Sort By:   GridGallery
Photo Title
Make Model Year Price
Bobcat 1080C with Shear Head

Bobcat 1080C with Shear Head

Bobcat 1080C with Shear Head. Hour meter reads 3,300 hours. Tires are estimated at 75%. Includes a set of tracks. Shear head is in good condition. Heat & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Bobcat 1080C -
$24,500
Komatsu 220LC with Limmit 2100 Delimber

Komatsu 220LC with Limmit 2100 Delimber

2009 Komatsu 220LC with Limmit 2100 Delimber. Hour meter reads 13,032 hours. New boom at 11,000 hours, and new cables & hoses at 12,800 hours. 32" triple grouser pads, undercarriage is estimated at 80%. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Komatsu 220LC 2009
$57,500
Timberjack 560D Skidder

Timberjack 560D Skidder

2003 Timberjack 560D Dual Arch Grapple Skidder. 11,000 frame hours. 6,500 hours on new engine and transmission, both were replaced at 4,500 hours. Cummins 8.3L starts and runs good. 30.5x32 tires, rear tires estimated at 10%, front tires estimated at 30%, includes diamond ice chains. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timberjack 560D 2003
$38,900
TimberPro TN725B with Rolly II Harvesting Head

TimberPro TN725B with Rolly II Harvesting Head

2011 TimberPro TN725B Harvester with Rolly II Harvesting Head. Hour meter reads 8,491 hours. Cummins 8.3L starts and runs good. 24" single grouser pads, undercarriage is estimated at 95% with 300 hours, new final & drive pump in November 2023. Gear box for the pumps was rebuilt June 2024. Rolly II harvesting head is in good condition & working order. Proheat preheater. 2nd owner machine, rebuilt final drive motor and other parts to be included. Heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timberpro TN 725B 2011
$215,000
Bell Super T with Dangle Head

Bell Super T with Dangle Head

1995 Bell Super T with Dangle Head. Deutz 4 cylinder air cooled diesel engine. New orbit motor in the head. Equipment is in good working order. 23.1 x 26 tires are estimated at at 25%. Rings chains estimated at 40% are included. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Bell Super T 1995
$18,500
Ponsse Ergo Harvester with Ponsse H7 Harvesting Head

Ponsse Ergo Harvester with Ponsse H7 Harvesting Head

2013 Ponsse Ergo 6 Wheeled Harvester with Ponsse H7 Harvesting Head. Hour meter reads 7,323 hours, ECM was replaced at 3,000 hours, frame hours are 10,300 hours. 710/45-26.5 bogie tires at 80%, tracks are estimated at 80%. 700/34-26.5 tires are estimated at 75%. C5 crane, external hoses, auto--grease system. H7 harvesting head has all newer feed motors, with 1,500 hours. Re-pinned and re-bushed 1,500 hours ago. Webasto preheater. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2013
$255,000
Timberjack 240A Skidder

Timberjack 240A Skidder

1989 Timberjack 240A Cable Skidder. Cummins 4BT engine - starts and runs good. 23.1x26 tires. Includes 2 sets of chains in average condition. Cradle and center pins are tight, blade pins have a little play. New exhaust & rebuilt winch. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timberjack 240A 1989
$32,500
Chambers Delimbinator

Chambers Delimbinator

Chambers Delimbinator. Hour meter reads 3,826 hours. Floor is in good condition. Recently serviced, with new bearings on the drum. All new chains, & includes 4 buckets of chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Chambers Delimbinator Unknown
$57,500
Timberking TK560DS Loader with Propac 60" Slasher

Timberking TK560DS Loader with Propac 60" Slasher

2008 Timberking TK560DS Loader. Hour meter reads 10,862 hours. Perkins 6cyl diesel engine. Boom is tight, live heel, hydraulic landing gear is in good working order. Propac 60" Slasher has a good blade and teeth. SureGrip joystick controls. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Timberking TK560DS 2008
$50,000
John Deere 748GIII Skidder

John Deere 748GIII Skidder

2000 John Deere 748GIII Grapple Skidder with Winch. Hour meter reads 19,000 hours. John Deere 6081H engine, power-shift transmission. 30.5x32 tires are estimated at 80%.Fresh service & paint. Has been used to pull logs across a field. Winch works well, grapple is tight, blade in good condition. Heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 748GIII 2000
$42,500
TimberKing TK458 Forwarder ***ON HOLD***

TimberKing TK458 Forwarder ***ON HOLD***

2005 TimberKing TK458 8 Wheeled Forwarder. Hour meter reads 23,413 hours. John Deere 6068 engine starts and runs good. Brand new torque converter & rebuilt bogie. 700 tires are estimated at 80%, two of them are estimated at 25%. Includes a like new set of tracks and new double diamond studded ice chains. Fire suppression and preheat systems. Heat, A/C, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***ON HOLD***

Timberking TK458 2005
$72,500
International with Serco 170 & Siiro 60" Slasher

International with Serco 170 & Siiro 60" Slasher

1987 International with 1992 Serco 170 & 60" Siiro Slasher. Big cam Cummins in the truck, odometer reads 593,740 miles. Eaton fuller transmission. Serco 170 has a newer John Deere 6068 engine with 3,500 hours, meter reads 8,800 hours. 500 hours on a newer pump. Loader needs a couple push rods in the motor. Siiro 60" slasher, blade has extra teeth and rivets. Slasher table motor needs a new seal. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Serco 170 1992
$14,500