Logging Equipment For Sale

Sort By:

Photo	Title	Make	Model	Year	Price
	Komatsu PC200-LC with Propac 513 Delimber 2006 Komatsu PC200LC with a ProPac 513 Delimber. This equipment starts & runs good, strong hydraulics and cylinders, undercarriage is in good order, ProPac 513 has a straight boom, good cable and roller, knives and topping saw are in good condition. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Komatsu	PC200-LC - Propac 513	2006	$Call for Price
	Ponsse Cobra HS10 Harvester with a Ponsse H53 Head 1998 Ponsse Cobra HS10 Harvester with a Ponsse H53 Head. This equipment has a Perkins 6 cylinder engine, runs and starts good, 6,500 hours on engine, new flex plate. Center cone bearing was recently redone, tight boom and grapple, double squirt boom extension in good working order, strong hydraulics and cylinders, tight bogies, few minor leaks. Ponsse 1000 computer, head is in working condition, may need a few pins and bushings. 700-45 x 22.5 tires @ 50%. Heat & lights. A/C will need some attention. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.	Ponsse	Cobra HS10	1998	$38,500
	Timberking TK520 Log Loader *SOLD* 2009 Timberking TK520 Log Loader. This equipment has 7,100 hours, CAT engine, runs and starts good, strong hydraulics and cylinders, tight boom, 360 grapple, swing gear is in good working order, outriggers in good condition, live heal. Pitts carrier good brakes and tires. Heat, A/C, and lights. Is not plumbed for saw. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. *SOLD*	Timberking	TK520	2009	$22,500
	Ponsse Bison Forwarder *ON HOLD* 2001 Ponsse Bison 6 Wheel Double Bunk Forwarder. This equipment has a newer Mercedes Benz 4 cylinder engine with approximately 6,000-7,000 hours, runs and starts good. 13,000 total machine hours. New center pins and big bearing. New rear brake, new controller, strong hydraulics and cylinders. Tight boom and grapple. Heat, A/C, and lights. Tires are in good working order with a set of tracks. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *ON HOLD*	Ponsse	Bison	2001	$87,500
	Tigercat 620E Skidder *ON HOLD* 2014 Tigercat 620E Skidder. This equipment has 35.5 x 32 rubber. Heavy Duty outboard planetary axles. For more information contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *ON HOLD*	Tigercat	620E	2014	$Call for Price
	Timbco 415C Harvester with a Ponsse H73 Head 1998 Timbco 415C Harvester with a Ponsse H73 Head. This equipment has a John Deere 6068T engine, runs and starts good, strong hydraulics and cylinders. Undercarraige is in good working order, single grouser pads. Ponsse H73 head is solid, grab arms and feed rollers are all in good working order, measuring system works as it should, Ponsse 1000 computer. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Timbco	415C	1998	$52,500
	Ponsse Ergo Harvester with H7 Head 2005 Ponsse Ergo Harvester with H7 Head. This machine has many new parts. Mercedes Benz engine, runs and starts good, strong hydraulics and cylinder. Recently new crane pump. Crane has been repined and bushings top to bottom. New center pins. New injectors and head gasket. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2005	$99,900
	Prentice 410E Loader with Ground Saw & Delimber ON HOLD 1999 Prentice 410E Loader, Ground Saw, and CTR Pull Through Delimber. This equipment has a Cummins engine, runs and starts good, strong hydraulics, tight joystick controls, tight boom, main cylinder was just rebuilt, continuous rotation grapple, Delimber and ground saw are in good working order, decent tires and brakes, heat, lights, A/C is not working. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. *ON HOLD*	Prentice	410E	1999	$33,500
	Prentice ATL 425 Log Loader 1990 Prentice ATL 425 Log Loader. This equipment has a Cummins 8.3 engine, good drive system, strong hydraulics, tight boom and grapple, cord and a half Rotobec grapple or other grapples available, extended boom, joystick pilot controls, out riggers are in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Prentice	ATL 425	1990	$19,900
	Tree Farmer C5 Single Bunk Forwarder *SOLD* 1984 Tree Farmer C5 Single Bunk Forwarder. This equipment has a Deutz 5 cylinder engine, hour meter reads 3500 hours, strong transmission, newer orbit motor, tight boom and grapple, strong hydraulics, few minor leaks, 23.1 x 26 tires, 1 set of chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Tree Farmer	C5	1984	$24,000
	Valmet 503 Harvester with a 16" Head *SOLD* 1989 Valmet 503 Harvester with a 16" Head. hour meter reads 6,800 hours, 4 cylinder John Deere engine, runs and starts, will need some injectors soon, new right final drive, new joysticks, quick couplers. 23.1 x 26 tires set of chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Valmet	503	1989	$Call for Price
	John Deere 548GII Grapple Skidder with a Winch 1999 John Deere 548GII Grapple Skidder with a Winch. This equipment runs and starts good, new engine @ 9,000 hours, 12,300 total hours. Strong hydraulics and transmission, tight center section, winch is in good working order, 28Lx26 tires, bear claw chains, heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	John Deere	548GII	1999	$57,500