Sort By:   GridGallery
Photo Title
Make Model Year Price
Ponsse Ergo Harvester with a H73E Harvesting Head

Ponsse Ergo Harvester with a H73E Harvesting Head

2005 Ponsse Ergo Harvester with a H73E Harvesting Head. This machine has a Mercedes Benz engine, runs and starts good, 17,000 hours, pre-heat system, strong hydraulics and cylinders, new main pump at 13,500 hours, new joystick controls, old ones to go with as spares, tight boom, H200 crane, 710 tires with Eco track and a set of rear chains. Head and measuring system are in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA

Ponsse Ergo 2005
$98,000
TimberPro TL735-B Processor with Logmax 7000XT Fixed Head

TimberPro TL735-B Processor with Logmax 7000XT Fixed Head

2014 TimberPro TL735-B Processor with Logmax 7000XT Fixed Head. This machine has a Cummins tier 3 300 HP engine, runs and starts good. 8,100 hours. New injectors, oil pan gasket, and rear engine seal. Pumps resealed and checked. Espar heat engine and hydraulics. Pump drive new input shaft and bearings. All regular maintenance done on schedule, oils changed every 1,000 hours, engine oil every 500 hours. Undercarriage is @ 50%, 24" double grouser pads. Processor head is stronger and more productive than other fixed heads. New Logmate 500 computer and head module. $40,000 in recent updates and work done on machine. New roto bearing on head, new saw motor, new saw bar holder, auto level option, new leveling cylinders, new A/C pump. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberpro TL735-B 2014
$289,000
Tigercat 822C Feller Buncher

Tigercat 822C Feller Buncher

2004 Tigercat 822C Feller Buncher. This machine had a new engine installed 700 hours ago, 360 head, undercarriage is in good working order, strong hydraulics and cylinders, tight boom, head in good working condition, straight blade, tight controls. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Tigercat 822C 2004
$99,500
John Deere 848H Skidder

John Deere 848H Skidder

2009 John Deere 848H Dual Arch Skidder. This equipment has a total rebuild on engine with 0 hours on it. Differentials done 1,000 hours ago. Good chains and tires. 12,068 frame hours. Heat, A/C, and lights. Chains all around. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 848H 2009
$94,500
Peterson Pacific 4700B Horizontal Grinder

Peterson Pacific 4700B Horizontal Grinder

Salvage Peterson Pacific 4700B Horizontal Grinder. This equipment has many good parts. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Peterson Pacific 4700B -
$Call for Price
Salvage Peterson 4800E Flail Debarker

Salvage Peterson 4800E Flail Debarker

Salvage Peterson 4800E Flail Debarker. This equipment has an engine but will need to be rebuilt, flail and chains, cylinders, many good parts, in-feed and out-feed rollers. Good machine for parts or could be rebuilt. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Peterson Pacific 4800E -
$Call for Price
Mobark 2355 Flail Total Chip Harvester

Mobark 2355 Flail Total Chip Harvester

2008 Mobark 2355 Flail Total Chip Harvester. This machine has 10,000 hours, 3412E CAT engine, runs and starts good, strong hydraulics, Morlift 500 loader, debarker is in good working order, discharge conveyor, tilt cab. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Morbark 2355 2008
$199,500
Rottne F15 8 Wheel Forwarder ***SOLD***

Rottne F15 8 Wheel Forwarder ***SOLD***

2011 Rottne F15 Double Bunk 8 Wheel Forwarder. Hour meter reads 8,566 hours, John Deere engine, runs and starts good, new head and EGR, heavier head studs, all gaskets replaced less than 1,000 ago, Webasto pre heater, engine hydraulics and cab. Complete crane tower updates have been done, double squirt boom, SuperGrip grapple, strong hydraulics and cylinders. 2 new tires 710, the others are @ 75% with set of 5/8 DD chains. Heat, A/C, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Rottne F15 2011
$Call for Price
John Deere 703G Feller Buncher

John Deere 703G Feller Buncher

2006 John Deere 703G Feller Buncher with a GN Roy 21" 360 Head. Hour meter reads 13,000 hours, machine has new saw bearings, strong hydraulic cylinders, pumps replaced 1,500 hours ago, undercarriage is @ 70%. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

John Deere 703G 2006
$Call for Price
John Deere 648GIII Skidder

John Deere 648GIII Skidder

2006 John Deere 648GIII Dual Arch Grapple Skidder. This equipment has 400 hours on a rebuilt engine, runs and starts good, strong hydraulics and cylinders, decent center section, new grapple pins. New rear tires and chains, front tires and chains are @ 85%, 30.5x32 tires, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

John Deere 648GIII 2006
$Call for Price
Hitachi with a 453 Propac Delimber

Hitachi with a 453 Propac Delimber

2002 Hitachi with a 453 Propac Delimber. 14,000 frame hours. 400-600 hours on new engine, New engine last spring, newer blade on topping saw, good undercarriage, tight machine, working daily. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hitachi 453 2002
$54,900
CAT 529 Log Loader

CAT 529 Log Loader

2006 CAT 529 Log Loader. Hour meter reads 7600 hours, runs and starts good, strong hydraulics and cylinders, tight boom, 360 grapple, carrier has good tires and brakes. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

CAT 529 2006
$35,500