Photo |
Title
|
Make | Model | Year | Price |
Tree Farmer C6F Forwarder1994 Tree Farmer C6F Forwarder. Rebuilt Cummins 5.9 BT engine has 500 hours on it. Powershift transmission. 710 tires, front tires are 90% with ring chains on them, rear tires are at 25% with double diamond chains. Tight center. Has high plow pins, & the blade has been widened to 10'. Repainted to Timberjack green. Enclosed cab has heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Tree Farmer | C6F | 1994 |
$72,000
|
|
Timberjack 1270 Harvester with a 762C Head1999 Timberjack 1270 Harvester with a 762C Head. This machine has a 466E Navistar 6 cylinder engine, runs and starts good, 1,500 hours on a total engine rebuild, strong hydraulics, few minor leaks, tight pins and bushing, squirt boom is in good order, joystick controls are in good working condition, 700 tires a few nicks, grab arms and rollers are in working order, good glass. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Timberjack | 1270 | 1999 |
$46,900
|
|
John Deere 270 with Keto 525 Processing Head1998 John Deere 270 with Keto 525 Processing Head. Hour meter reads 8,500 hours. John Deere 6068H engine starts and runs good. 32" pads, undercarriage is in good working order. Yard bucket with original teeth is included. Keto 525 processing head works as it should. It's a track-drive head, has 3,000 hours. This is a one owner machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
John Deere | 270 | 1998 |
$162,500
|
|
Morbark Wolverine Three Wheel ***ON HOLD***1995 Morbark Wolverine with a Hahn HSG140 Processor Head. Hour meter reads 5,200 hours, Cummins 4BT engine, runs and starts good, strong hydraulics and controls, tight boom, head is in good working order, extra bars and chains, 23.1x26 tires, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***ON HOLD*** |
Morbark | Wolverine | 1995 |
$28,900
|
|
Morbark 40/36 Chipper2015 Morbark 40/36 Chipper. Hour meter reads 2,955 hours. CAT 765 HP engine starts and runs good. No dents on the belly. Drum pockets are in good working order, drum has some welds. Feed chain and sprocket show no wear, & hydraulics are strong. Chassis and frame are good, chute frame has some welding near blower. Tires and brakes are in excellent condition. LED display. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Morbark | 40/36 | 2015 |
$359,000
|
|
Franklin 132 Single Bunk Forwarder ***SOLD***1985 Franklin 132 Single Bunk Forwarder. This machine has a 4 cyl. John Deere engine, runs and starts good, decent center section, roof mounted loader in good working condition, 23.1 x 26 tires @ 75%, strong transmission. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Franklin | 132 | 1985 |
$Call for Price
|
|
Ponsse Buffalo King ForwarderSalvaged 2012 Ponsse Buffalo King 8 Wheel Double Bunk Forwarder. This forwarder burnt up from the front. Many parts are still good, K100 crane and grapple, all bunks still good, tires rims, bogies, there was 9,000 hours on machine, headache rack, blade, grill. Many other parts available. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Buffalo King | 2012 |
$25,000
|
|
Trelan DL-18 Whole Tree Chipper1985 Trelan DL-18 Whole Tree Chipper. This equipment has a CAT 3406A engine, strong hydraulics, decent cylinders. tight disc bearing, new belts, couple sets of knives. Hood 7000 loader. Infeed and drive chain are in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in northcentral USA. |
Trelan | DL-18 | 1985 |
$34,000
|
|
Hydro-Ax 311C w/Bunching 16" Shear and a 8' Flail Delimber1989 Hydro-Ax 311C Bunching 16" Shear and a 8' Flail Delimber. This equipment has a John Deere 4 cyl. engine, runs and starts good, newer hydraulic pump, strong hydrostatic transmission, tight center section, newer blades on shear, shear cylinders were recently repacked, 28Lx26 Firestone tires @ 75% with a set of chains, decent glass, newer hoses, heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Hydro-Ax | 311C | 1989 |
$18,900
|
|
John Deere 540 Cable Skidder ***SOLD***1969 John Deere 540 Cable Skidder. 18.4x26 tires, 95% in rear, 50% firestone on front with chains that are at 75%. Has an updated JDB pump, swing cylinders have been repacked. Brand new radiator, GM alternator, and has a 7' blade with replaceable cutting edges. New John Deere wire harness & driveline specialists PTO shaft 3/4" mainline, 7 chockers. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
John Deere | 540 | 1969 |
$Call for Price
|
|
CAT 518 Grapple Skidder & CAT 518 Parts Machine1990 CAT 518 Grapple Skidder. Hour meter does not work but the machine is estimated to have around 12,000 hours. 28Lx26 tires at 70%, with double diamond studded ice chains that are at 90%. New center pins and bushings. Steer cylinders with pins and bushings have recently been rebuilt. Has heat. A 1984 CAT 518 parts machine can also be included in a package deal for $52,500. The 1984 CAT 518 has 5,800 hours, a good engine, transmission, and decent tires. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
CAT | 518 | 1990 |
$42,500
|
|
John Deere 335D Loader ***ON HOLD***2011 John Deere 335D Loader. Hour meter reads 12,707 hours. John Deere 6068T 6cyl engine starts and runs good. 29'-10" knuckleboom. Strong hydraulics and cylinders, tight boom and grapple. Cab has preheater, heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***ON HOLD*** |
John Deere | 335D | 2011 |
$73,500
|