| Photo |
Title
|
Make | Model | Year | Price |
|
Ponsse Ergo Harvester2005 Ponsse Ergo Harvester. Hour meter reads 15,500 hours. This unit runs and starts good, has strong hydraulics, & tight pins and bushings. Tight boom, HN125 crane, head is in good working condition. Tires are at 60% with a set of bogie tracks, carriers are at 80%. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2005 |
$85,000
|
|
Tigercat 635G Skidder2020 Tigercat 635G Bogie Skidder. Hour meter reads 5,210 hours. Tigercat FPT N67 Tier 4f engine. 35.5x32 front tires, 30.5x32 rear tires, and 30.5x32 duals all the way around. Tires are estimated at 30%, a few are in good condition and a few could be replaced. All pins & bushings are tight. Espar preheat system. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. |
Tigercat | 635G | 2020 |
$325,000
|
|
Morbark 2355 Flail Chiparvestor2012 Morbark 2355 Flail Chiparvestor. Hour meter reads 17,000 hours. CAT C27 engine that was gone through a few years ago. 3 knife, liners are good, flails are in good condition. New PTO system in 2022. Needs new rubbers inside the flails. Includes spare bearings, conveyor chains, flail rods, & filters. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. |
Morbark | 2355 | 2012 |
$270,000
|
|
Tigercat 630D Skidder ***ON HOLD***2012 Tigercat 630D Grapple Skidder with Winch. Hour meter reads 15,500 hours. Newer engine with 1,500 hours, & fuel injection pump with 1,000 hours. Winch is in good working order. 30.5x32 tires are estimated at 80%, new tires for the rear can be included for an additional cost. Includes ring chains. Webasto preheater. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***ON HOLD*** |
Tigercat | 630D | 2012 |
$Call for Price
|
|
Timberjack 2520 Feller Buncher1996 Timberjack 2520 Feller Buncher. 5.9 Cummins engine. 24" single grouser pads, undercarriage is estimated at 80% with rebuilt pads and like new rails. Hydraulic pumps are good, both hydrostat pumps are also good. Includes bar saw head. Heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Timberjack | 2520 | 1996 |
$12,500
|
|
Timbco 425C Feller Buncher1996 Timbco 425C Feller Buncher with a Timbco Bar Saw Head. This equipment has a 8.3 Cummins engine is strong, Undercarriage is @ 25%, 24" single grouser, strong boom, leveling system seeps over time, Timbco 30" bar saw head is in good order, also has accumulator, heat, A/C is not working. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Timbco | 425C | 1996 |
$27,500
|
|
Tigercat 720C Feller Buncher2000 Tigercat 720C Feller Buncher. Hour meter reads 4,466 hours on a John Deere 6068 engine, runs and starts good. Hydraulic reversible fan, Webasto pre heat system, engine and hydraulic. Strong hydraulics and transmission, tight center section. Tigercat DW5000 Bunching Head, Firestone Forestry Specials 28L x 26 tires 16ply. Heat & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Tigercat | 720C | 2000 |
$39,900
|
|
John Deere 643H Wheel Feller Buncher with Waratah Head2006 John Deere 643H Wheel Feller Buncher with Waratah Head. Hour meter reads 12,686 hours. John Deere 6068 engine. 28Lx26 tires are estimated at 70%. Waratah felling head is in good condition, minimal welds, good disc & teeth. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. |
John Deere | 643H | 2006 |
$26,500
|
|
Komatsu XT445L with Log Max 7000XT Processing Head2022 Komatsu XT445L with Log Max 7000XT Processing Head. 24" single grouser pads, undercarriage is estimated at 90%. Warranty until November of 2024 or 5,000 hours. Komatsu care maintenance until November 2025 or 2,000 hours. Leveling system. Log Max 7000XT processing head is in good condition. Espar preheat system. Heat, A/C, radio, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Komatsu | XT445L | 2022 |
$625,000
|
|
John Deere 1110E Forwarder2013 John Deere 1110E 8 Wheeled Forwarder. Hour meter reads 20,000 hours. 710/45-26.5 tires are estimated at 70%. Crane and center are tight, center pins were done less than 1,000 hours ago, main lift pin was just redone. Espar preheat system. Leveling system works manually but needs new sensors. New windshield and actuator for hood. Espar preheat system. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 1110E | 2013 |
$136,500
|
|
Ponsse Buffalo Forwarder ***SOLD***2022 Ponsse Buffalo 8 Wheeled Forwarder. 1,280 engine hours. Mercedes Benz OM 936 Tier 4f engine. 710/45-26.5 tires are estimated at 90%, includes one set of Olofsfors tracks that are like new. K90+ crane, 10 meter boom with internal hoses, Ponsse 28 grapple, & swing out bunk extensions. Auto-grease system. Webasto preheater. 1,800 factory warranty. Heat, A/C, XM radio, & LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Ponsse | Buffalo | 2022 |
$Call for Price
|
|
Ponsse Elephant 8 Wheeled Forwarder2014 Ponsse Elephant 8 Wheeled Forwarder. Hour meter reads 18,050 hours. Mercedes engine & hydrostatic transmission. 750/55-26.5 tires are estimated at 75%. K100 crane with newer jib cylinder, squirt boom has newer chains. SuperGrip bucket. Webasto preheat system. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Ponsse | Elephant | 2014 |
$143,500
|