Sort By:   GridGallery
Photo Title
Make Model Year Price
Rottne Rapid SMV 12 Ton 6 Wheel Forwarder ***SOLD***

Rottne Rapid SMV 12 Ton 6 Wheel Forwarder ***SOLD***

1999 Rottne Rapid SMV 12 Ton 6 Wheel Forwarder. This machine has a good running Iveco engine, newer injectors, water pump, and rebuilt injection pump within last 800 hours, 70% ice chains on the front, tracks on the rear that had new grousers welded on last winter. 3 of the 4 bogie tires are like new. RG83 boom that is tight with extended boom. 18,000 hours. Steering pins have some play, has a couple leaks but is overall a pretty dry machine for its age. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Rottne Rapid SMV 1999
$57,500
HAHN HTL 300F Self Propelled Harvester

HAHN HTL 300F Self Propelled Harvester

1993 HAHN HTL 300F Self Propelled Harvester. This machine has a John Deere 6359 turbo engine, runs and starts good, strong hydraulics, hoses are all in good order, tight controls, drive system is in good working condition, new feed chain, delimber knives and measuring system are in good working order, tight controls, topping saw and chain have been repaired, new bar and chain, tight boom and grapple. Cab has heat and good glass. Has service and parts manual. Easy fifth wheel hook up for travel. Tire chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northwest USA.

Hahn HTL 300F 1993
$25,500
Ponsse Ergo Harvester with H7 Head

Ponsse Ergo Harvester with H7 Head

2008 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes engine, runs and starts good, strong hydraulics and cylinders, new conical pins in the crane base and upper and lower in the pillar. 6/20/18 all new pressure hoses, case drain hose and steal lines inside the boom. All new inner and outer swing gear bolts. bogies are in good order. Computer was just cleaned out at Ponsse. 710 tires are good with 1 set of tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2008
$180,000
John Deere 1210E Forwarder ***SOLD***

John Deere 1210E Forwarder ***SOLD***

2012 John Deere 1210E Double Bunk 8 Wheel Forwarder with Rotating Cab and Squirt Boom. ~8,300 hours, very dependable starting and running machine, block heater, bogies are all in good order, minor play in boom, tight controls, tight center section, all cylinders are dry and in good working order, blade, heat, A/C, lights and radio, machine has been very well maintained. New 710 tires all around, good glass, SureGrip grapple. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 1210E 2012
$214,500
Timbco T415 Processor with a 2003 Logmax 7000 Head **SOLD**

Timbco T415 Processor with a 2003 Logmax 7000 Head **SOLD**

1996 Timbco T415 Processor with a 2003 Logmax 7000 Head. This machine has a Cummins engine, runs and starts good, strong hydraulics, and cylinders, tight squirt boom, 32" pads triple grouser, good hoses, feed rollers and grab arms are in good working order, heat, A/C, and Lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timbco T415 1996
$57,500
Caterpillar 559 Loader Slasher and Delimber ***SOLD***

Caterpillar 559 Loader Slasher and Delimber ***SOLD***

2013 Caterpillar 559 Loader Slasher and Delimber TMS Package. This equipment has 7,700 hours. Big John carrier, Rotobec 5052 grapple, Propac 500 ground slasher, CSI 264 delimber. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

CAT 559 2013
$150,000
John Deere 703JH Processor w/ Waratah HTH 622B Head *SOLD*

John Deere 703JH Processor w/ Waratah HTH 622B Head *SOLD*

2014 John Deere 703JH with Waratah HTH 622B Head. This machine has 4,000 hours, Pro-Heat system, undercarriage is @ 90%, strong hydraulics and cylinders, no leaks, tight controls, computer and measuring system are all in good working order. Waratah 622B head has good feed rollers and grab arm, everything is in good working condition. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 703 JH 2014
$289,000
CAT 225 with a Hurricane 50' Stroke Delimber ***SOLD***

CAT 225 with a Hurricane 50' Stroke Delimber ***SOLD***

1987 CAT 225 with a Hurricane 50' Stroke Delimber. This equipment has a CAT 3208 engine, runs and starts good, undercarriage is @ 50%, delimber has a newer stroker, chain rollers and knives, strong hydraulics and cylinders - few minor leaks. New drive motor, straight boom, 24" pads, & joystick controls. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

CAT 225 1987
$16,500
TimberPro TL745C Feller Buncher ***SOLD***

TimberPro TL745C Feller Buncher ***SOLD***

2015 TimberPro TL745C Feller Buncher with a Quadco 22C 360 degree rotate felling head. This machine has a Cummins engine, runs and starts good, 2,850 hours, has some warranty remaining, strong hydraulics, leveling system is in good order, undercarriage estimated @ 80%, 24" single grouser pads, Quadco felling head is in good working order. Boom pins and bushings in good order. Pre-heat system, air ride seat, heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada. ***SOLD***

Timberpro TL745C 2015
$349,000
Volvo 2421C Processor with a QS500 South Star Head

Volvo 2421C Processor with a QS500 South Star Head

2013 Volvo 2421C Processor with a QS500 South Star Head. This machine has a newer Volvo engine with ~3,000 hours, runs and starts good, Espar heating system, strong hydraulics and cylinders, solid boom, undercarriage is @ 70%, QS500 head and computer are in good working order, tight control, heat, A/C, and lights. A/C will need new compressor. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Volvo 2421C 2013
$239,000
Franklin 132 Skidder

Franklin 132 Skidder

1972 Franklin 132 Cable Skidder. This skidder has a Detroit 353 engine, runs and starts good, manual 4 speed transmission with HI/LOW. Franklin winch will need cable, has some play, few leaks. 28Lx26 tires with dual rims. Contact Erik @ Red Pine Equipment 218-720-0933. Skidder is located in Southeast USA.

Franklin 132 1972
$Call for Price
Ponsse Ergo Harvester with a H73 Head

Ponsse Ergo Harvester with a H73 Head

2005 Ponsse Ergo Harvester with a H73 Head. This machine has a HN125 Crane, 19,000 hours, runs and starts good, tracks are @ 60%. New CPU, wiring on boom and head replaced last year, new feed rollers & chain auto tensioner last year, leveling system redone, new module and valves, fire suppression, new measuring system, new knives last year, heat, and A/C, all lights are operable. Camo covering on sheet metal. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2005
$110,000