| Photo |
Title
|
Make | Model | Year | Price |
|
Prentice 210D Self-Propelled Loader with 60" Siiro SlasherPrentice 210D Self-Propelled Loader with 60" Siiro Slasher. Hour meter reads 16,482 hours. John Deere 6059T engine starts and runs good but will need a head gasket. 60" Siiro Slasher has a cracked blade and the ears that hold the motor will need to be welded. All the cylinders on the boom have been rebuilt. Heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Prentice | 210D | - |
$12,500
|
|
Morbark 30/36 Whole Tree Chipper1998 Morbark 30/36 Whole Tree Chipper with Cab & Loader. Meter reads 1,200 but is incorrect. 425hp engine. New infeed chain, tires are good, wireless remote included. Owner states drum is in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Morbark | 30/36 | 1998 |
$56,500
|
|
Morbark 4600XL Wood Hog Horizontal Grinder2008 Morbark 4600XL Wood Hog Horizontal Grinder. Hour meter reads 4,562 hours. CAT C3412, 760 HP Engine. Repairs completed at 3,280 hours. New Conveyor Belt, Rebuilt Hammermill including new bearings, rotor plates, rotor rods, hammers, inserts, and rakes. The machine is in good condition overall. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Morbark | 4600XL | 2008 |
$270,000
|
|
Valmet 860 Double Bunk 6 Wheel Forwarder2001 Valmet 860 Double Bunk 6 Wheel Forwarder. This machine has a Sisu engine, runs and starts good, strong hydraulics and cylinders, lift cylinder and bucket cylinder have been rebuilt. Cranab 850XL Crane, SureGip grapple, small leak on jib cylinder, few minor leaks on machine. Runs well, has a new computer. Has a mechanical throttle instead of electrical. Front tires are @ 70%, rear tires are @ 45%. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Valmet | 860 | 2001 |
$46,500
|
|
Bandit 2290T Track Chipper2018 Bandit 2290T Track Chipper. Hour meter reads 1,493 hours. Volvo 550 HP engine. Rubber padded single grouser tracks, remote control. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Bandit | 2290T | 2018 |
$339,500
|
|
Vermeer BC1500 Brush Chipper2021 Vermeer BC1500 Brush Chipper. Hour meter reads 246 hours. 15" chipping capacity, 3 knife. Cummins 3.8L diesel engine. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. |
Vermeer | BC1500 | 2021 |
$62,500
|
|
Bandit 19XPC Track Chipper ***ON HOLD***2022 Bandit 19XPC Track Chipper. Hour meter reads 246 hours. John Deere 173hp diesel engine. Caterpillar 305CR rubber track undercarriage. 19" chipping capacity, includes remote control, with tether back-up. Drum is in good condition with 4 knives. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. ***ON HOLD*** |
Bandit | 19XPC | 2022 |
$160,000
|
|
John Deere 748GIII Skidder2006 John Deere 748GIII Skidder. 19,000 frame hours. 30.5x32 tires are estimated at 50%, 2 new sets of chains. Center and arch pins are tight. A/C is not working. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
John Deere | 748GIII | 2006 |
$49,500
|
|
John Deere 803MH with Waratah 622B Harvesting Head2017 John Deere 803MH with Waratah 622B Harvesting Head. Hour meter reads 7,359 hours. 24" single grouser pads, undercarriage is currently being gone through. Waratah 622B is in good condition, measuring system in working order. Espar preheat system. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
John Deere | 803MH | 2017 |
$296,500
|
|
John Deere 1110G 8 Wheel Forwarder2019 John Deere 1110G 8 Wheel Forwarder. Hour meter reads 4,917 hours. 710/45-26.5 tires are estimated at 75%. Includes a set of tracks. Espar preheat system. Center is tight, bunks are straight, one operator. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
John Deere | 1110G | 2019 |
$330,000
|
|
Bandit Intimidator 15XP Chipper2021 Bandit Intimidator 15XP Chipper. Hour meter reads 1,543 hours. Ford 6.2L 165 HP engine. 37" diameter drum, 2 knife split pocket 5/8" chip. Single axle allow for towing as non-CDL trailer. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bandit | Intimidator 15XP | 2021 |
$49,500
|
|
Tigercat 630H Skidder2023 Tigercat 630H Grapple Skidder. Hour meter reads 1,800 hours. 35.5x32 tires are estimated at 80%. Webasto preheat system. 21 cubic foot grapple. Reversing fan. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Tigercat | 630H | 2023 |
$315,000
|