and radio. Machine has been well maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

CAT 501HD 2008
$114,900
Morbark 2755 Flail Chipper

Morbark 2755 Flail Chipper

2011 Morbark 2755 Flail Chipper. This machine has 10,500 hours, CAT C27 tier II 875 HP main engine, twin disc hydraulics wet clutch, CAT 440 HP tier III C13 flail drive engine with triple gear box 1: 1 reduction gear box, they run and starts good, 27"x 55" infeed opening, feed roller is in good order. Discharge system consisting 60-1/2" wide x23' long telescoping drag chain conveyor drive, 7/8 chips, hydraulic tilt down cab for transport, Mor-lift 500 knuckleboom loader, joystick control, Rotobec 442 grapple, 3 knife disc, heat, A/C, and emergency shut down system. Re-worked flail pumps and rebuilt gear box for flail pumps 11/16. New bottom flail 11/16. New face plate and pocket holders on disk, injectors re-sealed. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located Southcentral USA.

Morbark 2755 2011
$349,000
2016 Tigercat 822D Feller Buncher

2016 Tigercat 822D Feller Buncher

28" high-grouser pads, tri-rail hd track, cold weather package with engine pre-heater, LED light package, high torque 340 degree wrist, Tigercat 5401 head, fire suppression, 500 Hrs, excellent condition, serious offers welcome

Tigercat 822D 2016
$385,000
2006 Ponsse Ergo Harvester w/ 2012 Crane & H7 Head

2006 Ponsse Ergo Harvester w/ 2012 Crane & H7 Head

Very clean straight well maintained harvester. Engine was replaced approx 6,000 hrs ago, crane and head have approx 4,500 hrs. New crane and head pump installed when ponsse installed the CN200 and H7. New comfort grip controls with crane and head. Lots of new updated parts. Serious offers welcome

Ponsse Ergo 2006
$190,000
John Deere 548GIII Grapple Skidder

John Deere 548GIII Grapple Skidder

2004 John Deere 548GIII Grapple Skidder. This machine has 13,000 hours, runs and starts good, strong hydraulics and cylinders, tight pins and bushings, transmission is in good working order, 28Lx26 tires, heat, A/C, and lights. Well maintained. Winch and extra drive shaft included. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 548GIII 2004
$65,900
Clark Ranger F67 Skidder ***SOLD***

Clark Ranger F67 Skidder ***SOLD***

1989 Clark Ranger F67 Skidder - Cummins 5.9, 30.5 X 32 tires, overall excellent condition, one of the nicest Rangers we've ever seen. No winch on the machine currently but we can provide a winch with drive shaft and controls for approximately $4,500. Price on skidder is $27,900. Located in Minnesota USA. We are able to disassemble and put this machine into a container for overseas shipment. Contact Kelly @ 218-720-0933. ***SOLD***

Clark Ranger F67 1989
$27,900
Morbark 2755 Flail Chipper

Morbark 2755 Flail Chipper

2009 Morbark 2755 Flail Chipper. This machine has 12,000 hours, CAT C27 tier II 875 HP main engine, twin disc hydraulics wet clutch, CAT 440 HP tier III C13 flail drive engine with triple gear box 1:1 reduction gear box, run and start good, 27"x 55" infeed opening, feed roller is in good order. Discharge system consists of 60-1/2" wide x 23' long telescoping drag chain conveyor drive, 7/8 chips. Disk was removed and rear wall rebuilt, Clutch is out right now, $24k to rebuild, hydraulic tilt down cab for transport. Mor-lift 500 knuckleboom loader, joystick control, Rotobec 360 grapple, heat, A/C, and emergency shut down system. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located Southcentral USA.

Morbark 2755 2009
$289,000
Ponsse Buffalo King Forwarder

Ponsse Buffalo King Forwarder

2010 Ponsse Buffalo King Double Bunk Forwarder. This unit is the Anniversary Edition, Mercedes 6 cyl. engine, runs and starts good, 7,700 hours, front blade, bunk extenders, automatic engine pre-heater rebuilt at 7,200 hours, fire suppression package, hydraulic activated headache rack, Xenon light package, Premium seat with heat and A/C built-in, over-sized grapple. Center bearing was replaced at 6,500 hours, New computer installed at 7,200 hours, New pontoons still in the box, 2 sets of Eco tracks. Uses Shell Rotella T6 motor oil and Mobil DTE 10 Excel hydraulic oil. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Buffalo King 2010
$255,000
Tigercat 620C Skidder

Tigercat 620C Skidder

2010 Tigercat 620C Dual Arch Grapple Skidder with Winch. This equipment runs and starts good, strong hydraulics and transmission, tight center section, arch and grapple are in good order, has a little play in bottom arch pin, strong winch, no cable, cylinders are in good order, one little seep on blade cylinder, 30.5x32 tires, 3 @ 65% or better, 1 tire @ 35%. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machines is located in Northcentral USA.

Tigercat 620C 2010
$72,500
Franklin 132 Forwarder

Franklin 132 Forwarder

1994 Franklin 132 Single Bunk Forwarder. This machine has a 4BT Cummins engine, runs and starts good, strong hydraulics and transmission, tight boom and grapple, cylinders are all in good order, main boom cylinder was repacked, heat, A/C needs a new belt, 23.1x26 tires @ 85%. Working Daily. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Franklin 132 1994
$32,500
2014 Ponsse Buffalo Forwarder

2014 Ponsse Buffalo Forwarder

Ponsse Buffalo 2014 3500 hours Perfect condition c/w one set of new tracks Night heater One owner from new Machine located in Ireland will deliver to the US for $250000 Call Steve (518) 361-2507

Ponsse Buffalo 2014
$250,000
John Deere 648E Skidder

John Deere 648E Skidder

1993 John Deere 648E Grapple Skidder. This skidder has less than 750 hours on a new John Deere engine, runs and starts good, strong hydraulics and transmission, tight center section, grapple is in good order. Brand New Firestone 30.5x32 rear tires. Many new hoses, all cylinders were repacked, new seat, good heater. Bear Claw chains on front tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 648E 1993
$39,500