Sort By:   GridGallery
Photo Title
Make Model Year Price
Valmet Komatsu 430 FXL Feller Buncher ***SOLD***

Valmet Komatsu 430 FXL Feller Buncher ***SOLD***

2008 Valmet Komatsu 430 FXL Feller Buncher. This machine has a Cummins engine, hour meter reads 8,650 hours, runs and starts good, pre-heater, strong hydraulics and cylinders, new pumps, undercarriage is @ 75%, 22" Quadco hot saw in good working order, straight blade, tight boom, grab arms and rotator are in good working condition, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Valmet Komatsu 430 FXL 2008
$184,900
TimberPro TN-735C Feller Buncher ***SOLD***

TimberPro TN-735C Feller Buncher ***SOLD***

2015 TimberPro TN-735C Feller Buncher. This machine has 1,400 hours, Cummins engine, Wabasto pre heat system, strong hydraulics, undercarriage is @ 90%, 24" single grouser pads. Saw head is a FS20 head that has been updated, new disc, new saw pump, new grab arms, heat, A/C, lights and radio. Seller is open to reasonable offers. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. we are open to trades and offers on the machine. ***SOLD***

Timberpro TN-735C 2015
$299,000
Timbco 415D Processor with a 2005 Rolly II Head

Timbco 415D Processor with a 2005 Rolly II Head

1998 Timbco 415D Processor with a 2005 Rolly II Head. This machine has a Cummins engine, runs and starts good, has some blow by, spare Cummins 5.9 engine to go with the machine as well, strong hydraulics and drive system, new pump, cylinders are in good order, swing gear and swing motor are all in good working condition, undercarriage is @ 50% 24" pads double grouser, head was just gone through, newer Woodland IFM computer system, heat, A/C has a compressor. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timbco 415D 1998
$72,500
Timberjack 450 Skidder

Timberjack 450 Skidder

1995 Timberjack 450 Dual Arch Grapple Skidder. This equipment has a Cummins 6BT engine, runs and starts good, 4 speed Clark transmission in good condition, WR-10 axles, strong hydraulics and cylinders, tight pins and bushings in center and arch, Esco grapple, factory blade extensions, 30.5 x 32 tires with chains, 24 bolt rims. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 450 1995
$42,500
Hydro Ax 711E Feller Buncher ***SOLD***

Hydro Ax 711E Feller Buncher ***SOLD***

1998 Hydro Ax 711E Feller Buncher. This equipment has 209 hours on a new John Deere engine, strong hydraulics and hydrostatics, new center section, tight pins and bushing in the head and machine, strong cylinders, 22" head with accumulator, straight disc, teeth are in good order, heat, A/C, 34.00x26 tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located Southeast USA. ***SOLD***

Hydro-Ax 711E 1998
$32,900
John Deere 843H Feller Buncher

John Deere 843H Feller Buncher

2000 John Deere 843H Feller Buncher. Hour meter reads 12,165 hours, John Deere 6068 engine, runs and starts good, strong hydraulics and cylinders, Waratah model FD120 bunching head, tires are 67x34.00x25, quick couplers, block heater, heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 843H 2000
$57,500
Prentice 210E Loader with a CSI 4400 Delimber ***SOLD***

Prentice 210E Loader with a CSI 4400 Delimber ***SOLD***

1999 Prentice 210E Loader with a CSI 4400 Delimber. This equipment has a John Deere engine, runs and starts good, strong hydraulics and cylinders few minor leaks, tight joystick controls, tight boom and grapple, rotator and swing motor are in good order, Delimber is in good working order, good brakes, will need a few tires, heat, A/C needs work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located Southeast USA. ***SOLD***

Prentice 210E 1999
$28,500
Timberjack 460D Skidder ***SOLD***

Timberjack 460D Skidder ***SOLD***

2004 Timberjack 460D Single Arch Grapple Skidder with Winch. Hour meter reads 5,600 hours, engine has 1,100 hours, runs and starts good, strong hydraulics and hydrostatics, cylinders are in good order, one grapple cylinder has a leak - not bad, winch is in good working order - 7/8 cable, 30.5x321 tires, tires are @ front 25%, rear tires @ 60%, heat, A/C needs a hose and charge, center has a little play not bad, arch pins are good. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located Southeast USA. ***SOLD***

Timberjack 460D 2004
$34,900
2003 Fabtek 344B Forwarder

2003 Fabtek 344B Forwarder

FABTEK 344B SINGLE BUNK FORWARDER 4 CYL JOHN DEERE POWERSHIFT JOYSTICK CONTROLS EXTENDABOOM 28L-26 RUBBER

Fabtek 344B 2003
$Call for Price
2005 Fabtek 153 Harvester

2005 Fabtek 153 Harvester

FABTEK 153 TRACKED HARVESTER 6 CYL JOHN DEERE RECANT OVERHAUL ON ENGINE 3000 HOURS ON UNDERCARRAIGE FABTEK FOUR ROLLER HEAD

John Deere 153 2005
$99,000
CTR 550 Pull Through Delimber with Buck Saw ***SOLD***

CTR 550 Pull Through Delimber with Buck Saw ***SOLD***

2000 CTR 550 Pull Through Delimber with Buck Saw. This equipment has low hours, saw and delimber are in good working condition, strong hydraulics. Contact Erik @ Red Pine Equipment 218-720-0933. Delimber is located in Northeast USA. ***SOLD***

CTR 550 2000
$8,000
CAT 501HD Processor ***SOLD***

CAT 501HD Processor ***SOLD***

2008 CAT 501HD Processor with a Dangle Processor Head. This machine has 9,800 hours, runs and starts good, strong hydraulics, undercarriage is in good working order - 65-75%, tight boom, has been re-enforced, computer in good working condition, PH head in good working condition was completely rebuilt 8 months ago, new grab arms, feed rollers, new saw motor, heat, A/C, and radio. Machine has been well maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

CAT 501HD 2008
$114,900