Sort By:   GridGallery
Photo Title
Make Model Year Price
Vermeer WC2300 Chipper

Vermeer WC2300 Chipper

2010 Vermeer WC2300 Chipper. This machine has a CAT 440 HP engine, runs and starts good, 5,347 hours, drum, knives, feed and drive chains are all in good working condition, strong hydraulics, 3/8" chips, remote control, good brakes, and tires. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

Vermeer WC2300 2010
$139,500
John Deere 843K Feller Buncher

John Deere 843K Feller Buncher

2014 John Deere 843K Feller Buncher. This machine has 2,300 hours, runs and starts good, clean machine, strong hydraulics, tight pins and bushings, head and disc are in good working condition, has block heater and quick coupler. Full warranty until June 2017 or 5,000 hours. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 843K 2014
$195,000
John Deere 640D Skidder ***SOLD***

John Deere 640D Skidder ***SOLD***

1990 John Deere 640D Turbo Cable Skidder. This machine has a rebuilt engine 1,200 hours ago, turbo, injection pump, water pump, clutch pack on transmission was redone, will need center and blade pins soon, 2,000 hours on main and charge pumps, strong winch and cylinders, 23.1-26 tires @ 50%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

John Deere 640D 1990
$26,500
Peterson 4800E Debarker

Peterson 4800E Debarker

2011 Peterson 4800E Debarker. This machine has a CAT C9 engine, runs and starts good, new turbo, 7,100 hours, top drum is in good working condition, strong hydraulics, in-feed is in good order, could use some new teeth soon, goods brakes, and tires. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

Peterson Pacific 4800E 2011
$165,000
Prentice 630C Feller Buncher

Prentice 630C Feller Buncher

1995 Prentice 630C Feller Buncher with a Rolly GN 2252 350 Degree Head. This machine has a Cummins engine, runs and starts good, undercarriage is @ 80%, tilt is in good working order, strong hydraulics, tight boom. Newer Rolly GN 2252 head, new teeth, straight disc, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Prentice 630C 1995
$49,500
John Deere 548E Skidder

John Deere 548E Skidder

1994 John Deere 548E Grapple Skidder with Winch. This skidder has the JD 6 cylinder 4059T engine, runs and starts good, engine has been reworked, strong hydraulics and transmission, 2 new steer cylinders, tight center section, new pins and bushings on blade and grapple arch, 28Lx26 tires @ 90% rear, 60% front, full line of cable on winch, front and rear LED lights are brand new, new electric fuel pump, new heater motor. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

John Deere 548E 1994
$39,500
Shred-All 5600 Wood Chipper

Shred-All 5600 Wood Chipper

2009 Shred-All 5600 Wood Chipper. This chipper has 500 hours, A John Deere 6068T engine runs and starts good, 12' conveyor, 22" infeed roller diameter, 56" cutting drum, good tires and electric brakes. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

Shred-All 5600 2009
$92,500
Morbark 1200 Tub Grinder

Morbark 1200 Tub Grinder

1996 Morbark 1200 Tub Grinder. This machine has a 700 HP CAT 3412, 1,560 hours on machine since rebuild. New - mill, mill bearings, augers, auger shafts, hammers, tips, tub floor, tub wheels, hydraulic cylinders on conveyor radiator, clutch and pto housing, Comes with A variety of screens, 2- demo screens 4x6x11, 2- 2" screens, 1- 4" screen, and 1- 3" screen. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Morbark 1200 1996
$132,500
John Deere 648G Skidder

John Deere 648G Skidder

1997 John Deere 648G D/A Grapple Skidder. This machine runs and starts good, has 17,737 hours, strong hydraulics, Power Shift transmission, pretty tight pins and bushings, cylinders are in good working order, 30.5x32 tires, chains all around, few welds on blade, heat, lights, and A/C. Contact Erik @ Red Pine equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 648G 1997
$38,500
Ponsse Ergo Harvester

Ponsse Ergo Harvester

2006 Ponsse Ergo Harvester. This machine has 17,300 frame hours, runs and starts good, engine has been gone through, new block, rebuilt head and injectors, new drive coupler, new Input shaft, strong hydraulics, HN 200 Crane, H73E head in good working condition, new delimbing knives, auto lube. New crane swing motor and resealed drive 500 hours ago, one set of tracks @50%, set of chains @ 70-80%, heat, A/C. Machine is in good condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2006
$Call for Price
Timbco 415EX Processor with Rolly II Head

Timbco 415EX Processor with Rolly II Head

2006 Timbco 415EX Processor with a Rolly II Head. This machine has 11,800 hours, Sisu engine, runs and starts good, updated DASA 4 computer, newer coder, newer ECU and ECM, newer main wiring harness, newer injection pump, newer pilot presser pump, undercarriage is in good working condition, newer rails and sprockets 9 months ago, newer turn table bearing, newer turn motor housing. Boom has been reinforced, plate steel, and welded, feed roller in good working order, grab arm pins have been updated, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timbco 415EX 2006
$124,900
Tigercat 220 Log Loader.

Tigercat 220 Log Loader.

2008 Tigercat 220 Log Loader. This loader is on a 2008 Big John trailer, good brake and tires, Cummins cylinder engine, runs and starts good, 11,000 hours, tight 28' boom and grapple, this loader is plumbed for a delimber and saw. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Tigercat 220 2008
$60,000