| Photo |
Title
|
Make | Model | Year | Price |
|
Bobcat 1080C Feller Buncher with a 16" Bar Saw1989 Bobcat 1080C Feller Buncher with a 16" Bar Saw. Hour meter reads 8,840 hours, 4BT Cummings, new auxiliary pump, new heater, extra bars and chains, new bearings and shaft that run the chain, new hydraulic fluid and filters, good tires and tracks. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bobcat | 1080C | 1989 |
$19,500
|
|
John Deere 540B Skidder1978 John Deere 540B Cable Skidder. Hour meter reads 6,693 hours. 23.1x26 tires are at 95%. Winch is strong, blade works as it should. Tight center pins. Transmission pump is currently out, it'll run and go through gears well, but doesn't have enough pressure to pull a tree out of the woods. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 540B | 1978 |
$24,500
|
|
Tree Farmer C6F Forwarder1994 Tree Farmer C6F Forwarder. Rebuilt Cummins 5.9 BT engine has 500 hours on it. Powershift transmission. 710 tires, front tires are 90% with ring chains on them, rear tires are at 25% with double diamond chains. Tight center. Has high plow pins, & the blade has been widened to 10'. Repainted to Timberjack green. Enclosed cab has heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Tree Farmer | C6F | 1994 |
$72,000
|
|
Timberjack 1270 Harvester with a 762C Head1999 Timberjack 1270 Harvester with a 762C Head. This machine has a 466E Navistar 6 cylinder engine, runs and starts good, 1,500 hours on a total engine rebuild, strong hydraulics, few minor leaks, tight pins and bushing, squirt boom is in good order, joystick controls are in good working condition, 700 tires a few nicks, grab arms and rollers are in working order, good glass. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Timberjack | 1270 | 1999 |
$46,900
|
|
John Deere 270 with Keto 525 Processing Head1998 John Deere 270 with Keto 525 Processing Head. Hour meter reads 8,500 hours. John Deere 6068H engine starts and runs good. 32" pads, undercarriage is in good working order. Yard bucket with original teeth is included. Keto 525 processing head works as it should. It's a track-drive head, has 3,000 hours. This is a one owner machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
John Deere | 270 | 1998 |
$162,500
|
|
|
Morbark Wolverine Three Wheel ***ON HOLD***1995 Morbark Wolverine with a Hahn HSG140 Processor Head. Hour meter reads 5,200 hours, Cummins 4BT engine, runs and starts good, strong hydraulics and controls, tight boom, head is in good working order, extra bars and chains, 23.1x26 tires, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***ON HOLD*** |
Morbark | Wolverine | 1995 |
$28,900
|
|
Morbark 40/36 Chipper2015 Morbark 40/36 Chipper. Hour meter reads 2,955 hours. CAT 765 HP engine starts and runs good. No dents on the belly. Drum pockets are in good working order, drum has some welds. Feed chain and sprocket show no wear, & hydraulics are strong. Chassis and frame are good, chute frame has some welding near blower. Tires and brakes are in excellent condition. LED display. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Morbark | 40/36 | 2015 |
$359,000
|
|
Ponsse Buffalo King Forwarder ***SOLD***Salvaged 2012 Ponsse Buffalo King 8 Wheel Double Bunk Forwarder. This forwarder burnt up from the front. Many parts are still good, K100 crane and grapple, all bunks still good, tires rims, bogies, there was 9,000 hours on machine, headache rack, blade, grill. Many other parts available. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Ponsse | Buffalo King | 2012 |
$25,000
|
|
Trelan DL-18 Whole Tree Chipper1985 Trelan DL-18 Whole Tree Chipper. This equipment has a CAT 3406A engine, strong hydraulics, decent cylinders. tight disc bearing, new belts, couple sets of knives. Hood 7000 loader. Infeed and drive chain are in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in northcentral USA. |
Trelan | DL-18 | 1985 |
$34,000
|
|
CAT 518 Grapple Skidder1990 CAT 518 Grapple Skidder. Hour meter does not work but the machine is estimated to have around 12,000 hours. 28Lx26 tires at 70%, with double diamond studded ice chains that are at 90%. New center pins and bushings. Steer cylinders with pins and bushings have recently been rebuilt. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
CAT | 518 | 1990 |
$34,500
|
|
John Deere 335D Loader ***ON HOLD***2011 John Deere 335D Loader. Hour meter reads 12,707 hours. John Deere 6068T 6cyl engine starts and runs good. 29'-10" knuckleboom. Strong hydraulics and cylinders, tight boom and grapple. Cab has preheater, heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***ON HOLD*** |
John Deere | 335D | 2011 |
$73,500
|
|
John Deere 540B Skidder ***ON HOLD***1980 John Deere 540B Cable Skidder. Hour meter reads 8,348 hours. John Deere 4045T engine. Replaced engine and transmission. 3,700 hours on the reman engine. 2,300 hours on the reman transmission. Have receipts for both. 23.1x26 tires at 90%. Custom made bed for the back of skidder, front and rear differentials. Strong winch. Blade works as it should. Tight center section. Comes with brush rake, extra winch parts, 2 sets of ring chains, and spare engine (needs to be sleeved). Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. ***ON HOLD*** |
John Deere | 540B | 1980 |
$35,900
|