1994 Morbark 23NCL Whole Tree Chipper. 850 HP CAT 3412 with 4,600 hours on in-frame overhaul. Top feed chute. Front of engine resealed. New drive belt and Poly chain. Does not burn any oil. Starts well in cold weather. Cooling system in good shape. Clutch in good shape. All new liners in 2021 on the chipper. Babbit 8 knife system installed. New remote system installed that controls all moving parts on the chipper. 8 knife disc is in good shape, set up for 7/8" chips. AR 450 face plates on disc less than 3 years old. New bearings on feed rollers, sprockets and chains recently replaced. Frame is in good shape. Air compressor included. Tires are in good shape and owner will check hubs and brakes at time of sale. Chipper was converted from a WCL, professionally done. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is lcoated in Canada.

1984 John Deere 640 Grapple Skidder with Winch. Hours unknown. John Deere 6068T engine starts and runs good. 28Lx26 tires are estimated at 55% for the rears, 10% for the fronts. Includes a set of a double diamond studded ice chains. Possibly needs shims, has a little play in the arch. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

2018 KMC 2500 Track Grapple Skidder with a Winch. Hour meter reads 744 hours. Cummins 6BTA 5.9 Tier III engine with 174 HP, Clark 4 Speed Powershift Transmission. Joystick controls. Max Speed: 14.5 MPH. Max Payload: 35,000 lbs. 46,000lb machine. Young Grapple with a Clark Winch with a 1" mainline. Newer 18" track that has 250 hours, estimated at 95%. Extra pads and track tighteners are included. New starter. Enclosed cab with heat & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

2012 John Deere 1270E 6W Processor with Waratah 616C Processing Head. Hour meter reads 14,112 hours. John Deere 6090 engine, hydrostatic transmission. 710/55-R34 tires are estimated at 80%, 600 tires are estimated at 70%. CH7 crane is tight. New windshield & main lift cylinder. Waratah 616C - went through a full rebuild at 9,500 hours. Self leveling cab with heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

2010 CAT 501HD with PF48 4 Roller Processing Head. Hour meter reads 9,300 hours. CAT C6.6 engine starts and runs good. 24" double grouser pads, undercarriage is estimated at 60%. Two new delimbing cylinders, measuring wheel, encoder. New data line from the computer to the head, and final drive. Fully serviced, ready to work. Heat, A/C, lights, & satellite radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

1994 Timberjack 230A Forwarder. Cummins 4BT engine has been rebuilt. 28Lx26 tires, rears are estimated at 80%, fronts fronts estimated at 25%. Bunks are in good condition. Heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.