Sort By:   GridGallery
Photo Title
Make Model Year Price
Morbark Wolverine 3 Wheel Feller Buncher

Morbark Wolverine 3 Wheel Feller Buncher

1992 Morbark Wolverine 3 Wheel Feller Buncher. This equipment has a Cummins 4BT engine, runs and starts good. Strong hydraulics and cylinders, hydrostatic drive, 20" shear head. 28Lx26 tires estimated at 15% but includes two new tires & tubes. Cab has heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Morbark Wolverine 1992
$29,900
Timberjack 2518 Harvester with Bar Saw Head

Timberjack 2518 Harvester with Bar Saw Head

1992 Timberjack 2518 Harvester with Bar Saw Head. Brand new John Deere engine installed. 24" double grouser pads, undercarriage is in good working order. Bar saw felling head has good hoses and works as it should. Leveling cab with heat. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timberjack 2518 1992
$35,000
Valmet 840 6 Wheeled Forwarder

Valmet 840 6 Wheeled Forwarder

1999 Valmet 840 6 Wheeled Forwarder. Hour meter reads ~13,000 hours. This machine has a Sisu engine, extenda-boom, tracks and chains, good reliable forwarder, working daily. Major work done includes, valve bank re-seal, rear differential re-seal and brakes, new center oscillation bearings, main boom line bored, new pins and bushings, extenda-boom wear pads, radiator removed and chemical washed, starter and alternator, new A/C pump and expansion valve, new front tire, the rest are 60% or so, new water pump, grapple pins and bushings, new tracks. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Valmet 840 1999
$38,000
Komatsu 911 Harvester with 365 Harvesting Head

Komatsu 911 Harvester with 365 Harvesting Head

2016 Komatsu 911 Harvester with 365 Harvesting Head. Hour meter reads 12,300 hours. AGCO Power engine starts and runs good. Rear tires are 710/55-35 estimated at 80%, front tires are 710/45-26.6 and estimated at 70%. Set of tracks are in good condition & included. 230H crane with a squirt boom. 365 harvesting head is in good working order. Webasto preheat system. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Komatsu 911 2016
$169,500
TimberPro 735B with Log Max 7000FXT Processing Head

TimberPro 735B with Log Max 7000FXT Processing Head

2014 TimberPro 735B with Log Max 7000FXT Processing Head. Hour meter reads 11,200 hours. Cummins 8.3 engine starts and runs good. Undercarriage is estimated at 90%, with 24" double grouser pads. Log Max 7000FXT Processing Head has a 3/4 butt and .404 top saw. New FASS fuel pump system. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Timberpro 735B 2014
$259,900
Timberjack 810B Forwarder

Timberjack 810B Forwarder

1996 Timberjack 810B 8 Wheel Forwarder. Hour meter reads 15,000 hours. Cummins 3BT 111 HP engine starts and runs good. 600x22.5 tires are estimated at 80%. Solid push bar, good glass, tight center and boom with squirt. Bypass bucket. Cab has heat & lights. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Timberjack 810B 1996
$72,500
Ponsse Fox Processor  H6 Processing Head

Ponsse Fox Processor H6 Processing Head

2019 Ponsse Fox 8 Wheeled Processor with H6 Processing Head. Hour meter reads 9,700 hours. Mercedes engine starts and runs good. 710x26.5 tires are estimated at 60%. 2 sets of 1/2 tracks are included and are like new. C44+ 10m crane, with an H6 processing head. The 3 feed rollers are in good condition. Measuring system works well. Ponsse Opti information system. Ponsse OptiControl hydraulic system. New parts, oils, and maintenance has just been done. Can include a service trailer that has an air compressor, hose crimper, hoses, fittings, and an $8,000 spare swing motor for an additional $20,000. Cab has heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Ponsse Fox 2019
$355,000
2008 CAT 501HD

2008 CAT 501HD

2008 CAT 501HD TRACKED HARVESTER 6 CYL CAT REBUILT ENGINE BY MICHIGAN CAT WITH WARRANTY FOUR ROLLER HEAD

CAT 501HD 2008
$189,000
John Deere 690 with Propac 453 Delimber ***SOLD***

John Deere 690 with Propac 453 Delimber ***SOLD***

1995 John Deere 690 with Propac 453 Delimber. John Deere 6068T engine starts and runs good. Strong hydraulics and cylinders, drive motors and hoses in good working condition, U/C in good working order, 32" triple grouser pads. Propac 453 Delimber is tight & in good working order. Cab has heat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

John Deere 690 1995
$17,500
John Deere 640 Skidder

John Deere 640 Skidder

John Deere 640 Dual Arch Grapple Skidder. John Deere 6414 engine starts and runs good. Transmission needs work for 1st and 2nd gear. But reverse and forward both work. 30.5x32 tires are estimated at 20%, can include a set of chains that are estimated at 20%. Blade is in good shape, arch cylinders are good and center is tight. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 640 Unknown
$12,000
John Deere 648GIII Skidder

John Deere 648GIII Skidder

2006 John Deere 648GIII Dual Arch Grapple Skidder with Winch. This skidder has 3,000 hours on a new engine and wiring harness. New Direct Drive transmission, strong hydraulics and cylinders, decent center section, all axles and cradles are in good order, arch and grapple are tight. 30.5x 32 tires @ 45-65% with a new set of Bear Claw chains. Heat, A/C, lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 648GIII 2007
$63,500
2012 CAT 501HD

2012 CAT 501HD

2012 CAT 501HD TRACKED HARVESTER 6 CYL DEERE FOUR ROLLER HEAD AIR AND HEAT

CAT 501HD 2012
$245,000