Sort By:   GridGallery
Photo Title
Make Model Year Price
1999 Hyundai 210 LC-3 High Walker Delimber

1999 Hyundai 210 LC-3 High Walker Delimber

1999 Hyundai 210 LC-3 High Walker, Denharco 3500 Chain drives, Butt saw, Forestry Cab, Heavy Under pans, Auxiliary fuel tank, Hd side panels, Cat walks, 5.9 cummins...ready to work!!!!!

Hyundai 210-lc-3 H/W 1999
$Call for Price
John Deere 648H Skidder

John Deere 648H Skidder

2012 John Deere 648H D/A Grapple Skidder. This machine has 4,000 hours, runs and starts good, tight pins and bushings, strong hydraulics and DD transmission,winch is in good working condition, tires are 30.5x32 @ 50% with 2 set of chains, heat, A/C, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***REDUCED FROM $175,000.00***

John Deere 648H 2012
$162,000
Timberjack 2618 Processor

Timberjack 2618 Processor

1997 Timberjack 2618 Processor. This machine has 7,429 hours, 8.3L 6CT Cummins motor complete rebuild 457 hours ago, pumps tested and are all within specs, both planetary drives rebuilt, undercarriage is at 30%, sprocket is worn, machine has a 2000 Logmax 750 dangle head, but is still plumed for hot saw, boom pins are tight with no slop, leveling pins have a little play but not bad. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

Timberjack 2618 1997
$57,500
Hood 32000 Log Loader

Hood 32000 Log Loader

1994 Hood 32000 Log Loader. This machine has the Cummins 6BT motor, Pitts trailer, good hydraulics few leaks, good pins, is set up for a delimber Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA. ***REDUCED FROM $18,500.00***

Hood 32000 1994
$10,000
Komatsu 200LC-6 with a Lim-Mit 2000B Delimber ***ON HOLD***

Komatsu 200LC-6 with a Lim-Mit 2000B Delimber ***ON HOLD***

1997 Komatsu 200LC-6 with a 1998 Lim-Mit 2000B Delimber. This machines main pump was replaced three years ago, newer Cummins 5.9 engine, undercarriage is in good condition, straight boom, delimber in good working condition. tight controls, good hoses, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***ON HOLD***

Komatsu 200LC-6 1997
$35,900

CAT 535B D/A Grapple Skidder ***SOLD***

62,000.00 2004 CAT 535B Dual Arch Grapple Skidder. This machine has a New CAT motor with 1,500 hours on it, engine just redone by CAT for $33,000, has paper work for engine records, tight machine with 10,800 hours, 30.5x32 tires, rear tires are @ 90%, front tires are @ 50% with chains, heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northwest USA. ***REDUCED FROM $72,500.00*** ***SOLD***

CAT 535B D/A 2004
$62,000
Tigercat 240B Loader with a CTR Delimber

Tigercat 240B Loader with a CTR Delimber

2007 Tigercat 240B Loader with a CTR Delimber. This machine has 16,000 hours, Cummins engine was rebuilt 5,000 hours ago, runs and starts good, strong hydraulics, joysick controls, tight boom, main lift cylinder has been welded, CTR delimber is in good working condition, new knifes, Pitts carrier, good brakes and tires, has a seal leak, heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Tigercat 240B 2007
$54,500
Tigercat 630C Grapple Skidder

Tigercat 630C Grapple Skidder

2006 Tigercat 630C Grapple Skidder. This machine has 5,000 hours on a newer engine and hydro static, center is pretty tight, grapple in good working condition, larger fuel tanks, 30.5x32 tires 3- 40% 1 new, no major leaks, heat, A/C need to be charged. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Tigercat 630C 2006
$57,500
Hood 24000 Loader

Hood 24000 Loader

1990 Hood 24000 Loader with Rotobec bucket and 60" CTR Slasher. This machine has a John Deere engine, has been rebuilt, runs and starts good, mounted on a 1979 Mack truck, strong hydraulics, lever controls, boom in working condition. Not DOT inspected. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Hood 24000 1990
$36,000
Timberking 360 Feller Buncher

Timberking 360 Feller Buncher

2004 Timberking 360 Feller Buncher. This machine has a Blount 22" head, 7,200 hours, CAT engine, hydro static transmission, strong hydraulics (pump has been redone), new wiring harnesses 2 years ago, 34" tires @ 80%, cradles are good, has heat and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Timberking 360 2004
$58,000
CAT 525C Skidder

CAT 525C Skidder

2011 CAT 525C Skidder. This machine has 8,400 hours, one owner machine, transmission was replaced by CAT at 5,000 hours, new center section within last 6 months, new pins and bushings in boom, 30.5 tires, 3 of them are at 70% or better & 1 is @ ~30%, has been serviced every 500 hours and recently serviced and gone through by CAT, machine has been well maintained and has done pine plantation work its whole life, working every day. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. ***REDUCED FROM $114,900.00***

CAT 525C 2011
$89,900
CAT 515 Grapple Skidder w/ Winch ***SOLD***

CAT 515 Grapple Skidder w/ Winch ***SOLD***

1997 CAT 515 Grapple Skidder with Winch. Owner stated that this unit has 7,000 hours, runs and starts good, new rebuilt transmission, tight pins and bushings. Owner said that this skidder has new hoses, cylinders are in good condition, new set of tire chains, tires are 28Lx26 @ 75%, heat, and A/C. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA. ***REDUCED FROM $54,500.00*** ***SOLD***

CAT 515 1997
$51,000