Logging Equipment For Sale

Sort By:

Photo	Title	Make	Model	Year	Price
	Ponsse Ergo with Ponsse H7 Processing Head 2010 Ponsse Ergo with 2015 Ponsse H7 Processing Head. Hour meter reads 23,257 hours. Mercedes engine starts and runs good. 710/55R34 tires on the front are estimated at 70%, 710/45-26.5 tires on the rear are estimated at 50%, includes a set of like new tracks at 90%. Webasto preheat and auto-grease systems. C4 crane. 2015 Ponsse H7 processing head that has been completely rebuilt besides the valving. Ponsse went through the machine in 2022. New swing motor, lift cylinders, pins, bushings, rotator, & hoses. Updated center section with frame lock cylinders. Heat, A/C, radio, comfort grip control and updated computer. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2010	$150,000
	Ponsse Buffalo Forwarder *SOLD* 2021 Ponsse Buffalo Forwarder. Hour meter reads 4,481 hours. Mercedes OM 926 engine. 710/45-26.5 tires are estimated at 60%. Includes a set of tracks that are estimated at 80%, also includes a spare rim and tire. K100+ crane & center are tight, Supergrip 360S grapple. Webasto preheat system. Heat, A/C, radio, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. *SOLD*	Ponsse	Buffalo	2021	$Call for Price
	1987 IRON MULE 5000 1987 IRON MULE 5000 4 CYL FORD STANDARD TRANS LEVER CONTROLS ROTATOR BYPASS BUCKET 23.1-26 RUBBER	Iron Mule	5000	1987	$29,500
	Timbco 820D Forwarder 2001 Timbco 820D Forwarder. Hour meter reads 8,399 hours. Cummins 8.3L engine. 710/45-26.5 tires are estimated at 85%. Originally a clam bunk forwarder, the clam bunk can be included for an additional cost. Center & loader are tight. Blade is in good condition. This unit is setup to be a combo machine, a 2008 Ponsse H8 Harvesting Head with top saw can be included for an additional cost. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA.	Timbco	820D	2001	$152,500
	CTR 42 Bucksaw CTR 42 Bucksaw. Belt driven. In good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	CTR	42	Unknown	$7,500
	John Deere 437D Loader *ON HOLD* 2016 John Deere 437D Loader with 2020 Propac Circle Saw & CTR 264 Delimber. Hour meter reads 9,000 hours. John Deere 6068H, 173hp engine. Boom and grapple are tight, 32' boom reach, fixed heel. Pumps and engine were just rebuilt. New starter, batteries, fuel pump, and radiator within the last year. New muffler this year. 2020 Propac circle saw slasher includes spare disc and main hoses. CTR 264 delimber is in good condition. Trailer lights and brakes are in good working order. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. *ON HOLD*	John Deere	437D	2016	$109,500
	Tigercat 822C Feller Buncher with 5400 Head *SOLD* 2011 Tigercat 822C Feller Buncher with 5400 Head. Hour meter reads 12,412 hours. Cummins engine. 24" double grouser pads, undercarriage is estimated at 90%, less than 500 hours on tracks, 1,400 hours on rollers. Hydraulic pump and drive motors have 1,250 hours. Swing gear was done at 12,170 hours. Boom is tight, hoses are dry. Espar preheat and high rotation wrist. Tigercat 5400 felling head, disc & teeth are in good condition. Fire suppression system & fuel heater. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Tigercat	822C with 5400	2011	$190,000
	John Deere 690ELC Processor 1998 John Deere 690ELC Processor with a Waratah HTH 20 622 Head. This equipment was just gone through approximately 3,000 hours ago, engine, hydraulic pumps and undercarriage. This processor has 16,500 frame hours, tight boom, head is in good working condition, new computer, swing gear is in good condition, heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.	John Deere	690ELC	1998	$39,500
	John Deere 540D Skidder 1988 John Deere 540D Cable Skidder. 9,000 frame hours, 1,000 hours on engine. Rebuilt transmission. Cylinders were repacked, new center pins, radiator, water pump, hydraulic pump, shift linkage, & batteries. Winch recently reconditioned. New front drive shaft and U joints. Includes chains for the front. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	John Deere	540D	1988	$Call for Price
	Stripper Delimber *SOLD* Stripper Delimber. Mechanical pull through delimber, in good shape. Sitting on a metal frame. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA. *SOLD*	Stripper	-	Unknown	$Call for Price
	Bobcat 1080B with 20" Shear Head & Grapple Bobcat 1080B with 20" Shear Head & Grapple. Hour meter reads 5,557 hours. John Deere diesel engine starts and runs good. 15-19 tires are estimated at 80%, includes tracks as well as 4 additional spare tires estimated 50-75%. Log Grapple is in good condition. 20" Shear Head is in good working order. Parts machine is included, has a 5' bucket, engine block is good. Tires on the spare machine are estimated at 35%. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Bobcat	1080B	Unknown	$25,000
	John Deere 440A Skidder John Deere 440A Cable Skidder. John Deere 4 cyl diesel. Power Shift transmission. 18.4-30 tires, 3 are estimated at 75%, 1 at 20%. Set of ring chains included, estimated at 40%. Winch is in good working order, 100' 3/4" mainline with chokers. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	John Deere	440A	Unknown	$16,000