Sort By:   GridGallery
Photo Title
Make Model Year Price
Rottne H-14B Harvester with a Maskiner SP-561 Head

Rottne H-14B Harvester with a Maskiner SP-561 Head

2013 Rottne H-14B Harvester with a Maskiner SP-561 Head. This machine has just under 5,100 hours as of July 2017, John Deere 6068 engine, runs and starts good, Webasto engine, cab and hydraulic pre-heater, strong hydraulics, and cylinders, tight boom and head, rollers, grab arms, saw buck is all in good working condition, tight center, measuring system is in good order, joystick controls, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment. Machine is located in Northcentral USA

Rottne H-148 2013
$254,900
Ponsse Buffalo S16 Forwarder

Ponsse Buffalo S16 Forwarder

2000 Ponsse Buffalo S16 Forwarder. This machine runs and starts good, has ~14,000 hours, has been recently serviced, new controls, joystick boxes have been updated, rebuilt hydraulic cylinders on boom, new grapple, new chains on front. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Ponsse Buffalo S16 2000
$82,500
Morbark Model 16 Chipper with Loader

Morbark Model 16 Chipper with Loader

1996 Morbark Model 16 Chipper with Loader. This equipment has new grousers on feed wheels, re-manned CAT turbo-charged 3208, chips up to 20" diameter, strong hydraulics, had recent paint, decals, new tires, and rims. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Morbark Model 16 1996
$32,500
Komatsu PC228 Processor

Komatsu PC228 Processor

2005 Komatsu PC228 Processor with Log Max 7000 Head. This equipment has 9,000 hours, Komatsu engine, runs and starts good, strong hydraulics and pumps, new chains, new sprockets, new pads, new idlers about 1,200 hours ago, grab arms and rollers are in good working order, measuring system in good condition, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment. Machine is located in Northeast USA

Komatsu PC228 2005
$164,500
2006 Link Belt 210LX with Propac 453 Delimber

2006 Link Belt 210LX with Propac 453 Delimber

2006 Link Belt 210LX with Propac 453 Delimber and Topping Saw. This machine has an Izuzu engine with ~14,500 hours, Webasto pre-heater, auxiliary hydraulic coolers, and extra shielding. Undercarriage is in good condition - estimated @ 70%. New drive pump and boom 3 years ago. Well maintained machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Link Belt 210LX 2006
$109,900
Tree Farmer C5 Cable Skidder ***SOLD***

Tree Farmer C5 Cable Skidder ***SOLD***

1970's Tree Farmer C5 Cable Skidder. This machine has a Detroit 353 engine, runs and starts good, 4 speed manual transmission, new seals, strong hydraulics and cylinders, few minor leaks, Gearmatic model winch in good working condition, center section has some play, 18.4x26 tires @ 75%, with one set of chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Tree Farmer C5 1970
$12,500
Franklin 132 Single Bunk Forwarder

Franklin 132 Single Bunk Forwarder

1985 Franklin 132 Single Bunk Forwarder. This machine has a 4 cyl. John Deere engine, runs and starts good, decent center section, roof mounted loader in good working condition, 23.1 x 26 tires @ 75%, strong transmission. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Franklin 132 1985
$24,500
Timberjack 1270 Harvester with a 762C Head

Timberjack 1270 Harvester with a 762C Head

1999 Timberjack 1270 Harvester with a 762C Head. This machine has a 466E Navistar 6 cylinder engine, runs and starts good, 1,500 hours on a total engine rebuild, strong hydraulics, few minor leaks, tight pins and bushing, squirt boom is in good order, joystick controls are in good working condition, 700 tires a few nicks, grab arms and rollers are in working order, good glass. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 1270 1999
$62,500
CAT 535B Skidder  ***SOLD***

CAT 535B Skidder ***SOLD***

2001 CAT 535B Dual Arch Grapple Skidder with Winch. This skidder has 12,034 hours, runs and starts good, strong hydraulics and cylinders, few minor leaks, transmission is in good working condition, strong winch, 5/8 cable, little play in center not bad, 30.5x32 tires, 3 are newer, 1 @ 30%, chains all around rear are newer, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

CAT 535B 2001
$42,500
John Deere 2154 Delimber ***SOLD***

John Deere 2154 Delimber ***SOLD***

2016 John Deere 2154 with a Risley Lim-mit 2100C Delimber. Entire unit has only 400 original hours. LIKE NEW! The plastic is still on the seat. PowerTrain and Hydraulic Warranty good until 8/30/19 or 3,000 hours and can be extended even further. John Deere Tier III PowerTech 6068H engine. Engine, cab, and hydraulic pre-heat system cold weather package. 28" (700MM) double grouser pads. 7" cab riser with 4" offset. Auxiliary hydraulic coolers. Reverse fan drive. This is a great opportunity to save $40,000+ off the price of a new machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 2154 2016
$495,000
Timberjack 208 Cable Skidder

Timberjack 208 Cable Skidder

1979 Timberjack 208 Cable Skidder. This machine was re-powered with a 1997 John Deere engine, strong hydraulics and transmission, winch is in good working order, chains all around, rear tires are @ 40%, fronts are at 20-30%. Spare parts to go with it: new planetary, clutch and pressure plate, ring and pinion, two spare tires one @ 60% and one @ 20-30%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA

Timberjack 208 1979
$18,500
John Deere 648GII Skidder

John Deere 648GII Skidder

1999 John Deere 648GII Grapple Skidder with Winch. This machine has a newer engine, strong transmission, newer hydraulic pump, center has a little play, strong winch in good working condition, 30.5 tires @ 30-70%, heat, A/C is not working. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

John Deere 648G II 1999
$34,500