Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 648GIII Grapple Skidder w/ Winch ***SOLD***

John Deere 648GIII Grapple Skidder w/ Winch ***SOLD***

2005 John Deere 648GIII Grapple Skidder with Winch. Owner stated that this unit has approximately 2,000 hours on rebuilt engine, runs and starts good, pretty tight center and cradles. Owner said that this skidder has strong hydraulics, few minor leaks, 2nd owner, 30.5 tires that are around 30% each, heat, air, and radio. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA. ***SOLD***

John Deere 648GIII 2005
$54,500
Prentice 2280 Loader w/ CTR 426 Delimber ***SOLD***

Prentice 2280 Loader w/ CTR 426 Delimber ***SOLD***

2011 Prentice 2280 Loader with a CTR 426 Delimber. Owner stated that this loader has 4,300 hours, Cummins engine was just gone through, runs and starts good, strong hydraulics, no leaks, 360 grapple. Owner said that this unit has tight pins and bushings, good swing gear, tight controls, carrier in good working order, heat, and A/C. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA. ***SOLD***

Prentice 2280 2011
$133,500
Timberjack 240A Cable Skidder

Timberjack 240A Cable Skidder

1991 Timberjack 240A Cable Skidder. Owner stated that this unit has a Newer Cummins 4BTA, 2,000 hours on engine, manual transmission, new clutch, pressure plate and throwout bearing less than 1,000 hours ago. Owner said that this skidder has fair pins and bushings, winch bands replaced, tires 23.1x26 @ 25% with chains. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA.

Timberjack 240A 1991
$34,900
Woodsman 334 Chipper***SOLD***

Woodsman 334 Chipper***SOLD***

2009 Woodsman 334 Chipper. Owner stated this machine is used occasionally, 22"H x 36"W throat opening, wireless remote control, chipper has new set of knives installed, 3 sets of spare knives with jig for setting babbits, some additional parts included, new drive belt, feed chain in very good condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.***SOLD***

Woodsman 334 2009
$87,500
Peterson 5900 Chipper

Peterson 5900 Chipper

2007 Peterson 5900 Chipper. Owner stated this machine has a CAT C18 760 HP engine, new clutch, 23" capacity, 10,800 hours. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA.

Peterson Pacific 5900 2007
$134,900
Prentice 410C Knuckle Boom Log Loader

Prentice 410C Knuckle Boom Log Loader

1994 Prentice 410C Knuckle Boom Log Loader with CTR Delimber. Owner stated that this Loader has a 6BT Cummins engine, runs good, strong hydro, few minor leaks, AC, very strong loader, Prentice grapple continuously rotates. Owner stated this machine is in good condition and used daily. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.***REDUCED FROM $25,500.00***

Prentice 410C 1994
$24,900
John Deere 753G Processor

John Deere 753G Processor

2006 John Deere 753G Processor with a Waratah 616C Head. Owner stated that this unit has a new engine 0 hours, rebuilt hydraulic pump 500 hours, U/C is at 90%, new computer. Owner said that this machine has tight pins and bushings, good cylinders, tight controls, swing gear is in good working order, heat, and A/C. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Canada.

John Deere 753G 2006
$155,000
Peterson 4400 Wood Hog Grinder

Peterson 4400 Wood Hog Grinder

1999 Peterson 4400 Wood Hog Grinder. Owner stated that this unit has 4,000 hours, CAT V12 engine, runs and starts good, strong hydraulics, new clutch and bearings. Owner said that this machine has a good conveyor, grinder in good working condition, carrier has good brakes and tires. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

Peterson 4400 1999
$146,500
Trelan 23RC Chipper

Trelan 23RC Chipper

2006 Trelan 23RC Chipper. Owner stated that this unit has a CAT 765 HP V-12 engine runs and starts good, has been rebuilt, new injectors and crankshaft. Owner said that this machine has strong hydraulics, new cylinders and hoses, updated wear plates and disc. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

Trelan 23RC 2006
$Call for Price
Chambers Delimbinator Debarker

Chambers Delimbinator Debarker

2004 Chambers Delimbinator Debarker. Owner stated this is a good solid machine, new shaft bearings. Ready for the woods. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Chambers Delimbinator 2004
$55,000
Tigercat H250B Processor ***SOLD***

Tigercat H250B Processor ***SOLD***

2007 Tigercat H250B Processor with Waratah 622 Head. Owner stated this is a solid tractor, designed from the ground up for this application. Owner stated the undercarriage has at least 75% remaining wear, runs strong with no smoke or leaks, 48" cab riser, has new main hydraulic pump and new swing gear motor, processing head has been completely rebuilt which includes a new computer, the only negative found was some slight sheet metal scrapes and dents, cab in good condition. Ready to work. Contact Aaron @ Red Pine equipment 218-720-0933. Machine located in Southeast USA. ***SOLD***

Tigercat H250B 2007
$169,500
Bandit Beast 3680 Horizontal Grinder

Bandit Beast 3680 Horizontal Grinder

2000 Bandit Beast 3680 Horizontal Grinder. Owner stated this is a solid used horizontal grinder/chipper, well maintained, comes with screens for grinding and chipping, runs strong, no major repairs. Owner stated this machine has a 600 HP Deere engine that does not smoke or use a lot of oil, good feed deck and discharge belt, this is a terrific buy for a clearing contractor or for storm cleanup. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Bandit Beast 3680 2000
$109,850