Sort By:   GridGallery
Photo Title
Make Model Year Price
Ponsse Wisent Forwarder

Ponsse Wisent Forwarder

2006 Ponsse Wisent 8 Wheel Double Bunk Forwarder. This machine has a Mercedes Benz engine, runs and starts good, Pro Heat, new transmission last year installed by Ponsse, new rear-end installed last fall, bogies are in good working order, tight boom and grapple, squirt boom works as it should, decent 710 tires, blade. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Wisent 2006
$110,000
Valmet 911.3 Harvester with a 360.2 Head

Valmet 911.3 Harvester with a 360.2 Head

2006 Valmet 911.3 Harvester with a 360.2 Head. This machine has a Sisu engine, runs and starts good, strong hydraulics and cylinders. Tight boom and boom base, tight carrier good center section, bogies are in good working order, 710 tires, tracks are @ 70%, chains are @ 90%. 360.2 head has a new roller, grab arm and measuring wheel are in good condition. Maxi computer system, updated saw motor, GB bar system, Joystick controls. Many extra parts joysticks, extra parts head. Heat, A/C, LED lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Valmet 911.3 2006
$69,500
2005 John Deere 748GIII

2005 John Deere 748GIII

2005 JOHN DEERE 748GIII DUAL ARCH GRAPPLE SKIDDER 6 CYL DEERE 30.5-32 RUBBER

John Deere 748GIII 2005
$62,900
John Deere 748GII Skidder

John Deere 748GII Skidder

1998-99 John Deere 748GII Dual Arch Grapple Skidder. This equipment has a Cummins 8.3 engine, runs and starts good, Power Shift transmission in good working condition, tight center, little play in arch pins, strong hydraulics and cylinders with few minor leaks, 35.5 tires @ 50% with dual rims. Trail blade with tilt. Heat and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 748GII 1998
$39,500
John Deere 748H Skidder

John Deere 748H Skidder

2014 John Deere 748H Dual Arch Grapple Skidder with Winch. This equipment has 9,050 hours, John Deere 6.7 engine, runs and starts good, direct drive with manual option, newer hydraulic pump, tight center section, arch and grapple are tight as well. Solid axles and cradles. Strong winch. 73 x 44.00- 32 tires, 2 new rears front tires @ 50%, dual rims. Heat, A/C, and lights. Well maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 748H 2014
$111,000
Komatsu PC200 LC-5 with a Denis D-3200-T Delimber

Komatsu PC200 LC-5 with a Denis D-3200-T Delimber

1989 Komatsu PC200 LC-5 with a Denis D-3200-T Delimber. This equipment has a Komatsu engine, runs and starts good, Hour meter reads 10,594 hours, strong hydraulics and pumps. Straight boom and good cables, knives are in good working order, undercarriage is in good condition, 30" triple grouser pads. Chains and sprockets are in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Komatsu PC200 LC-5 1989
$22,500
1989 Timberjack 380B Skidder

1989 Timberjack 380B Skidder

1989 TIMBERJACK 380B GRAPPLE SKIDDER 6 CYL CUMMINS POWERSHIFT 24.5-32 RUBBER NEW TURBO ON ENGINE NEW TRANSMISSION FROM VALLEY

Timberjack 380B 1989
$34,900
CAT 311 Harvester with a Fabtek 4 Roller Head

CAT 311 Harvester with a Fabtek 4 Roller Head

2001 CAT 311 Harvester with a Fabtek 4 Roller Head. This machine has a new CAT engine, runs and starts good, strong hydraulics and cylinders, newer undercarriage with 2,500 hours, 22" pads, tight boom. Fabtek 4 roller head has new spikes on rollers, new chains, grab arms and hoses are in good working order, Upton computer, 33" Jet fit bar. Heat, A/C, and lights, air ride seat, good glass, quick couplers. Forestry Package. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 311 2001
$58,900
John Deere 648E Skidder ***ON HOLD***

John Deere 648E Skidder ***ON HOLD***

1994 John Deere 648E Dual Arch Grapple Skidder. This skidder runs and starts good, new filters and fluids, strong hydraulics and cylinders, PowerShift transmission in good working condition, tight center section, arch and grapple are in good order. 30.5 x 32 tires, 2 sets of Diamond chains - 1 set is new, 2 extra tires. New glass, heat, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***ON HOLD***

John Deere 648E 1994
$22,900
Rottne Rapid Forwarder

Rottne Rapid Forwarder

2004 Rottne Rapid Double Bunk 6 Wheel 12 Ton Forwarder. This equipment has a John Deere 4045 4 cyl. engine, runs and starts good, head gasket at 10,000 hours. Hydrostatic pump and motor replaced @ 10,000 hours, 2 new planetaries @ 10,000 hours, 2 @ 13,500. Tracks and chains @ 30%. Lots of new parts, one extra tire, two extra bogies. Machine has 14,200 frame hours, tight boom, extended boom in good working order, over size oscillation bearing. Heat, A/C, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Rottne Rapid 2004
$92,500
Komatsu PC 200 LC-7 w/ Limmit 2000B Delimber

Komatsu PC 200 LC-7 w/ Limmit 2000B Delimber

2002 Komatsu PC 200 LC-7 with a Limmit 2000B Delimber. This machine has 14,440 total hours. runs and starts good, 1,650 hours on new hydraulic pump, all hydraulic cylinders resealed, welded line bored with new pins bushings throughout, heat & A/C. Tight, dry machine. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Komatsu PC 200 LC-7 2002
$35,000
Barko 160A Log Loader with 360 Grapple

Barko 160A Log Loader with 360 Grapple

1993 Barko 160A Log Loader with 360 Grapple. This equipment has a 4 cyl. Detroit engine. Continuous rotation grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

Barko 160A 1993
$15,000