Sort By:   GridGallery
Photo Title
Make Model Year Price
Fabtek 546C Forwarder

Fabtek 546C Forwarder

2002 Fabtek 546C 6 Wheeled Double Bunk Forwarder. This forwarder has 15,000 hours, runs and operates good, strong hydraulics and cylinders, center pins and boom pins are nice and snug along with the bucket. Log bunks are in great shape not all welded. Joystick controls are on point, great response not jumpy, very fast and accurate. Tires are fair, also has a set of tire chains for the front. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Fabtek 546C 2002
$56,900
Franklin 132 Single Bunk Forwarder

Franklin 132 Single Bunk Forwarder

1985 Franklin 132 Single Bunk Forwarder. This equipment has a newer John Deere Powertech engine, runs and starts good, strong hydraulics and cylinders, tight center section and boom, SureGrip 360 grapple, new hoses, new glass, new cab heater. Tires are @ 75%. Well maintained. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Franklin 132 1985
$33,900
Timberjack 450C Skidder ***SOLD***

Timberjack 450C Skidder ***SOLD***

1993 Timberjack 450C Dual Arch Grapple Skidder. This machine has a 5.9 Cummings, 100 hours on rebuild, new pistons and bearings, head was completely redone. 30.5x32 tires, 3 tires are at 70% and 1 is at 30%. New turbo, new engine fan, has a winch, double arch, Hydraulic pump is getting weak but still pulls wood, center pins were replaced 5 years ago, and injectors were rebuilt 100 hours ago. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timberjack 450C 1993
$24,900
Hydro Ax 611 EX Feller Buncher with 22" Koering Head *SOLD*

Hydro Ax 611 EX Feller Buncher with 22" Koering Head *SOLD*

2000 Hydro Ax 611 EX Feller Buncher with 22" Koering Head. This machine has a newer engine, turbo, main drive motor and main pump are all newer, new batteries and cables, main grab arm cylinders are new, all pressures have been tested, set, and checked. New teeth, new glass in cab, main drive gear box and the main hanger bearing were just replaced. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Hydro-Ax 611 2000
$38,500
1998 Valmet 544X Forwarder

1998 Valmet 544X Forwarder

VALMET 544X SINGLE BUNK FORWARDER 4 CYL FORD COMPLETELY REBUILT LEVER CONTROLS HEAT AND AIR NEW CENTER PINS AND BUSHINGS

Valmet 544X 1998
$49,900
Lemco 15000 Self Propelled Loader  ***SOLD***

Lemco 15000 Self Propelled Loader ***SOLD***

1994 Lemco 15000 Self Propelled Loader with a Lemco Model 6000H 60" Slasher. This loader has a live heel and has been very well maintained. Continuous turn bucket. New swing motor 1,000 hours ago and pumps have been gone through. Hour meter is not working but John Deere 6059T engine is estimated to have approximately 4,500 hours on it. Recent oil and filter change. This machine is very clean for it's age and shows very few signs of wear. No major welding, cracks or leaks found. Engine is dry and does not use any oil. Slasher saw works well and has hydraulic butt plate, new teeth and negative kerf set. Self propelled carrier works well. Pins and bushings are in good shape for age, minor play in main to jib boom bushing. Swing gear is in good condition. Joystick controls, very good seat and clean cab. All functions operate as they should. Heat, no A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Lemco 15000 1994
$25,000
Bell Super T Feller Buncher ***SOLD***

Bell Super T Feller Buncher ***SOLD***

1991 Bell Super T Feller Buncher with Saw Head. This buncher has a 4 cyl. Deutz engine, runs and starts good, has a few leaks, strong hydraulics, few hose leaks, boom is in decent condition, 28Lx26 tires with diamond chains, head is in good working order, 24" bar, tight controls. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Bell Super T 1991
$13,500
John Deere 640GII Cable Skidder

John Deere 640GII Cable Skidder

2000 John Deere 640GII Cable Skidder. This skidder runs and starts good, strong hydraulics and cylinders, strong transmission, tight center section, strong winch, solid axles and cradles. 24.5x32 tires with Bear claw chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

John Deere 640GII 2000
$46,900
John Deere 1910E Double Bunk 8 Wheel Forwarder

John Deere 1910E Double Bunk 8 Wheel Forwarder

2014 John Deere 1910E Double Bunk 8 Wheel Forwarder. Hour meter reads 10,000 hours, runs and starts good, pre-heat system. New Turbo, 2 new batteries, new 360 clam, blade. Machine stripped & re-done with 4 wire hose, strong hydraulics and cylinders. Inspected & tested. The differential, tour base, & transfer case oils have all been changed. Tires and tracks are in good order. Heat, A/C, lights, and radio. Original John Deere machine books. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

John Deere 1910E 2014
$239,950
CTR Delimber on Trailer with Topping Saw

CTR Delimber on Trailer with Topping Saw

CTR Delimber on Trailer with Topping Saw in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

CTR - -
$8,500
Timbco T425C Feller Buncher

Timbco T425C Feller Buncher

1999 Timbco T425C Feller Buncher with 40 Tilt Saw Head. Machine has 4,000 estimated hours, new engine 1,000 hours ago, Implement, charge and saw pumps with 1,000 hours, undercarriage is @ 80%. New front idlers, 50 hours on bottom rollers, new sprockets, 28" double grouser pads. Solid boom. Espar heater with Arctic Fox Diesel Fired Coolant Pre-Heater. Leveling cylinders have been recently repacked. Quadco head pictured is not included with the machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timbco T425C 1999
$84,500
Ponsse Processing Operation for Sale - Buffalo & Ergo

Ponsse Processing Operation for Sale - Buffalo & Ergo

Ponsse processing operation for sale. 2014 Ponsse Ergo Harvester and 2015 Ponsse Buffalo 8 Wheel DB Forwarder with timber sales available as well. *2014 Ponsse Ergo Harvester has a H7 Head. This equipment has the Mercedes Benz engine, runs and starts good, all maintenance has been done by Ponsse, 5,500 hours, Pre heater, strong hydraulics and cylinders, crane and squirt boom are in good working order, H7 head and measuring system are in good working condition, 700 tires with tracks. Heat, A/C, and lights. *2015 Buffalo 8 Wheel Forwarder. This machine has a Mercedes Benz engine, runs and starts good, all maintenance has been done by Ponsse, 5,500 hours, Pre heater, strong hydraulics and cylinders, crane and squirt boom are in good working order, K100 crane, 700 tires with tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machines are located in Northcentral USA.

Ponsse Ergo & Buffalo 2014
$Call for Price